Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
sysInfo OBJECT IDENTIFIER ::= { acMIB 19 }
sysInfo OBJECT IDENTIFIER ::= { acMIB 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.19.1 | sysInfoTxOneCellTotal | 1 | 1 | Total amount of cells within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.2 | sysInfoTxOneCellUsed | 1 | 1 | Amount of cells currently being used within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.3 | sysInfoTxOneCellHigh | 1 | 1 | High-water mark of cells used within the transmit one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.4 | sysInfoRxOneCellTotal | 1 | 1 | Total amount of cells within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.5 | sysInfoRxOneCellUsed | 1 | 1 | Amount of cells currently being used within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.6 | sysInfoRxOneCellHigh | 1 | 1 | High-water mark of cells used within the receive one cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.7 | sysInfoRxMultiCellTotal | 1 | 1 | Total amount of multi-cells within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.8 | sysInfoRxMultiCellUsed | 1 | 1 | Amount of multi-cells currently being used within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.9 | sysInfoRxMultiCellHigh | 1 | 1 | High-water mark of multi-cells used within the receive multi-cell pool. |
| 1.3.6.1.4.1.1751.2.18.19.10 | sysInfoMsgPoolTotal | 1 | 1 | Total amount of messages within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.11 | sysInfoMsgPoolUsed | 1 | 1 | Amount of messages currently being used within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.12 | sysInfoMsgPoolHigh | 1 | 1 | High-water mark of messages used within the message pool. |
| 1.3.6.1.4.1.1751.2.18.19.13 | sysInfoDiscFreeKBytes | 1 | 1 | Amount of disc free space available in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.14 | sysInfoCpuUtilization1 | 1 | 1 | xx.yy% - cpuUtilization1 is the xx part of it. |
| 1.3.6.1.4.1.1751.2.18.19.15 | sysInfoCpuUtilization2 | 1 | 1 | xx.yy% - cpuUtilization2 is the yy part of it. |
| 1.3.6.1.4.1.1751.2.18.19.16 | sysInfoSysUptime | 1 | 1 | Amount of time cpu has been up in seconds. |
| 1.3.6.1.4.1.1751.2.18.19.17 | sysInfoBadCellRx | 1 | 1 | The number of bad cells (BIP16) received so far. |
| 1.3.6.1.4.1.1751.2.18.19.18 | sysInfoMisaligned | 1 | 1 | The number of misaligned cells received so far. |
| 1.3.6.1.4.1.1751.2.18.19.19 | sysInfoClockAErr | 1 | 1 | Value is 1, TRUE, if the clock on backplane A is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.20 | sysInfoClockBErr | 1 | 1 | Value is 1, TRUE, if the clock on backplane B is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.21 | sysInfoBIPAErr | 1 | 1 | Value is 1, TRUE, if the cell circuit on backplane A is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.22 | sysInfoBIPBErr | 1 | 1 | Value is 1, TRUE, if the cell circuit on backplane B is errored, otherwise, the value is 0, FALSE. |
| 1.3.6.1.4.1.1751.2.18.19.23 | sysInfoDiscTotalKBytes | 1 | 1 | Amount of disc space available in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.24 | sysInfoRAMFreeKBytes | 1 | 1 | Amount of RAM memory available for use in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.25 | sysInfoRAMTotalKBytes | 1 | 1 | Amount of RAM memory available on cpu card in KB's. |
| 1.3.6.1.4.1.1751.2.18.19.26 | msgPoolViewTable | 1 | 5 | Table of Msg Pools In the System, Used only for diagnostic purposes |
| 1.3.6.1.4.1.1751.2.18.19.27 | primaryCpuHwType | 1 | 1 | Indicates the hardware version type of the primary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200MH… |
| 1.3.6.1.4.1.1751.2.18.19.28 | secondaryCpuHwType | 1 | 1 | Indicates the hardware version type of the secondary CPU. version1: 150MHz Saturn13 board supporting 8MB-64MB Memory. version2: 200… |
| 1.3.6.1.4.1.1751.2.18.19.29 | sysInfoDiskCheck | 1 | 1 | Indicates the checking status of the disk in CPU card. |
| 1.3.6.1.4.1.1751.2.18.19.30 | switchAlarmStatus | 1 | 1 | Current status of the alarm on the switch. notAvailable - The alarm status could not be retreived. none - No alarm is present. min… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.1 | sysConfig | 107 | 261 | None |
| 1.3.6.1.4.1.1751.2.18.2 | equipConfig | 19 | 193 | None |
| 1.3.6.1.4.1.1751.2.18.3 | channelConfig | 15 | 132 | None |
| 1.3.6.1.4.1.1751.2.18.5 | intfConfig | 22 | 444 | None |
| 1.3.6.1.4.1.1751.2.18.6 | connectionConfig | 39 | 894 | None |
| 1.3.6.1.4.1.1751.2.18.7 | userServiceConfig | 0 | 0 | None |
| 1.3.6.1.4.1.1751.2.18.8 | sysTraps | 4 | 288 | None |
| 1.3.6.1.4.1.1751.2.18.9 | sysStatistics | 0 | 0 | None |
| 1.3.6.1.4.1.1751.2.18.10 | equipStatistics | 9 | 97 | None |
| 1.3.6.1.4.1.1751.2.18.11 | intfStatistics | 12 | 149 | None |
| 1.3.6.1.4.1.1751.2.18.12 | connectionStatistics | 17 | 502 | None |
| 1.3.6.1.4.1.1751.2.18.13 | ipAtmGroup | 5 | 20 | None |
| 1.3.6.1.4.1.1751.2.18.14 | iispRouting | 4 | 30 | None |
| 1.3.6.1.4.1.1751.2.18.15 | returnCode | 61 | 122 | None |
| 1.3.6.1.4.1.1751.2.18.16 | sysControl | 32 | 84 | None |
| 1.3.6.1.4.1.1751.2.18.17 | stratumConfig | 12 | 24 | None |
| 1.3.6.1.4.1.1751.2.18.18 | cellTest | 14 | 28 | None |
| 1.3.6.1.4.1.1751.2.18.20 | ethernetConfig | 3 | 22 | None |
| 1.3.6.1.4.1.1751.2.18.21 | alarmConfig | 4 | 8 | None |
| 1.3.6.1.4.1.1751.2.18.22 | sysTest | 3 | 61 | None |
| 1.3.6.1.4.1.1751.2.18.23 | fwDriverSup | 2 | 19 | None |
| 1.3.6.1.4.1.1751.2.18.24 | viprConfig | 8 | 122 | None |
| 1.3.6.1.4.1.1751.2.18.25 | toneAnnceControl | 25 | 50 | None |
| 1.3.6.1.4.1.1751.2.18.26 | gr303Config | 1 | 39 | None |
| 1.3.6.1.4.1.1751.2.18.27 | gr303Stats | 1 | 11 | None |
| 1.3.6.1.4.1.1751.2.18.28 | atmTrunkingMIBObjects | 5 | 101 | None |
| 1.3.6.1.4.1.1751.2.18.29 | protectionGroup | 2 | 18 | None |
| 1.3.6.1.4.1.1751.2.18.30 | h248Config | 1 | 12 | None |
| 1.3.6.1.4.1.1751.2.18.31 | h248SysControl | 8 | 16 | None |