The Avail Bandwidth for that interface in
cells per sec which can go out of the
interface. Bandwidth for UBR conns
will not be accounted for
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
The Avail Bandwidth for that interface in
cells per sec which can go out of the
interface. Bandwidth for UBR conns
will not be accounted for
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmUniAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for" DEFVAL { 0 } ::= { atmUniConfigEntry 46 }
atmUniAvailBwEgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Avail Bandwidth for that interface in cells per sec which can go out of the interface. Bandwidth for UBR conns will not be accounted for" DEFVAL { 0 } ::= { atmUniConfigEntry 46 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.1.1.1 | atmUniIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.1.1.2 | atmUniAddrType | 0 | 0 | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.1.1.3 | atmUniSvcMinVpi | 0 | 0 | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.4 | atmUniSvcMaxVpi | 0 | 0 | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.5 | atmUniSvcMinVci | 0 | 0 | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.6 | atmUniSvcMaxVci | 0 | 0 | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.7 | atmUniAdminStatus | 0 | 0 | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.8 | atmUniOperStatus | 0 | 0 | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.1.1.9 | atmUniNwPrefix1 | 0 | 0 | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.1.1.10 | atmUniOverSubscription | 0 | 0 | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.1.1.11 | atmUniT303 | 0 | 0 | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.12 | atmUniT308 | 0 | 0 | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.13 | atmUniT309 | 0 | 0 | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.14 | atmUniT310 | 0 | 0 | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.15 | atmUniT313 | 0 | 0 | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.16 | atmUniT316 | 0 | 0 | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.17 | atmUniT317 | 0 | 0 | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.18 | atmUniT322 | 0 | 0 | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.19 | atmUniT398 | 0 | 0 | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.20 | atmUniT399 | 0 | 0 | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.1.1.21 | atmUniMyNeighborIpAddress | 0 | 0 | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.22 | atmUniMyNeighborIfName | 0 | 0 | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. … |
| 1.3.6.1.4.1.1751.2.18.5.1.1.23 | atmUniVpiSig | 0 | 0 | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.24 | atmUniVciSig | 0 | 0 | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.25 | atmUniVpiIlmi | 0 | 0 | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.26 | atmUniVciIlmi | 0 | 0 | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.27 | atmUniAtmSignalingStatus | 0 | 0 | Indicates if atm signaling is enabled or disabled for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.29 | atmUniMyIfName | 0 | 0 | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value… |
| 1.3.6.1.4.1.1751.2.18.5.1.1.30 | atmUniIlmiProtocolStatus | 0 | 0 | The administrative status: 'enabled' - ILMI protocol enabled on UNI 'disabled' - ILMI protocol disabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.31 | atmUniIlmiOperStatus | 0 | 0 | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.32 | atmUniIlmiConfigProc | 0 | 0 | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.33 | atmUniIlmiConnectProc | 0 | 0 | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.34 | atmUniIlmiAttachPtProc | 0 | 0 | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.35 | atmUniIlmiSecureLinkProc | 0 | 0 | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.36 | atmUniIlmiAddrRegProc | 0 | 0 | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.37 | atmUniIlmiTimerS | 0 | 0 | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.38 | atmUniIlmiTimerT | 0 | 0 | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.39 | atmUniIlmiRetryK | 0 | 0 | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.1.1.40 | atmUniIntfType | 0 | 0 | atmUniIntftype |
| 1.3.6.1.4.1.1751.2.18.5.1.1.41 | atmUniUserAddress | 0 | 0 | ATM User Address |
| 1.3.6.1.4.1.1751.2.18.5.1.1.42 | atmUniViSuppFlag | 0 | 0 | virtual interface supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.43 | atmUniUPCSupp | 0 | 0 | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.44 | atmUniUbrLoadBalSupp | 0 | 0 | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.45 | atmUniAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for |
| 1.3.6.1.4.1.1751.2.18.5.1.1.47 | atmUniVUNISuppFlag | 0 | 0 | virtual UNI interface supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.1.1.48 | atmUniUserAddrOrgScope | 0 | 0 | ATM User Address Organizational scope |
| 1.3.6.1.4.1.1751.2.18.5.1.1.49 | atmUniSscopRxWndSz | 0 | 0 | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.1.1.50 | atmUniConnTrafficShapingFlag | 0 | 0 | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the… |