Description 1
Specifies that the access will apply only to packets with priority value.
OID reference
1.3.6.1.4.1.171.12.9.3.3.1.8
Specifies that the access will apply only to packets with priority value.
Identification
{1 3 6 1 4 1 171 12 9 3 3 1 8}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1 |
| 2 | disabled | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ACLMGMT-MIB, the row index consists of these components in order:
swACLPktContRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.swACLPktContRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.12.9.3.3.1.8.<swACLPktContRuleProfileID>.<swACLPktContRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.9.3.3.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
swACLPktContRuleEnablePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access will apply only to packets with
priority value."
::= { swACLPktContRuleEntry 8 }swACLPktContRuleOffsetIndex1 OBJECT-TYPE
SYNTAX INTEGER(0..76)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the first offset will apply in getting the mask for this rule."
::={ swACLPktContRuleEntry 8 }swACLPktContRuleEnablePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will apply only to packets with this
priority value."
::= { swACLPktContRuleEntry 8 }swACLPktContRuleEnablePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies that the access rule will apply only to packets with this
priority value."
::= { swACLPktContRuleEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies that the access will apply only to packets with priority value.
Description 2
Specifies the first offset will apply in getting the mask for this rule.
Description 3
Specifies that the access rule will apply only to packets with this priority value.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: swACLPktContRuleEnablePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRuleEnablePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access will apply only to packets with priority value.\"",
"::=",
"{",
"swACLPktContRuleEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access will apply only to packets with priority value."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Module: ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRuleOffsetIndex1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRuleOffsetIndex1",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"76",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the first offset will apply in getting the mask for this rule.\"",
"::=",
"{",
"swACLPktContRuleEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
76
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the first offset will apply in getting the mask for this rule."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Status in source: current.
Names: swACLPktContRuleEnablePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swACLPktContRuleEnablePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies that the access rule will apply only to packets with this priority value.\"",
"::=",
"{",
"swACLPktContRuleEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies that the access rule will apply only to packets with this priority value."
],
null,
null,
null,
null
]
}Module: ACLMGMT-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Module: ACLMGMT-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.9.3.3.1.1 | swACLPktContRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.2 | swACLPktContRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.3 | swACLPktContRuleOffset0to15 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.4 | swACLPktContRuleOffset16to31 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.5 | swACLPktContRuleOffset32to47 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.6 | swACLPktContRuleOffset48to63 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.7 | swACLPktContRuleOffset64to79 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.9 | swACLPktContRulePriority, swACLPktContRuleMask1 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.10 | swACLPktContRuleReplacePriority, swACLPktContRuleData1 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.11 | swACLPktContRuleEnableReplaceDscp, swACLPktContRuleOffsetIndex2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.12 | swACLPktContRuleRepDscp, swACLPktContRuleMask2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.13 | swACLPktContRulePermit, swACLPktContRuleData2 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.14 | swACLPktContRulePort, swACLPktContRuleOffsetIndex3, swACLPktContRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.15 | swACLPktContRuleRowStatus, swACLPktContRuleMask3 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.16 | swACLPktContRuleOwner, swACLPktContRuleData3 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.17 | swACLPktContRuleRxRate, swACLPktContRuleOffsetIndex4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.18 | swACLPktContRuleEnableReplaceTosPrecedence, swACLPktContRuleMask4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.19 | swACLPktContRuleRepTosPrecedence, swACLPktContRuleData4 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.20 | swACLPktContRuleVID, swACLPktContRuleOffsetIndex5 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.21 | swACLPktContRuleMask5, swACLPktContRuleMirrorGroupID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.22 | swACLPktContRuleData5, swACLPktContRuleRedirectPort, swACLPktContRuleRedirectEgressPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.23 | swACLPktContRuleURPFStateCheck | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.24 | swACLPktContRulePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.28 | swACLPktContRuleRxRate | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.29 | swACLPktContRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.30 | swACLPktContRulePort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.32 | swACLPktContRuleTimeRange | 0 | 0 | |
| 1.3.6.1.4.1.171.12.9.3.3.1.33 | swACLPktContRuleRowStatus | 0 | 0 |