Description 1
Indicate weather the DSCP field can be over-write or not.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.11.5.2.2.1.18
Indicate weather the DSCP field can be over-write or not.
Identification
{1 3 6 1 4 1 171 11 5 2 2 1 18}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1 |
| 2 | disabled | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SW-DES3x50-ACLMGMT-MIB, the row index consists of these components in order:
swACLIpRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.swACLIpRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.5.2.2.1.18.<swACLIpRuleProfileID>.<swACLIpRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: swACLIpRuleProfileID, swACLIpRuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.5.2.2.1.18
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swACLIpRuleEnableReplaceDscp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate weather the DSCP field can be over-write or not. "
::= { swACLIpRuleEntry 18 }swACLIpRuleRepDscp OBJECT-TYPE
SYNTAX INTEGER(0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"specify a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet."
::= { swACLIpRuleEntry 18 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Indicate weather the DSCP field can be over-write or not.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swACLIpRuleEnableReplaceDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleEnableReplaceDscp",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicate weather the DSCP field can be over-write or not. \"",
"::=",
"{",
"swACLIpRuleEntry",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicate weather the DSCP field can be over-write or not."
],
null,
null,
null,
null
]
}Module: SW-DES3x50-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-DES3x50-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLIpRuleRepDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleRepDscp",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"63",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.\"",
"::=",
"{",
"swACLIpRuleEntry",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
63
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet."
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.5.2.2.1.1 | swACLIpRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.2 | swACLIpRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.3 | swACLIpRuleVlan | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.4 | swACLIpRuleSrcIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.5 | swACLIpRuleDstIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.6 | swACLIpRuleDscp, swACLIpRuleDscpOrTos | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.7 | swACLIpRuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.8 | swACLIpRuleType | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.9 | swACLIpRuleCode | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.10 | swACLIpRuleSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.11 | swACLIpRuleDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.12 | swACLIpRuleFlagBits, swACLIpRuleProtoID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.13 | swACLIpRuleProtoID, swACLIpRuleUserMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.14 | swACLIpRuleUserMask, swACLIpRuleEnablePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.15 | swACLIpRuleEnablePriority, swACLIpRulePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.16 | swACLIpRulePriority, swACLIpRuleReplacePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.17 | swACLIpRuleReplacePriority, swACLIpRuleEnableReplaceDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.19 | swACLIpRuleRepDscp, swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.20 | swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.21 | swACLIpRuleRowStatus, swACLIpRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.22 | swACLIpRuleRowStatus | 0 | 0 |