Description 1
Specifies that the access rule will apply only to port(s).
OID reference
1.3.6.1.4.1.171.12.9.3.3.1.14
Specifies that the access rule will apply only to port(s).
Identification
{1 3 6 1 4 1 171 12 9 3 3 1 14}
Definitions may combine these properties differently.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 8 distinct definitions; some records may not include a definition.
swACLPktContRulePort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will apply only to port(s)."
::= { swACLPktContRuleEntry 14 }swACLPktContRulePort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleVID can not be set together. "
::= { swACLPktContRuleEntry 14 }swACLPktContRulePort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleVID can not be set together. "
::= { swACLPktContRuleEntry 14 }swACLPktContRulePort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access will apply to only to port(s)."
::= { swACLPktContRuleEntry 14 }swACLPktContRulePort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access will apply to only to port(s)."
::= { swACLPktContRuleEntry 14 }swACLPktContRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { swACLPktContRuleEntry 14 }swACLPktContRulePort OBJECT-TYPE
-- SYNTAX INTEGER (1..65535)
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will only apply to port(s)."
::= { swACLPktContRuleEntry 14 }swACLPktContRuleOffsetIndex3 OBJECT-TYPE
SYNTAX INTEGER(0..76)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the third offset will apply in getting the mask for this rule."
::={ swACLPktContRuleEntry 14 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies that the access rule will apply only to port(s).
Description 2
Specifies that the access rule will only apply to port(s). This object and swACLPktContRuleVID can not be set together.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 3
Specifies that the access will apply to only to port(s).
Description 4
This object indicates the status of this entry.
Description 5
Specifies that the access rule will only apply to port(s).
Description 6
Specifies the third offset will apply in getting the mask for this rule.
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: swACLPktContRulePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRulePort",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access rule will apply only to port(s).\"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access rule will apply only to port(s)."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Module: ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRulePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRulePort",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access rule will only apply to port(s). This object and swACLPktContRuleVID can not be set together. \"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access rule will only apply to port(s). This object and swACLPktContRuleVID can not be set together."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Module: ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRulePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRulePort",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access will apply to only to port(s).\"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access will apply to only to port(s)."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Module: ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRuleRowStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRuleRowStatus",
"OBJECT-TYPE",
"SYNTAX",
"RowStatus",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the status of this entry.\"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"row",
"RowStatus"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the status of this entry."
],
null,
null,
null,
null
]
}Module: ACL-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRulePort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRulePort",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access rule will only apply to port(s).\"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access rule will only apply to port(s)."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRuleOffsetIndex3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRuleOffsetIndex3",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"76",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the third offset will apply in getting the mask for this rule.\"",
"::=",
"{",
"swACLPktContRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
76
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the third offset will apply in getting the mask for this rule."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.9.3.3.1.1 | swACLPktContRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.2 | swACLPktContRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.3 | swACLPktContRuleOffset0to15 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.4 | swACLPktContRuleOffset16to31 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.5 | swACLPktContRuleOffset32to47 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.6 | swACLPktContRuleOffset48to63 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.7 | swACLPktContRuleOffset64to79 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.8 | swACLPktContRuleEnablePriority, swACLPktContRuleOffsetIndex1 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.9 | swACLPktContRulePriority, swACLPktContRuleMask1 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.10 | swACLPktContRuleReplacePriority, swACLPktContRuleData1 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.11 | swACLPktContRuleEnableReplaceDscp, swACLPktContRuleOffsetIndex2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.12 | swACLPktContRuleRepDscp, swACLPktContRuleMask2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.13 | swACLPktContRulePermit, swACLPktContRuleData2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.15 | swACLPktContRuleRowStatus, swACLPktContRuleMask3 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.16 | swACLPktContRuleOwner, swACLPktContRuleData3 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.17 | swACLPktContRuleRxRate, swACLPktContRuleOffsetIndex4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.18 | swACLPktContRuleEnableReplaceTosPrecedence, swACLPktContRuleMask4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.19 | swACLPktContRuleRepTosPrecedence, swACLPktContRuleData4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.20 | swACLPktContRuleVID, swACLPktContRuleOffsetIndex5 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.21 | swACLPktContRuleMask5, swACLPktContRuleMirrorGroupID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.22 | swACLPktContRuleData5, swACLPktContRuleRedirectPort, swACLPktContRuleRedirectEgressPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.23 | swACLPktContRuleURPFStateCheck | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.24 | swACLPktContRulePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.28 | swACLPktContRuleRxRate | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.29 | swACLPktContRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.30 | swACLPktContRulePort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.32 | swACLPktContRuleTimeRange | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.33 | swACLPktContRuleRowStatus | 0 | 0 |