This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
The e1LineStatus is a bit map represented
as a sum, therefore, it can represent multiple
failures (alarms) and a LoopbackState
simultaneously.
e1NoAlarm should be set if and only if no other
flag is set.
If the e1LoopbackState bit is set, the loopback
in effect can be determined from the
e1LoopbackConfig object.
The various bit positions are:
1: e1NoAlarm: No Alarm Present
2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow
Alarm)
4: e1XmtFarEndLOF: Near end sending LOF Indication
8: e1RcvAIS: Far end sending AIS
16: e1XmtAIS: Near end sending AIS
32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm)
64: e1LossOfSignal: Near end Loss Of Signal
128: e1LoopbackState: Near end is looped
256: e1T16AIS: E1 TS16 AIS
512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF
1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF
2048: e1RcvTestCode: Near End detects a test code
4096: e1OtherFailure: any line status not defined
here
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
The e1LineStatus is a bit map represented
as a sum, therefore, it can represent multiple
failures (alarms) and a LoopbackState
simultaneously.
e1NoAlarm should be set if and only if no other
flag is set.
If the e1LoopbackState bit is set, the loopback
in effect can be determined from the
e1LoopbackConfig object.
The various bit positions are:
1: e1NoAlarm: No Alarm Present
2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow
Alarm)
4: e1XmtFarEndLOF: Near end sending LOF Indication
8: e1RcvAIS: Far end sending AIS
16: e1XmtAIS: Near end sending AIS
32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm)
64: e1LossOfSignal: Near end Loss Of Signal
128: e1LoopbackState: Near end is looped
256: e1T16AIS: E1 TS16 AIS
512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF
1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF
2048: e1RcvTestCode: Near End detects a test code
4096: e1OtherFailure: any line status not defined
here
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
e1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. e1NoAlarm should be set if and only if no other flag is set. If the e1LoopbackState bit is set, the loopback in effect can be determined from the e1LoopbackConfig object. The various bit positions are: 1: e1NoAlarm: No Alarm Present 2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: e1XmtFarEndLOF: Near end sending LOF Indication 8: e1RcvAIS: Far end sending AIS 16: e1XmtAIS: Near end sending AIS 32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: e1LossOfSignal: Near end Loss Of Signal 128: e1LoopbackState: Near end is looped 256: e1T16AIS: E1 TS16 AIS 512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: e1RcvTestCode: Near End detects a test code 4096: e1OtherFailure: any line status not defined here" DEFVAL { 1 } ::= { e1PortConfigEntry 8 }
e1LineStatus OBJECT-TYPE SYNTAX INTEGER (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The e1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. e1NoAlarm should be set if and only if no other flag is set. If the e1LoopbackState bit is set, the loopback in effect can be determined from the e1LoopbackConfig object. The various bit positions are: 1: e1NoAlarm: No Alarm Present 2: e1RcvFarEndLOF: Far end LOF (a.k.a., Yellow Alarm) 4: e1XmtFarEndLOF: Near end sending LOF Indication 8: e1RcvAIS: Far end sending AIS 16: e1XmtAIS: Near end sending AIS 32: e1LossOfFrame: Near end LOF (a.k.a., Red Alarm) 64: e1LossOfSignal: Near end Loss Of Signal 128: e1LoopbackState: Near end is looped 256: e1T16AIS: E1 TS16 AIS 512: e1RcvFarEndLOMF: Far End Sending TS16 LOMF 1024: e1XmtFarEndLOMF: Near End Sending TS16 LOMF 2048: e1RcvTestCode: Near End detects a test code 4096: e1OtherFailure: any line status not defined here" DEFVAL { 1 } ::= { e1PortConfigEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.2.12.1.1 | e1PortId | 0 | 0 | interface index - slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.12.1.2 | e1Channelization | 0 | 0 | e1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.12.1.3 | e1LineType | 0 | 0 | E1 interface type. The rate of E1 is 2.048 Mbps |
| 1.3.6.1.4.1.1751.2.18.2.12.1.4 | e1LineCoding | 0 | 0 | e1 interface type |
| 1.3.6.1.4.1.1751.2.18.2.12.1.5 | e1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the e1 interface See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.12.1.6 | e1TransmitClockSource | 0 | 0 | e1 timing source |
| 1.3.6.1.4.1.1751.2.18.2.12.1.7 | e1LineNationalBits | 0 | 0 | e1 line country specific code |
| 1.3.6.1.4.1.1751.2.18.2.12.1.10 | e1TS16 | 0 | 0 | Time slot 16 is configurable for channel associated signaling (CAS) or data. cas: 'ABCD' signaling will be extracted in time slot … |
| 1.3.6.1.4.1.1751.2.18.2.12.1.11 | e1DataTransferType | 0 | 0 | E1 data transfer type is only applicable in Circuit Emulation where unstructured CE packets entire T1 frame including the F-bit i… |
| 1.3.6.1.4.1.1751.2.18.2.12.1.12 | e1CRC4 | 0 | 0 | Enable or disable transmission of CRC4 bits on bit 1 of each frame. |
| 1.3.6.1.4.1.1751.2.18.2.12.1.13 | e1OamInterworkingType | 0 | 0 | Specifies whether the interworking is done by trunk conditioning or unframed1s |
| 1.3.6.1.4.1.1751.2.18.2.12.1.14 | e1EnhanceFeatureSet1 | 0 | 0 | To enable/disable a proprietary ab signaling scheme, it applies to all DS0s in the port. No individual DS0 signaling can be config… |
| 1.3.6.1.4.1.1751.2.18.2.12.1.15 | e1ConnGatewayFeature | 0 | 0 | To enable/disable connection gateway (Sapphire) API. |