Maximum burst size, in cells,
this will reflect the frame relay parameters in
atm terms.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Maximum burst size, in cells,
this will reflect the frame relay parameters in
atm terms.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
viprSubChnlAtmMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 22 }
viprSubChnlAtmMaxBurstSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms." DEFVAL { 1 } ::= { viprSubChnlConfigEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.24.3.1.1 | viprSubChnlId | 0 | 0 | A unique Id for the sub channel in the interface |
| 1.3.6.1.4.1.1751.2.18.24.3.1.2 | viprSubChnlIntfIndex | 0 | 0 | The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the T… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.3 | viprSubChnlTrafficType | 0 | 0 | The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex |
| 1.3.6.1.4.1.1751.2.18.24.3.1.4 | viprSubChnlLlcEncapType | 0 | 0 | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.5 | viprSubChnlMacEncapType | 0 | 0 | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.6 | viprSubChnlTosFeature | 0 | 0 | Allow the user to set the TOS values or not |
| 1.3.6.1.4.1.1751.2.18.24.3.1.7 | viprSubChnlTosValue | 0 | 0 | The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP p… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.8 | viprSubChnlTosMask | 0 | 0 | The Type of Service mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.9 | viprSubChnlVpiDlci | 0 | 0 | The VPI/DLCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.10 | viprSubChnlVci | 0 | 0 | The VCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.11 | viprSubChnlSarType | 0 | 0 | The SAR Type supported for the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.12 | viprSubChnlServiceType | 0 | 0 | The Service types that are supported |
| 1.3.6.1.4.1.1751.2.18.24.3.1.13 | viprSubChnlFwdErrCorrection | 0 | 0 | The Forward error correction to be used |
| 1.3.6.1.4.1.1751.2.18.24.3.1.14 | viprSubChnlInterworkingType | 0 | 0 | The Encapsulation type used for Frame relay subchannels |
| 1.3.6.1.4.1.1751.2.18.24.3.1.15 | viprSubChnlFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.16 | viprSubChnlComBurstSize | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direct… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.17 | viprSubChnlExcessBurstSize | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress directio… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.18 | viprSubChnlCommitedInfoRate | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in … |
| 1.3.6.1.4.1.1751.2.18.24.3.1.19 | viprSubChnlTimeInterval | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.20 | viprSubChnlAtmPeakCellRate | 0 | 0 | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.21 | viprSubChnlAtmSustainedCellRate | 0 | 0 | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.23 | viprSubChnlFrPeakCellRate | 0 | 0 | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.24 | viprSubChnlFrSustainedCellRate | 0 | 0 | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.25 | viprSubChnlFrMaxBurstSize | 0 | 0 | Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.26 | viprSubChnlFlowType | 0 | 0 | The type of flow |
| 1.3.6.1.4.1.1751.2.18.24.3.1.27 | viprSubChnlAdminStatus | 0 | 0 | This variable represents the various X.731 states the Sub Channel state machine can take Administartively |
| 1.3.6.1.4.1.1751.2.18.24.3.1.28 | viprSubChnlOperStatus | 0 | 0 | This variable represents the various X.731 states the Sub Channel state machine can take Operationally |
| 1.3.6.1.4.1.1751.2.18.24.3.1.29 | viprSubChnlInitTmr | 0 | 0 | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.30 | viprSubChnlDisabWarnTmr | 0 | 0 | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable stat… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.31 | viprSubChnlShutDwnWarnTmr | 0 | 0 | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.32 | viprSubChnlDisableWarning | 0 | 0 | This variable when disabled will mask all the Disable warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.33 | viprSubChnlDisableReason | 0 | 0 | This variable describes the reason why the SubChnl in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.34 | viprSubChnlRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.24.3.1.35 | viprSubChnlImIpAddr | 0 | 0 | inband management IpAddr |
| 1.3.6.1.4.1.1751.2.18.24.3.1.36 | viprSubChnlImMask | 0 | 0 | inband management Mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.37 | viprSubChnlViB | 0 | 0 | The viB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.38 | viprSubChnlVUNIB | 0 | 0 | The VUNIB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.39 | viprSubChnlTrafficShaping | 0 | 0 | Traffic Shaping Support in the A2B direction for outgoing ATM connections. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.40 | viprSubChnlAtmOamStatus | 0 | 0 | Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end poi… |