Indicates whether the remote VPI/VCI values are to
be used at the destination. If 'any' is used, the
destination switch will choose the VPI/VCI values.
In such a case, once the SPVC is connected, the
value of this object will change to 'required',
such that the same VPI/VCI values will continue to
be used even if the connection is torn down and
re-established. If the value 'required' is
specified, the values: atmSpvcVccRemoteVpi and
atmSpvcVccRemoteVci, must be supplied and are used
at the destination.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Indicates whether the remote VPI/VCI values are to
be used at the destination. If 'any' is used, the
destination switch will choose the VPI/VCI values.
In such a case, once the SPVC is connected, the
value of this object will change to 'required',
such that the same VPI/VCI values will continue to
be used even if the connection is torn down and
re-established. If the value 'required' is
specified, the values: atmSpvcVccRemoteVpi and
atmSpvcVccRemoteVci, must be supplied and are used
at the destination.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmSpvcVccRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmSpvcVccRemoteVpi and atmSpvcVccRemoteVci, must be supplied and are used at the destination." ::= { atmSpvcVccActiveSvcEntry 2 }
atmSpvcVccRemoteSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will choose the VPI/VCI values. In such a case, once the SPVC is connected, the value of this object will change to 'required', such that the same VPI/VCI values will continue to be used even if the connection is torn down and re-established. If the value 'required' is specified, the values: atmSpvcVccRemoteVpi and atmSpvcVccRemoteVci, must be supplied and are used at the destination." ::= { atmSpvcVccActiveSvcEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.18.1.1 | atmSpvcVccRemoteAtmPortAddr | 0 | 0 | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.3 | atmSpvcVccRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmSpvcVc… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.4 | atmSpvcVccRemoteVci | 0 | 0 | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmSpvcV… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.5 | atmSpvcVccRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retry will … |
| 1.3.6.1.4.1.1751.2.18.6.18.1.6 | atmSpvcVccRetryLimit | 0 | 0 | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.7 | atmSpvcVccRestart | 0 | 0 | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.8 | atmSpvcVccRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.18.1.9 | atmSpvcVccReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.18.1.10 | atmSpvcVccReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |