OID reference
1.3.6.1.4.1.171.14.28.1.3.3.1.14
This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOp…
Identification
{1 3 6 1 4 1 171 14 28 1 3 3 1 14}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: dAclIpAccessListName, dAclIpAccessRuleSn.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.28.1.3.3.1.14
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dAclIpAccessRuleDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the destination port number of TCP/UDP protocol.
If the value is -1, it means the value is not specified.
If the dAclIpAccessRuleDstOperator object in the same row is
range(6), this object will be the starting port number of the port
range.
This object only can be configured dAclIpAccessRuleDstOperator in
the same row is not 'none(1)'."
::= { dAclIpAccessRuleEntry 14 }dAclIpAccessRuleDstPort OBJECT-TYPE
SYNTAX Integer32 (-1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the destination port number of TCP/UDP protocol.
If the value is -1, it means the value is not specified.
If the dAclIpAccessRuleDstOperator object in the same row is
range(6), this object will be the starting port number of the port
range.
This object only can be configured dAclIpAccessRuleDstOperator in
the same row is not 'none(1)'."
DEFVAL { -1 }
::= { dAclIpAccessRuleEntry 14 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOperator in the same row is not 'none(1)'.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dAclIpAccessRuleDstPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dAclIpAccessRuleDstPort",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOperator in the same row is not 'none(1)'.\"",
"::=",
"{",
"dAclIpAccessRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOperator in the same row is not 'none(1)'."
],
null,
null,
null,
null
]
}Module: DLINKSW-ACL-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Status in source: current.
Names: dAclIpAccessRuleDstPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dAclIpAccessRuleDstPort",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOperator in the same row is not 'none(1)'.\"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"dAclIpAccessRuleEntry",
"14",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the destination port number of TCP/UDP protocol. If the value is -1, it means the value is not specified. If the dAclIpAccessRuleDstOperator object in the same row is range(6), this object will be the starting port number of the port range. This object only can be configured dAclIpAccessRuleDstOperator in the same row is not 'none(1)'."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Module: DLINKSW-ACL-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Same file in DXS-3400_MIB_R1.00.B040.zip.
Same file in DXS3400_MIB_20181212.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Registration