If LK3 is installed then the channels may be individually
inhibited at the receiver output.
If LK3 is not installed then all outputs are enabled.
Parsed from file IRT4230MMx-MIB.my.txt
Company: irtelectronics
Module: IRT4230MMx-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
irt4230Lk3State OBJECT-TYPE SYNTAX INTEGER { installed(1), notInstalled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If LK3 is installed then the channels may be individually inhibited at the receiver output. If LK3 is not installed then all outputs are enabled." ::= { irt4230MMx 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16557.3.2.5.0 | irt4230Lk3State | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16557.3.2.1 | irt4230Alarms | 1 | 1 | The current state of the Urgent and Non Urgent alarms. inputLoss, ais and syncLoss are only available for a MMX-4230. |
| 1.3.6.1.4.1.16557.3.2.2 | irt4230ChannelTable | 1 | 7 | None |
| 1.3.6.1.4.1.16557.3.2.3 | irt4230ChannelAllocSwitch | 1 | 1 | The value to which the Channel Bandwidth Allocation Switch has been set in a MMM-4230. The MMX-4230 does not have a Bandwidth All… |
| 1.3.6.1.4.1.16557.3.2.4 | irt4230ChannelAlloc | 1 | 1 | The actual value being used by an MMM-4230 module for Channel Bandwidth Allocation. An MMX-4230 will always report 'remote(15)' |
| 1.3.6.1.4.1.16557.3.2.6 | irt4230ReedSolomon | 1 | 1 | If LK2 is installed in the MMX-4230 then the Output Packet is always contains ReedSolomon Code. If LK2 is not installed then the … |
| 1.3.6.1.4.1.16557.3.2.7 | irt4230Framing | 1 | 1 | If LK4 is installed then the DS3 signal is framed. Otherwise the DS3 is treated as unframed. |
| 1.3.6.1.4.1.16557.3.2.8 | irt4230G703State | 1 | 1 | If LK5 is installed in a MMM-4230 then the G703 signal is Low (Shaped), otherwise it is High (DSX). If LK5 is installed in a MMX-… |
| 1.3.6.1.4.1.16557.3.2.9 | irt4230FpgaVersion | 1 | 1 | The software version of the main FPGA in the format 'x.y' where x is the major revision number and y is the minor revision. |
| 1.3.6.1.4.1.16557.3.2.10 | irt4230Reset | 1 | 1 | Writing a 2 to this object will cause the agent to reset. |
| 1.3.6.1.4.1.16557.3.2.11 | irt4230Trap | 1 | 1 | An indication whether traps are enabled from this module. |
| 1.3.6.1.4.1.16557.3.2.12 | irt4230RsErrors | 1 | 1 | The total of all ReedSolomomn errors detected at the MMX-4230 for all channels plus the data channel. This total may be set to ze… |