Description 1
Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.11.5.2.2.1.16
Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.
Identification
{1 3 6 1 4 1 171 11 5 2 2 1 16}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1 |
| 2 | disabled | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SW-DES3x50-ACLMGMT-MIB, the row index consists of these components in order:
swACLIpRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.swACLIpRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.5.2.2.1.16.<swACLIpRuleProfileID>.<swACLIpRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.5.2.2.1.16
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
swACLIpRuleReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { swACLIpRuleEntry 16 }swACLIpRulePriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access profile will apply to packets that contain
this value in their 802.1p priority field of their header."
::= { swACLIpRuleEntry 16 }swACLIpRuleReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specific the packets that match the access profile will changed the
802.1p priority tag field by the switch or not ."
::= { swACLIpRuleEntry 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not .
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swACLIpRuleReplacePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleReplacePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"\"",
"::=",
"{",
"swACLIpRuleEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
""
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: swACLIpRulePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRulePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"7",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.\"",
"::=",
"{",
"swACLIpRuleEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header."
],
null,
null,
null,
null
]
}Module: SW-DES3x50-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: SW-DES3x50-ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLIpRuleReplacePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLIpRuleReplacePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not .\"",
"::=",
"{",
"swACLIpRuleEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not ."
],
null,
null,
null,
null
]
}Module: SW-ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlink-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.5.2.2.1.1 | swACLIpRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.2 | swACLIpRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.3 | swACLIpRuleVlan | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.4 | swACLIpRuleSrcIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.5 | swACLIpRuleDstIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.6 | swACLIpRuleDscp, swACLIpRuleDscpOrTos | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.7 | swACLIpRuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.8 | swACLIpRuleType | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.9 | swACLIpRuleCode | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.10 | swACLIpRuleSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.11 | swACLIpRuleDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.12 | swACLIpRuleFlagBits, swACLIpRuleProtoID | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.13 | swACLIpRuleProtoID, swACLIpRuleUserMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.14 | swACLIpRuleUserMask, swACLIpRuleEnablePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.15 | swACLIpRuleEnablePriority, swACLIpRulePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.17 | swACLIpRuleReplacePriority, swACLIpRuleEnableReplaceDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.18 | swACLIpRuleEnableReplaceDscp, swACLIpRuleRepDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.19 | swACLIpRuleRepDscp, swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.20 | swACLIpRulePermit, swACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.21 | swACLIpRuleRowStatus, swACLIpRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.11.5.2.2.1.22 | swACLIpRuleRowStatus | 0 | 0 |