The time interval over which CIR and the burst
sizes (Bc and Be) are measured in the A2B
direction. The unit is milliseconds.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
The time interval over which CIR and the burst
sizes (Bc and Be) are measured in the A2B
direction. The unit is milliseconds.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
frAtmSpvcVccTimeLenIn OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmSpvcVccEntry 15 }
frAtmSpvcVccTimeLenIn OBJECT-TYPE SYNTAX INTEGER (64..4000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds." DEFVAL { 1000 } ::= { frAtmSpvcVccEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.32.1.1 | frAtmSpvcVccDlciA | 0 | 0 | DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 102… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.2 | frAtmSpvcVccIfB | 0 | 0 | Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface … |
| 1.3.6.1.4.1.1751.2.18.6.32.1.3 | frAtmSpvcVccVpiB | 0 | 0 | VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.4 | frAtmSpvcVccVciB | 0 | 0 | VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.5 | frAtmSpvcVccMaxFrameSizeIn | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress directio… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.6 | frAtmSpvcVccBcIn | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direc… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.7 | frAtmSpvcVccBeIn | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress directi… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.8 | frAtmSpvcVccCirIn | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.9 | frAtmSpvcVccMaxFrameSizeOut | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.10 | frAtmSpvcVccBcOut | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direct… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.11 | frAtmSpvcVccBeOut | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress directio… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.12 | frAtmSpvcVccCirOut | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.13 | frAtmSpvcVccServiceType | 0 | 0 | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.14 | frAtmSpvcVccFlow | 0 | 0 | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.32.1.16 | frAtmSpvcVccTimeLenOut | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.17 | frAtmSpvcVccPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.18 | frAtmSpvcVccSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.19 | frAtmSpvcVccMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.20 | frAtmSpvcVccPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.21 | frAtmSpvcVccSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.22 | frAtmSpvcVccMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.23 | frAtmSpvcVccInterWorkingFunc | 0 | 0 | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.24 | frAtmSpvcVccConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.32.1.25 | frAtmSpvcVccOperStatus | 0 | 0 | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.26 | frAtmSpvcVccRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.6.32.1.27 | frAtmSpvcVccRemoteFrPortAddr | 0 | 0 | The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the act… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.28 | frAtmSpvcVccRemoteSelectType | 0 | 0 | Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch wil… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.29 | frAtmSpvcVccRemoteDlci | 0 | 0 | DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.30 | frAtmSpvcVccRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvc… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.31 | frAtmSpvcVccRemoteVci | 0 | 0 | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.32 | frAtmSpvcVccRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted i… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.33 | frAtmSpvcVccRetryLimit | 0 | 0 | A maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.34 | frAtmSpvcVccRestart | 0 | 0 | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.32.1.35 | frAtmSpvcVccRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.36 | frAtmSpvcVccReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.37 | frAtmSpvcVccReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.38 | frAtmSpvcVccRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.39 | frAtmSpvcVccStatsCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.40 | frAtmSpvcVccStatsCellsEncodedLoA | 0 | 0 | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.41 | frAtmSpvcVccStatsCellsDecodedHiA | 0 | 0 | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.42 | frAtmSpvcVccStatsCellsDecodedLoA | 0 | 0 | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.43 | frAtmSpvcVccStatsInCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.44 | frAtmSpvcVccStatsInCellCountLoB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.45 | frAtmSpvcVccStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.46 | frAtmSpvcVccStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.47 | frAtmSpvcVccStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.32.1.48 | frAtmSpvcVccStatsFramesDroppedA | 0 | 0 | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.49 | frAtmSpvcVccStatsOdometerCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.50 | frAtmSpvcVccStatsOdometerCellsEncodedLoA | 0 | 0 | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.51 | frAtmSpvcVccStatsOdometerCellsDecodedHiA | 0 | 0 | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.52 | frAtmSpvcVccStatsOdometerCellsDecodedLoA | 0 | 0 | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.53 | frAtmSpvcVccStatsInOdometerCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.54 | frAtmSpvcVccStatsInOdometerCellCountLoB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.55 | frAtmSpvcVccStatsOutOdometerCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.56 | frAtmSpvcVccStatsOutOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.57 | frAtmSpvcVccStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.58 | frAtmSpvcVccStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.59 | frAtmSpvcVccStatsAal5ErrFramesA | 0 | 0 | Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.60 | frAtmSpvcVccStatsFramesTaggedA | 0 | 0 | Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.61 | frAtmSpvcVccStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.62 | frAtmSpvcVccStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.63 | frAtmSpvcVccVUNIB | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.32.1.64 | frAtmSpvcVccTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.65 | frAtmSpvcVccPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |