OID reference
1.3.6.1.4.1.171.14.28.1.3.3.1.18
Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row.
Identification
{1 3 6 1 4 1 171 14 28 1 3 3 1 18}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: dAclIpAccessListName, dAclIpAccessRuleSn.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.28.1.3.3.1.18
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dAclIpAccessRuleQosDscp OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value of DSCP code.
The value of -1 means the value is not specified or not applicable.
Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos
cannot be specified with dAclIpAccessRuleQosDscp at same time
in a row.
"
::= { dAclIpAccessRuleEntry 18 }dAclIpAccessRuleQosDscp OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the value of DSCP code.
The value of -1 means the value is not specified or not applicable.
Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos
cannot be specified with dAclIpAccessRuleQosDscp at same time
in a row.
"
DEFVAL { -1 }
::= { dAclIpAccessRuleEntry 18 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dAclIpAccessRuleQosDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dAclIpAccessRuleQosDscp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"0",
".",
".",
"63",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row. \"",
"::=",
"{",
"dAclIpAccessRuleEntry",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
0,
63
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row."
],
null,
null,
null,
null
]
}Module: DLINKSW-ACL-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Status in source: current.
Names: dAclIpAccessRuleQosDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dAclIpAccessRuleQosDscp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"0",
".",
".",
"63",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row. \"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"dAclIpAccessRuleEntry",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
0,
63
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the value of DSCP code. The value of -1 means the value is not specified or not applicable. Neither dAclIpAccessRuleQosPrecedence nor dAclIpAccessRuleQosTos cannot be specified with dAclIpAccessRuleQosDscp at same time in a row."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Module: DLINKSW-ACL-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Same file in DXS-3400_MIB_R1.00.B040.zip.
Same file in DXS3400_MIB_20181212.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-ACL-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Registration