OID reference
1.3.6.1.4.1.171.14.28.1.3.3.1.19
This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence when the object 'dAclIpAccessRuleProtocol' is set to other than ICMP, the object has to be -1.
Identification
{1 3 6 1 4 1 171 14 28 1 3 3 1 19}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: dAclIpAccessListName, dAclIpAccessRuleSn.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.28.1.3.3.1.19
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dAclIpAccessRuleIcmpType OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of ICMP protocol.
If the value is -1, it means the value is not specified.
This object is used for ICMP protocol only, hence when the object
'dAclIpAccessRuleProtocol' is set to other than ICMP, the object has
to be -1."
DEFVAL { -1 }
::= { dAclIpAccessRuleEntry 19 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence when the object 'dAclIpAccessRuleProtocol' is set to other than ICMP, the object has to be -1.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dAclIpAccessRuleIcmpType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dAclIpAccessRuleIcmpType",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence when the object 'dAclIpAccessRuleProtocol' is set to other than ICMP, the object has to be -1.\"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"dAclIpAccessRuleEntry",
"19",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the type of ICMP protocol. If the value is -1, it means the value is not specified. This object is used for ICMP protocol only, hence when the object 'dAclIpAccessRuleProtocol' is set to other than ICMP, the object has to be -1."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Module: DLINKSW-ACL-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Same file in DXS-3400_MIB_R1.00.B040.zip.
Same file in DXS3400_MIB_20181212.zip.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Registration