Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
stratumConfig OBJECT IDENTIFIER ::= { acMIB 17 }
stratumConfig OBJECT IDENTIFIER ::= { acMIB 17 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1751.2.18.17.1 | stratumSyncSource | 1 | 1 | Clock source for the stratum card - lineTiming: must have slot and port specified in stratumPrimaryLineId. compositeClock: local c… |
1.3.6.1.4.1.1751.2.18.17.2 | stratumPrimaryLineId | 1 | 1 | Format SSPP (slot and port #'s) to be used when lineTiming is specified in stratumSyncSource. |
1.3.6.1.4.1.1751.2.18.17.3 | stratumSecondaryLineId | 1 | 1 | Format SSPP (slot and port #'s) to be used if the primary line has failed. Zeros imply that the stratum should switch to holdover… |
1.3.6.1.4.1.1751.2.18.17.4 | stratumLevel | 1 | 1 | Enable or disable the switching over to stratum 4 when stratum 3 is not possible. |
1.3.6.1.4.1.1751.2.18.17.5 | stratumLineCommand | 1 | 1 | Forces the stratum card to use one of the two specified lines as its clock source when the stratumSyncSource is lineTiming. |
1.3.6.1.4.1.1751.2.18.17.6 | stratumLineTimingStatus | 1 | 1 | Represents the source of the current clock. |
1.3.6.1.4.1.1751.2.18.17.7 | stratumMode | 1 | 1 | Current status of the primary stratum card. |
1.3.6.1.4.1.1751.2.18.17.8 | stratumBackupMode | 1 | 1 | Current status of the backup stratum card. |
1.3.6.1.4.1.1751.2.18.17.9 | stratumRefFailAction | 1 | 1 | Defines whether the stratum should switch to freerun or holdover on reference clock failure. |
1.3.6.1.4.1.1751.2.18.17.10 | stratumPortStatus | 1 | 1 | Current status of the primary stratum card. portFOS indicates port frequency offset. |
1.3.6.1.4.1.1751.2.18.17.11 | stratumBkupPortStatus | 1 | 1 | Current status of the backup stratum card. portFOS indicates port frequency offset. |
1.3.6.1.4.1.1751.2.18.17.12 | activeStratum | 1 | 1 | Current status of the backup stratum card. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1751.2.18.1 | sysConfig | 107 | 261 | None |
1.3.6.1.4.1.1751.2.18.2 | equipConfig | 19 | 193 | None |
1.3.6.1.4.1.1751.2.18.3 | channelConfig | 15 | 132 | None |
1.3.6.1.4.1.1751.2.18.5 | intfConfig | 22 | 444 | None |
1.3.6.1.4.1.1751.2.18.6 | connectionConfig | 39 | 894 | None |
1.3.6.1.4.1.1751.2.18.7 | userServiceConfig | 0 | 0 | None |
1.3.6.1.4.1.1751.2.18.8 | sysTraps | 4 | 288 | None |
1.3.6.1.4.1.1751.2.18.9 | sysStatistics | 0 | 0 | None |
1.3.6.1.4.1.1751.2.18.10 | equipStatistics | 9 | 97 | None |
1.3.6.1.4.1.1751.2.18.11 | intfStatistics | 12 | 149 | None |
1.3.6.1.4.1.1751.2.18.12 | connectionStatistics | 17 | 502 | None |
1.3.6.1.4.1.1751.2.18.13 | ipAtmGroup | 5 | 20 | None |
1.3.6.1.4.1.1751.2.18.14 | iispRouting | 4 | 30 | None |
1.3.6.1.4.1.1751.2.18.15 | returnCode | 61 | 122 | None |
1.3.6.1.4.1.1751.2.18.16 | sysControl | 32 | 84 | None |
1.3.6.1.4.1.1751.2.18.18 | cellTest | 14 | 28 | None |
1.3.6.1.4.1.1751.2.18.19 | sysInfo | 30 | 64 | None |
1.3.6.1.4.1.1751.2.18.20 | ethernetConfig | 3 | 22 | None |
1.3.6.1.4.1.1751.2.18.21 | alarmConfig | 4 | 8 | None |
1.3.6.1.4.1.1751.2.18.22 | sysTest | 3 | 61 | None |
1.3.6.1.4.1.1751.2.18.23 | fwDriverSup | 2 | 19 | None |
1.3.6.1.4.1.1751.2.18.24 | viprConfig | 8 | 122 | None |
1.3.6.1.4.1.1751.2.18.25 | toneAnnceControl | 25 | 50 | None |
1.3.6.1.4.1.1751.2.18.26 | gr303Config | 1 | 39 | None |
1.3.6.1.4.1.1751.2.18.27 | gr303Stats | 1 | 11 | None |
1.3.6.1.4.1.1751.2.18.28 | atmTrunkingMIBObjects | 5 | 101 | None |
1.3.6.1.4.1.1751.2.18.29 | protectionGroup | 2 | 18 | None |
1.3.6.1.4.1.1751.2.18.30 | h248Config | 1 | 12 | None |
1.3.6.1.4.1.1751.2.18.31 | h248SysControl | 8 | 16 | None |