Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
ipThrottlingConfig OBJECT IDENTIFIER ::= {sysConfig 101}
ipThrottlingConfig OBJECT IDENTIFIER ::= {sysConfig 101}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.1.101.1 | ipThrottlingFeatureStatus | 1 | 1 | CPU card IP throttling feature: off/on |
| 1.3.6.1.4.1.1751.2.18.1.101.2 | ipThrottlingAllowedInFrameRate | 1 | 1 | CPU card IP throttling: allowed input frames per second |
| 1.3.6.1.4.1.1751.2.18.1.101.3 | ipThrottlingLeakyBucketSize | 1 | 1 | CPU card IP throttling: the size of leaky bucket |
| 1.3.6.1.4.1.1751.2.18.1.101.4 | ipThrottlingStatsOdometerTimer | 1 | 1 | CPU card IP throttling: Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.1.101.5 | ipThrottlingStatsOdometerReset | 1 | 1 | CPU card IP throttling: Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.1.101.6 | ipThrottlingInPackets | 1 | 1 | CPU card IP throttling: the total number of input packets from both Ethernet port and In-band-mgmt of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.7 | ipThrottlingInPacketsPassedEi | 1 | 1 | CPU card IP throttling: the number of input packets passed through the Ethernet port of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.8 | ipThrottlingInPacketsDroppedEi | 1 | 1 | CPU card IP throttling: the number of input packets dropped from the Ethernet port of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.9 | ipThrottlingInPacketsPassedIBM | 1 | 1 | CPU card IP throttling: the number of input packets passed from the In-Band-Management of the CPU card. |
| 1.3.6.1.4.1.1751.2.18.1.101.10 | ipThrottlingInPacketsDroppedIBM | 1 | 1 | CPU card IP throttling: the number of input packets dropped from the In-Band-Management of the CPU card. |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.1751.2.18.1.51 | spvcTePointToPointCalls | 1 | 1 | The total number of terminal emulation SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.52 | spvcAtmPointToPointCalls | 1 | 1 | The total number of ATM SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.53 | cgApiCirEmCirEmPvcCalls | 1 | 1 | The total number of circuit emulation to circuit emulation calls for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.54 | cgApiCirEmAtmPvcCalls | 1 | 1 | The total number of circuit emulation to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.55 | cgApiAtmAtmPvcCalls | 1 | 1 | The total number of ATM to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.56 | cgApiPointToPointSvcCalls | 1 | 1 | The total number of point-to-point SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.57 | cgApiPointToMultiPointSvcCalls | 1 | 1 | The total number of point-to-multipoint SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.58 | cgApiPointToMultiPointParties | 1 | 1 | The total number of parties for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.59 | callContrlResAllocApply | 1 | 1 | 0 - not apply, 1 - apply the call control resouce allocation modification |
| 1.3.6.1.4.1.1751.2.18.1.60 | callContrlResAllocUsage | 1 | 1 | The percentage of memory usage for call control resource. |
| 1.3.6.1.4.1.1751.2.18.1.61 | siteFirmwarePatchNumber | 1 | 1 | Constant value representing the patch number of the patch release. |
| 1.3.6.1.4.1.1751.2.18.1.62 | spvcActRestartAll | 1 | 1 | Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections |
| 1.3.6.1.4.1.1751.2.18.1.63 | cgSvcCutThroughOption | 1 | 1 | Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough… |
| 1.3.6.1.4.1.1751.2.18.1.64 | sgApiCirEmEndPoints | 1 | 1 | The total number of circuit emulation endpoints for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.65 | sgApiAtmSvcEndPoints | 1 | 1 | The total number of ATM SVC endpoints for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.66 | siteRemoteMgrSrcAddr1 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.67 | siteRemoteMgrSrcAddr2 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.68 | siteRemoteMgrSrcAddr3 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.69 | siteRemoteMgrSrcAddr4 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.70 | siteRemoteMgrSrcAddr5 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.71 | spvcFrPointToPointCalls | 1 | 1 | The total number of FR SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.72 | inBandAppAtmAddress | 1 | 1 | The ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.73 | inBandAppAtmAddrType | 1 | 1 | The format of the ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.74 | atmArpServer2RemoteAtmAddress | 1 | 1 | The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVC… |
| 1.3.6.1.4.1.1751.2.18.1.75 | atmArpServer2RemoteAddrType | 1 | 1 | The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP s… |
| 1.3.6.1.4.1.1751.2.18.1.76 | tasmMaxAnnceDiskSpace | 1 | 1 | Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk. |
| 1.3.6.1.4.1.1751.2.18.1.77 | tasmMaxAnnce | 1 | 1 | Specifies the maximum number of announcements on the CPU hard disk. |
| 1.3.6.1.4.1.1751.2.18.1.78 | tasmMaxStdTones | 1 | 1 | Specifies the maximum number of standard tones supported by the system. |
| 1.3.6.1.4.1.1751.2.18.1.79 | tasmMemoryAction | 1 | 1 | Specifies the action to be performed on the memory in the TASM card used for storing announcements. |
| 1.3.6.1.4.1.1751.2.18.1.80 | tasAnnceTable | 1 | 6 | Table of announcements for the Tone Announcement server . |
| 1.3.6.1.4.1.1751.2.18.1.81 | tasToneConfigTable | 1 | 9 | Table of standard physical tone attributes |
| 1.3.6.1.4.1.1751.2.18.1.82 | atmArpServerAtmAddr | 1 | 1 | The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server . |
| 1.3.6.1.4.1.1751.2.18.1.83 | atmArpServerAddrType | 1 | 1 | The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server. |
| 1.3.6.1.4.1.1751.2.18.1.84 | spvcPointToMultiPointCalls | 1 | 1 | The total number of SPVC point-to-multipoint calls |
| 1.3.6.1.4.1.1751.2.18.1.85 | spvcPointToMultiPointParties | 1 | 1 | The total number of parties on SPVC point-to-multipoint calls. |
| 1.3.6.1.4.1.1751.2.18.1.86 | consoleIPAddr1 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.87 | consoleIPAddr2 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.88 | consoleIPAddr3 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.89 | consolePort1 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.90 | consolePort2 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.91 | consolePort3 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.92 | featureTable | 1 | 5 | Table of features to be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.93 | mediaGatewayControlType | 1 | 1 | Choose to use H.248 protocol or sapphire protocol |
| 1.3.6.1.4.1.1751.2.18.1.94 | dspResourceTable | 1 | 6 | Table of DSP resource usage for the whole system. |
| 1.3.6.1.4.1.1751.2.18.1.95 | tasmMaxDigitControlBlocks | 1 | 1 | Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control … |
| 1.3.6.1.4.1.1751.2.18.1.96 | tasmMaxTestControlBlocks | 1 | 1 | Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control bl… |
| 1.3.6.1.4.1.1751.2.18.1.97 | tasmMaxMemResvd | 1 | 1 | Specifies the maximum amount of memory in megabytes reserved for TASM. |
| 1.3.6.1.4.1.1751.2.18.1.98 | tasmControlBlockResAllocUsage | 1 | 1 | The percentage of memory usage for tones, announcements, digit collection and line tests control blocks. |
| 1.3.6.1.4.1.1751.2.18.1.99 | tasmAnnceCacheMemResAllocUsage | 1 | 1 | The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be up… |
| 1.3.6.1.4.1.1751.2.18.1.100 | siteAlternateGatewayAddr | 1 | 1 | Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabl… |
| 1.3.6.1.4.1.1751.2.18.1.102 | csSapphireInterfaceAddress | 1 | 1 | The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server … |
| 1.3.6.1.4.1.1751.2.18.1.103 | trapActivationTable | 1 | 6 | Table of traps be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.104 | spvcGlobalPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.105 | spvcPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported in SPVCs. |
| 1.3.6.1.4.1.1751.2.18.1.106 | spvcTrunkingPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported in SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.107 | atmTrunkVccs | 1 | 1 | The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs). |
| 1.3.6.1.4.1.1751.2.18.1.108 | atmTrunkNarrowBandCalls | 1 | 1 | The total number of ATM Trunking Narrow Band Calls supported |
| 1.3.6.1.4.1.1751.2.18.1.109 | dspResourceFeatureConfig | 1 | 2 | None |
| ... | ||||