Description 1
Specific that the rule applies to the ip protocol id and the range of options behind the IP header.
OID reference
1.3.6.1.4.1.171.11.5.2.2.1.13
Specific that the rule applies to the ip protocol id and the range of options behind the IP header.
Identification
{1 3 6 1 4 1 171 11 5 2 2 1 13}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SW-DES3x50-ACLMGMT-MIB, the row index consists of these components in order:
swACLIpRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.swACLIpRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.5.2.2.1.13.<swACLIpRuleProfileID>.<swACLIpRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.5.2.2.1.13
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
swACLIpRuleUserMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specific that the rule applies to the ip protocol id and the range of
options behind the IP header."
::= { swACLIpRuleEntry 13 }swACLIpRuleProtoID OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specific that the rule applies to the value of ip protocol id traffic"
::= { swACLIpRuleEntry 13 }swACLIpRuleUserMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { swACLIpRuleEntry 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specific that the rule applies to the ip protocol id and the range of options behind the IP header.
Description 2
Specific that the rule applies to the value of ip protocol id traffic
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swACLIpRuleUserMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleUserMask",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"4",
")",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specific that the rule applies to the ip protocol id and the range of options behind the IP header.\"",
"::=",
"{",
"swACLIpRuleEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specific that the rule applies to the ip protocol id and the range of options behind the IP header."
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: swACLIpRuleProtoID
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleProtoID",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specific that the rule applies to the value of ip protocol id traffic\"",
"::=",
"{",
"swACLIpRuleEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specific that the rule applies to the value of ip protocol id traffic"
],
null,
null,
null,
null
]
}Module: SW-DES3x50-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-DES3x50-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLIpRuleUserMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleUserMask",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"4",
")",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"\"",
"::=",
"{",
"swACLIpRuleEntry",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
""
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.5.2.2.1.1 | swACLIpRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.2 | swACLIpRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.3 | swACLIpRuleVlan | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.4 | swACLIpRuleSrcIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.5 | swACLIpRuleDstIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.6 | swACLIpRuleDscp, swACLIpRuleDscpOrTos | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.7 | swACLIpRuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.8 | swACLIpRuleType | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.9 | swACLIpRuleCode | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.10 | swACLIpRuleSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.11 | swACLIpRuleDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.12 | swACLIpRuleFlagBits, swACLIpRuleProtoID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.14 | swACLIpRuleUserMask, swACLIpRuleEnablePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.15 | swACLIpRuleEnablePriority, swACLIpRulePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.16 | swACLIpRulePriority, swACLIpRuleReplacePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.17 | swACLIpRuleReplacePriority, swACLIpRuleEnableReplaceDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.18 | swACLIpRuleEnableReplaceDscp, swACLIpRuleRepDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.19 | swACLIpRuleRepDscp, swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.20 | swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.21 | swACLIpRuleRowStatus, swACLIpRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.22 | swACLIpRuleRowStatus | 0 | 0 |