virtual interface supp off/on
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
virtual interface supp off/on
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmUniViSuppFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "virtual interface supp off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 42 }
atmUniViSuppFlag OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "virtual interface supp off/on" DEFVAL { disabled } ::= { atmUniConfigEntry 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.1.1.1 | atmUniIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.1.1.2 | atmUniAddrType | 0 | 0 | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.1.1.3 | atmUniSvcMinVpi | 0 | 0 | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.4 | atmUniSvcMaxVpi | 0 | 0 | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.5 | atmUniSvcMinVci | 0 | 0 | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.6 | atmUniSvcMaxVci | 0 | 0 | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.7 | atmUniAdminStatus | 0 | 0 | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.8 | atmUniOperStatus | 0 | 0 | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.1.1.9 | atmUniNwPrefix1 | 0 | 0 | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.1.1.10 | atmUniOverSubscription | 0 | 0 | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.1.1.11 | atmUniT303 | 0 | 0 | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.12 | atmUniT308 | 0 | 0 | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.13 | atmUniT309 | 0 | 0 | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.14 | atmUniT310 | 0 | 0 | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.15 | atmUniT313 | 0 | 0 | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.16 | atmUniT316 | 0 | 0 | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.17 | atmUniT317 | 0 | 0 | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.18 | atmUniT322 | 0 | 0 | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.19 | atmUniT398 | 0 | 0 | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.20 | atmUniT399 | 0 | 0 | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.21 | atmUniMyNeighborIpAddress | 0 | 0 | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.22 | atmUniMyNeighborIfName | 0 | 0 | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.23 | atmUniVpiSig | 0 | 0 | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.24 | atmUniVciSig | 0 | 0 | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.25 | atmUniVpiIlmi | 0 | 0 | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.26 | atmUniVciIlmi | 0 | 0 | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.27 | atmUniAtmSignalingStatus | 0 | 0 | Indicates if atm signaling is enabled or disabled for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.29 | atmUniMyIfName | 0 | 0 | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.30 | atmUniIlmiProtocolStatus | 0 | 0 | The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.31 | atmUniIlmiOperStatus | 0 | 0 | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.32 | atmUniIlmiConfigProc | 0 | 0 | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.33 | atmUniIlmiConnectProc | 0 | 0 | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.34 | atmUniIlmiAttachPtProc | 0 | 0 | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.35 | atmUniIlmiSecureLinkProc | 0 | 0 | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.36 | atmUniIlmiAddrRegProc | 0 | 0 | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.37 | atmUniIlmiTimerS | 0 | 0 | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.38 | atmUniIlmiTimerT | 0 | 0 | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.39 | atmUniIlmiRetryK | 0 | 0 | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.40 | atmUniIntfType | 0 | 0 | atmUniIntftype |
| 1.3.6.1.4.1.1751.2.18.5.1.1.41 | atmUniUserAddress | 0 | 0 | ATM User Address |
| 1.3.6.1.4.1.1751.2.18.5.1.1.43 | atmUniUPCSupp | 0 | 0 | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.44 | atmUniUbrLoadBalSupp | 0 | 0 | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.45 | atmUniAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for |
| 1.3.6.1.4.1.1751.2.18.5.1.1.46 | atmUniAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be acc… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.47 | atmUniVUNISuppFlag | 0 | 0 | virtual UNI interface supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.48 | atmUniUserAddrOrgScope | 0 | 0 | ATM User Address Organizational scope |
| 1.3.6.1.4.1.1751.2.18.5.1.1.49 | atmUniSscopRxWndSz | 0 | 0 | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.1.1.50 | atmUniConnTrafficShapingFlag | 0 | 0 | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the… |