The type of service specified in IP packet masked
with viprSubChnlTosMask has to be equal to this
value in order to have the IP packets getting
forwarded in this sub channel
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
The type of service specified in IP packet masked
with viprSubChnlTosMask has to be equal to this
value in order to have the IP packets getting
forwarded in this sub channel
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
viprSubChnlTosValue OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in this sub channel" DEFVAL { 255 } ::= { viprSubChnlConfigEntry 7 }
viprSubChnlTosValue OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service specified in IP packet masked with viprSubChnlTosMask has to be equal to this value in order to have the IP packets getting forwarded in this sub channel" DEFVAL { 255 } ::= { viprSubChnlConfigEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.24.3.1.1 | viprSubChnlId | 0 | 0 | A unique Id for the sub channel in the interface |
| 1.3.6.1.4.1.1751.2.18.24.3.1.2 | viprSubChnlIntfIndex | 0 | 0 | The Slot Port Channel to which the IP Packet to be forwarded when the TOS specified in the incoming IP packet is matched to the T… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.3 | viprSubChnlTrafficType | 0 | 0 | The type of interface configured on the SSPPCCC, viprSubChnlIntfIndex |
| 1.3.6.1.4.1.1751.2.18.24.3.1.4 | viprSubChnlLlcEncapType | 0 | 0 | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.5 | viprSubChnlMacEncapType | 0 | 0 | The encapsulation technique used in making IP packet to ATM cell |
| 1.3.6.1.4.1.1751.2.18.24.3.1.6 | viprSubChnlTosFeature | 0 | 0 | Allow the user to set the TOS values or not |
| 1.3.6.1.4.1.1751.2.18.24.3.1.8 | viprSubChnlTosMask | 0 | 0 | The Type of Service mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.9 | viprSubChnlVpiDlci | 0 | 0 | The VPI/DLCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.10 | viprSubChnlVci | 0 | 0 | The VCI value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.11 | viprSubChnlSarType | 0 | 0 | The SAR Type supported for the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.12 | viprSubChnlServiceType | 0 | 0 | The Service types that are supported |
| 1.3.6.1.4.1.1751.2.18.24.3.1.13 | viprSubChnlFwdErrCorrection | 0 | 0 | The Forward error correction to be used |
| 1.3.6.1.4.1.1751.2.18.24.3.1.14 | viprSubChnlInterworkingType | 0 | 0 | The Encapsulation type used for Frame relay subchannels |
| 1.3.6.1.4.1.1751.2.18.24.3.1.15 | viprSubChnlFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.16 | viprSubChnlComBurstSize | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direct… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.17 | viprSubChnlExcessBurstSize | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress directio… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.18 | viprSubChnlCommitedInfoRate | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in … |
| 1.3.6.1.4.1.1751.2.18.24.3.1.19 | viprSubChnlTimeInterval | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.20 | viprSubChnlAtmPeakCellRate | 0 | 0 | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.21 | viprSubChnlAtmSustainedCellRate | 0 | 0 | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.22 | viprSubChnlAtmMaxBurstSize | 0 | 0 | Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.23 | viprSubChnlFrPeakCellRate | 0 | 0 | Peak cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.24 | viprSubChnlFrSustainedCellRate | 0 | 0 | Sustained cell rate, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.25 | viprSubChnlFrMaxBurstSize | 0 | 0 | Maximum burst size, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.26 | viprSubChnlFlowType | 0 | 0 | The type of flow |
| 1.3.6.1.4.1.1751.2.18.24.3.1.27 | viprSubChnlAdminStatus | 0 | 0 | This variable represents the various X.731 states the Sub Channel state machine can take Administartively |
| 1.3.6.1.4.1.1751.2.18.24.3.1.28 | viprSubChnlOperStatus | 0 | 0 | This variable represents the various X.731 states the Sub Channel state machine can take Operationally |
| 1.3.6.1.4.1.1751.2.18.24.3.1.29 | viprSubChnlInitTmr | 0 | 0 | This variable describes the waiting period in the locked-Init state before moving onto locked-Diable state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.30 | viprSubChnlDisabWarnTmr | 0 | 0 | This variable describes the periodicity in which the error messages are to be flashed when the system is in unlocked-Disable stat… |
| 1.3.6.1.4.1.1751.2.18.24.3.1.31 | viprSubChnlShutDwnWarnTmr | 0 | 0 | This variable describes the periodicity in which the error messages are to be flashed when the system is in locked-Shutting state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.32 | viprSubChnlDisableWarning | 0 | 0 | This variable when disabled will mask all the Disable warning messages. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.33 | viprSubChnlDisableReason | 0 | 0 | This variable describes the reason why the SubChnl in the unlocked-Disabled state. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.34 | viprSubChnlRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.24.3.1.35 | viprSubChnlImIpAddr | 0 | 0 | inband management IpAddr |
| 1.3.6.1.4.1.1751.2.18.24.3.1.36 | viprSubChnlImMask | 0 | 0 | inband management Mask |
| 1.3.6.1.4.1.1751.2.18.24.3.1.37 | viprSubChnlViB | 0 | 0 | The viB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.38 | viprSubChnlVUNIB | 0 | 0 | The VUNIB value of the connection |
| 1.3.6.1.4.1.1751.2.18.24.3.1.39 | viprSubChnlTrafficShaping | 0 | 0 | Traffic Shaping Support in the A2B direction for outgoing ATM connections. |
| 1.3.6.1.4.1.1751.2.18.24.3.1.40 | viprSubChnlAtmOamStatus | 0 | 0 | Indicates the OAM monitoring status. The 3 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only an end poi… |