The value of this object is the size in octets of
the largest frame relay information field for this
SPVC in the ingress direction (out of the frame
relay UNI).
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
The value of this object is the size in octets of
the largest frame relay information field for this
SPVC in the ingress direction (out of the frame
relay UNI).
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
frAtmSpvcVccMaxFrameSizeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmSpvcVccEntry 5 }
frAtmSpvcVccMaxFrameSizeIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is the size in octets of the largest frame relay information field for this SPVC in the ingress direction (out of the frame relay UNI)." DEFVAL { 4096 } ::= { frAtmSpvcVccEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.32.1.1 | frAtmSpvcVccDlciA | 0 | 0 | DLCI value for side A, the frame relay side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 102… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.2 | frAtmSpvcVccIfB | 0 | 0 | Interface index for side B, the atm side, of a frame relay-atm SPVC VCC connection. Number value is interpreted as an interface … |
| 1.3.6.1.4.1.1751.2.18.6.32.1.3 | frAtmSpvcVccVpiB | 0 | 0 | VPI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.4 | frAtmSpvcVccVciB | 0 | 0 | VCI value for side B, the atm side, of a frame relay-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.6 | frAtmSpvcVccBcIn | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the ingress direc… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.7 | frAtmSpvcVccBeIn | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the ingress directi… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.8 | frAtmSpvcVccCirIn | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.9 | frAtmSpvcVccMaxFrameSizeOut | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this SPVC in the egress direction… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.10 | frAtmSpvcVccBcOut | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this SPVC in the egress direct… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.11 | frAtmSpvcVccBeOut | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this SPVC in the egress directio… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.12 | frAtmSpvcVccCirOut | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this SPVC in… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.13 | frAtmSpvcVccServiceType | 0 | 0 | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.14 | frAtmSpvcVccFlow | 0 | 0 | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.32.1.15 | frAtmSpvcVccTimeLenIn | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.16 | frAtmSpvcVccTimeLenOut | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.17 | frAtmSpvcVccPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.18 | frAtmSpvcVccSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.19 | frAtmSpvcVccMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.20 | frAtmSpvcVccPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.21 | frAtmSpvcVccSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.22 | frAtmSpvcVccMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.23 | frAtmSpvcVccInterWorkingFunc | 0 | 0 | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.24 | frAtmSpvcVccConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.32.1.25 | frAtmSpvcVccOperStatus | 0 | 0 | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.26 | frAtmSpvcVccRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.6.32.1.27 | frAtmSpvcVccRemoteFrPortAddr | 0 | 0 | The ATM address supporting the corresponding far end FR IWF process. If no address is supplied, no attempts to establish the act… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.28 | frAtmSpvcVccRemoteSelectType | 0 | 0 | Indicates whether the remote DLCI/VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch wil… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.29 | frAtmSpvcVccRemoteDlci | 0 | 0 | DLCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.30 | frAtmSpvcVccRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If frAtmSpvc… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.31 | frAtmSpvcVccRemoteVci | 0 | 0 | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If frAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.32 | frAtmSpvcVccRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retry will be attempted i… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.33 | frAtmSpvcVccRetryLimit | 0 | 0 | A maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.34 | frAtmSpvcVccRestart | 0 | 0 | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.32.1.35 | frAtmSpvcVccRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.32.1.36 | frAtmSpvcVccReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.37 | frAtmSpvcVccReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.38 | frAtmSpvcVccRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.39 | frAtmSpvcVccStatsCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.40 | frAtmSpvcVccStatsCellsEncodedLoA | 0 | 0 | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.41 | frAtmSpvcVccStatsCellsDecodedHiA | 0 | 0 | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.42 | frAtmSpvcVccStatsCellsDecodedLoA | 0 | 0 | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.43 | frAtmSpvcVccStatsInCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.44 | frAtmSpvcVccStatsInCellCountLoB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.45 | frAtmSpvcVccStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.46 | frAtmSpvcVccStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.47 | frAtmSpvcVccStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.32.1.48 | frAtmSpvcVccStatsFramesDroppedA | 0 | 0 | Number of frames dropped for a given DLCI for A2B direction, only applicable to the input side. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.49 | frAtmSpvcVccStatsOdometerCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.50 | frAtmSpvcVccStatsOdometerCellsEncodedLoA | 0 | 0 | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.51 | frAtmSpvcVccStatsOdometerCellsDecodedHiA | 0 | 0 | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.52 | frAtmSpvcVccStatsOdometerCellsDecodedLoA | 0 | 0 | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.53 | frAtmSpvcVccStatsInOdometerCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.54 | frAtmSpvcVccStatsInOdometerCellCountLoB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.55 | frAtmSpvcVccStatsOutOdometerCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.56 | frAtmSpvcVccStatsOutOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.32.1.57 | frAtmSpvcVccStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.58 | frAtmSpvcVccStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.59 | frAtmSpvcVccStatsAal5ErrFramesA | 0 | 0 | Number of Aal5 Errored Frames, which are not dropped due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.60 | frAtmSpvcVccStatsFramesTaggedA | 0 | 0 | Number of Frames tagged due to UPC in A2B dir, only applicable to Input Side |
| 1.3.6.1.4.1.1751.2.18.6.32.1.61 | frAtmSpvcVccStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.62 | frAtmSpvcVccStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.32.1.63 | frAtmSpvcVccVUNIB | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.32.1.64 | frAtmSpvcVccTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.32.1.65 | frAtmSpvcVccPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |