Specifies the maximum number of
announcements on the CPU hard disk.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Specifies the maximum number of tones and
announcements that can be played simultaneously.
This will depend on the number of control blocks
allocated for collecting digits and for line
tests as the memory comes from the same pool.
The tasmControlBlockResAllocUsage field will be
updated to indicate this.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
tasmMaxAnnce OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of announcements on the CPU hard disk." DEFVAL { 100 } ::= { sysConfig 77 }
tasmMaxAnnce OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of tones and announcements that can be played simultaneously. This will depend on the number of control blocks allocated for collecting digits and for line tests as the memory comes from the same pool. The tasmControlBlockResAllocUsage field will be updated to indicate this." DEFVAL { 1 } ::= { sysConfig 77 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.1.77.0 | tasmMaxAnnce | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.1751.2.18.1.27 | inBandPrimaryIpAddress | 1 | 1 | IP address of the switch when the switch is accessed over the primary in-band connection. |
| 1.3.6.1.4.1.1751.2.18.1.28 | inBandPrimaryIpMask | 1 | 1 | IP address subnet mask of the primary in-band management IP address. |
| 1.3.6.1.4.1.1751.2.18.1.29 | inBandBackupIpAddress | 1 | 1 | IP address of the switch when the switch is accessed over the secondary in-band connection. |
| 1.3.6.1.4.1.1751.2.18.1.30 | inBandBackupIpMask | 1 | 1 | IP address subnet mask of the secondary in-band management IP address. |
| 1.3.6.1.4.1.1751.2.18.1.31 | inBandSvcConnectionsAllowed | 1 | 1 | Flag indicating whether in-band management should be supported over SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.32 | atmArpServer | 1 | 1 | This flag indicates if this switch is an ATM ARP server. |
| 1.3.6.1.4.1.1751.2.18.1.33 | atmArpServerRemoteConnectionType | 1 | 1 | When this switch is not the ATM ARP server, indicates whether the connection to the ATM ARP server uses SVCs or PVCs. |
| 1.3.6.1.4.1.1751.2.18.1.34 | atmArpServerRemoteAtmAddress | 1 | 1 | The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SV… |
| 1.3.6.1.4.1.1751.2.18.1.35 | atmArpServerRemoteAddrType | 1 | 1 | The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP … |
| 1.3.6.1.4.1.1751.2.18.1.36 | atmArpServerRemoteIpAddress | 1 | 1 | The IP address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses PVC… |
| 1.3.6.1.4.1.1751.2.18.1.37 | atmArpServerRemoteIpMask | 1 | 1 | The IP address subnet mask of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP ser… |
| 1.3.6.1.4.1.1751.2.18.1.38 | atmArpServerEncapsulation | 1 | 1 | The type of encapsulation used for IP packets over ATM in in-band management. |
| 1.3.6.1.4.1.1751.2.18.1.41 | siteFallbackSoftwareVersion | 1 | 1 | Constant value representing the version number of the software to fallback to. |
| 1.3.6.1.4.1.1751.2.18.1.42 | siteUpgradeSoftwareVersion | 1 | 1 | Constant value representing the version number of the software to upgrade to. |
| 1.3.6.1.4.1.1751.2.18.1.43 | siteSwitchIpAddr | 1 | 1 | IP Address for communication with the switch, regardless of which cpu is primary. |
| 1.3.6.1.4.1.1751.2.18.1.44 | muxTcpType | 1 | 1 | The type of mux TCP. |
| 1.3.6.1.4.1.1751.2.18.1.45 | loopbackLocationID | 1 | 1 | ID of the ATM Node where the loopback is to occur. |
| 1.3.6.1.4.1.1751.2.18.1.46 | oamDebouncingPeriod | 1 | 1 | Debouncing period in milli seconds for clearing AIS/RDI state. |
| 1.3.6.1.4.1.1751.2.18.1.47 | svcPointToPointCalls | 1 | 1 | The total number of SVC point-to-point calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.48 | svcPointToMultiPointCalls | 1 | 1 | The total number of SVC point-to-multipoint calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.49 | svcPointToMultiPointParties | 1 | 1 | The total number of parties on SVC point-to-multipoint calls, both legs are SVCs. |
| 1.3.6.1.4.1.1751.2.18.1.50 | spvcCePointToPointCalls | 1 | 1 | The total number of circuit emulation SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.51 | spvcTePointToPointCalls | 1 | 1 | The total number of terminal emulation SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.52 | spvcAtmPointToPointCalls | 1 | 1 | The total number of ATM SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.53 | cgApiCirEmCirEmPvcCalls | 1 | 1 | The total number of circuit emulation to circuit emulation calls for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.54 | cgApiCirEmAtmPvcCalls | 1 | 1 | The total number of circuit emulation to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.55 | cgApiAtmAtmPvcCalls | 1 | 1 | The total number of ATM to ATM calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.56 | cgApiPointToPointSvcCalls | 1 | 1 | The total number of point-to-point SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.57 | cgApiPointToMultiPointSvcCalls | 1 | 1 | The total number of point-to-multipoint SVC calls for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.58 | cgApiPointToMultiPointParties | 1 | 1 | The total number of parties for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.59 | callContrlResAllocApply | 1 | 1 | 0 - not apply, 1 - apply the call control resouce allocation modification |
| 1.3.6.1.4.1.1751.2.18.1.60 | callContrlResAllocUsage | 1 | 1 | The percentage of memory usage for call control resource. |
| 1.3.6.1.4.1.1751.2.18.1.61 | siteFirmwarePatchNumber | 1 | 1 | Constant value representing the patch number of the patch release. |
| 1.3.6.1.4.1.1751.2.18.1.62 | spvcActRestartAll | 1 | 1 | Restart all ATM-to-ATM,CE-to-CE,TE-to-TE,FR-to-FR active unconnected spvc connections |
| 1.3.6.1.4.1.1751.2.18.1.63 | cgSvcCutThroughOption | 1 | 1 | Cut Through option for SVC calls going to CG cgSvcAcImplicitCutThrough (1) - AC implicitly cuts through. cgSvcCgExplicitCutThrough… |
| 1.3.6.1.4.1.1751.2.18.1.64 | sgApiCirEmEndPoints | 1 | 1 | The total number of circuit emulation endpoints for Sapphire API. |
| 1.3.6.1.4.1.1751.2.18.1.65 | sgApiAtmSvcEndPoints | 1 | 1 | The total number of ATM SVC endpoints for Sapphire APIs |
| 1.3.6.1.4.1.1751.2.18.1.66 | siteRemoteMgrSrcAddr1 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.67 | siteRemoteMgrSrcAddr2 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.68 | siteRemoteMgrSrcAddr3 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.69 | siteRemoteMgrSrcAddr4 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.70 | siteRemoteMgrSrcAddr5 | 1 | 1 | This is the source IP address used in all traps sent to remote manager |
| 1.3.6.1.4.1.1751.2.18.1.71 | spvcFrPointToPointCalls | 1 | 1 | The total number of FR SPVC calls. |
| 1.3.6.1.4.1.1751.2.18.1.72 | inBandAppAtmAddress | 1 | 1 | The ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.73 | inBandAppAtmAddrType | 1 | 1 | The format of the ATM address of the inBand application |
| 1.3.6.1.4.1.1751.2.18.1.74 | atmArpServer2RemoteAtmAddress | 1 | 1 | The ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP server uses SVC… |
| 1.3.6.1.4.1.1751.2.18.1.75 | atmArpServer2RemoteAddrType | 1 | 1 | The format of the ATM address of the ATM ARP server when this switch is not the ATM ARP server and the connection to the ATM ARP s… |
| 1.3.6.1.4.1.1751.2.18.1.76 | tasmMaxAnnceDiskSpace | 1 | 1 | Specifies the maximum disk size in MBytes reserved for compressed announcements on the CPU hard disk. |
| 1.3.6.1.4.1.1751.2.18.1.78 | tasmMaxStdTones | 1 | 1 | Specifies the maximum number of standard tones supported by the system. |
| 1.3.6.1.4.1.1751.2.18.1.79 | tasmMemoryAction | 1 | 1 | Specifies the action to be performed on the memory in the TASM card used for storing announcements. |
| 1.3.6.1.4.1.1751.2.18.1.80 | tasAnnceTable | 1 | 6 | Table of announcements for the Tone Announcement server . |
| 1.3.6.1.4.1.1751.2.18.1.81 | tasToneConfigTable | 1 | 9 | Table of standard physical tone attributes |
| 1.3.6.1.4.1.1751.2.18.1.82 | atmArpServerAtmAddr | 1 | 1 | The ATM address of the ATM ARP server when this switch is configured as the ATM ARP server . |
| 1.3.6.1.4.1.1751.2.18.1.83 | atmArpServerAddrType | 1 | 1 | The format of the ATM address of the ATM ARP server when this switch is configured as the ATM ARP server. |
| 1.3.6.1.4.1.1751.2.18.1.84 | spvcPointToMultiPointCalls | 1 | 1 | The total number of SPVC point-to-multipoint calls |
| 1.3.6.1.4.1.1751.2.18.1.85 | spvcPointToMultiPointParties | 1 | 1 | The total number of parties on SPVC point-to-multipoint calls. |
| 1.3.6.1.4.1.1751.2.18.1.86 | consoleIPAddr1 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.87 | consoleIPAddr2 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.88 | consoleIPAddr3 | 1 | 1 | console IP Address, where TRAP will be sent. |
| 1.3.6.1.4.1.1751.2.18.1.89 | consolePort1 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.90 | consolePort2 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.91 | consolePort3 | 1 | 1 | port number on host where TRAP will be sent |
| 1.3.6.1.4.1.1751.2.18.1.92 | featureTable | 1 | 5 | Table of features to be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.93 | mediaGatewayControlType | 1 | 1 | Choose to use H.248 protocol or sapphire protocol |
| 1.3.6.1.4.1.1751.2.18.1.94 | dspResourceTable | 1 | 6 | Table of DSP resource usage for the whole system. |
| 1.3.6.1.4.1.1751.2.18.1.95 | tasmMaxDigitControlBlocks | 1 | 1 | Specifies the maximum number of digit collection that can be initiated simultaneously. This will depend on the number of control … |
| 1.3.6.1.4.1.1751.2.18.1.96 | tasmMaxTestControlBlocks | 1 | 1 | Specifies the maximum number of TDM line tests that can be initiated simultaneously. This will depend on the number of control bl… |
| 1.3.6.1.4.1.1751.2.18.1.97 | tasmMaxMemResvd | 1 | 1 | Specifies the maximum amount of memory in megabytes reserved for TASM. |
| 1.3.6.1.4.1.1751.2.18.1.98 | tasmControlBlockResAllocUsage | 1 | 1 | The percentage of memory usage for tones, announcements, digit collection and line tests control blocks. |
| 1.3.6.1.4.1.1751.2.18.1.99 | tasmAnnceCacheMemResAllocUsage | 1 | 1 | The percentage of memory usage for caching announcements in memory. Everytime an announcement is compressed this field will be up… |
| 1.3.6.1.4.1.1751.2.18.1.100 | siteAlternateGatewayAddr | 1 | 1 | Alternate ip address of gateway to access the site (switch),Can be used only over the InBand PVC connection when the OAM is enabl… |
| 1.3.6.1.4.1.1751.2.18.1.101 | ipThrottlingConfig | 10 | 20 | None |
| 1.3.6.1.4.1.1751.2.18.1.102 | csSapphireInterfaceAddress | 1 | 1 | The IP address to be specified as the source address in the TCP connect message that is sent to the SoftSwitch running as server … |
| 1.3.6.1.4.1.1751.2.18.1.103 | trapActivationTable | 1 | 6 | Table of traps be turned on/off |
| 1.3.6.1.4.1.1751.2.18.1.104 | spvcGlobalPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported across SPVCs and SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.105 | spvcPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported in SPVCs. |
| 1.3.6.1.4.1.1751.2.18.1.106 | spvcTrunkingPriorityScheme | 1 | 1 | Flag indicating whether priority scheme should be supported in SPVC-trunks. |
| 1.3.6.1.4.1.1751.2.18.1.107 | atmTrunkVccs | 1 | 1 | The total number of ATM Trunk VCCs (including SigVccs and Bearer Vccs). |
| 1.3.6.1.4.1.1751.2.18.1.108 | atmTrunkNarrowBandCalls | 1 | 1 | The total number of ATM Trunking Narrow Band Calls supported |
| 1.3.6.1.4.1.1751.2.18.1.109 | dspResourceFeatureConfig | 1 | 2 | None |
| ... | ||||