The active SVC is released, if necessary, and a
new setup procedure is begun if 'restart',
otherwise, noop.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
The active SVC is released, if necessary, and a
new setup procedure is begun if 'restart',
otherwise, noop.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmAtmSpvcVccEntry 30 }
atmAtmSpvcVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop." ::= { atmAtmSpvcVccEntry 30 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.33.1.1 | atmAtmSpvcVccVpiA | 0 | 0 | VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.2 | atmAtmSpvcVccVciA | 0 | 0 | VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.3 | atmAtmSpvcVccRemoteAtmPortAddr | 0 | 0 | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.4 | atmAtmSpvcVccIfB | 0 | 0 | Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.5 | atmAtmSpvcVccVpiB | 0 | 0 | VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.6 | atmAtmSpvcVccVciB | 0 | 0 | VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.7 | atmAtmSpvcVccServiceTypeA2B | 0 | 0 | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.8 | atmAtmSpvcVccSarTypeA2B | 0 | 0 | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.9 | atmAtmSpvcVccPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.10 | atmAtmSpvcVccSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.11 | atmAtmSpvcVccMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.12 | atmAtmSpvcVccFrwdErrCorrectionA2B | 0 | 0 | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.13 | atmAtmSpvcVccServiceTypeB2A | 0 | 0 | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.14 | atmAtmSpvcVccSarTypeB2A | 0 | 0 | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.15 | atmAtmSpvcVccPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.16 | atmAtmSpvcVccSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.17 | atmAtmSpvcVccMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.18 | atmAtmSpvcVccFrwdErrCorrectionB2A | 0 | 0 | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.19 | atmAtmSpvcVccFlow | 0 | 0 | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.20 | atmAtmSpvcVccType | 0 | 0 | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.21 | atmAtmSpvcVccConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.22 | atmAtmSpvcVccLeafReference | 0 | 0 | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.23 | atmAtmSpvcVccOperStatus | 0 | 0 | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not ope… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.24 | atmAtmSpvcVccRowStatus | 0 | 0 | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.25 | atmAtmSpvcVccRemoteSelectType | 0 | 0 | Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will cho… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.26 | atmAtmSpvcVccRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.27 | atmAtmSpvcVccRemoteVci | 0 | 0 | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSp… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.28 | atmAtmSpvcVccRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries wil… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.29 | atmAtmSpvcVccRetryLimit | 0 | 0 | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.31 | atmAtmSpvcVccRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.32 | atmAtmSpvcVccReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.33 | atmAtmSpvcVccReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.34 | atmAtmSpvcVccRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.35 | atmAtmSpvcVccStatsInCellCountHiA | 0 | 0 | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.36 | atmAtmSpvcVccStatsInCellCountLoA | 0 | 0 | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.37 | atmAtmSpvcVccStatsOutCellCountHiA | 0 | 0 | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.38 | atmAtmSpvcVccStatsOutCellCountLoA | 0 | 0 | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.39 | atmAtmSpvcVccStatsInCellCountHiB | 0 | 0 | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.40 | atmAtmSpvcVccStatsInCellCountLoB | 0 | 0 | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.41 | atmAtmSpvcVccStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.42 | atmAtmSpvcVccStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.43 | atmAtmSpvcVccStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.33.1.44 | atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B | 0 | 0 | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto ra… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.45 | atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A | 0 | 0 | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto ra… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.46 | atmAtmSpvcVccStatsInOdometerCellCountHiA | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.47 | atmAtmSpvcVccStatsInOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.48 | atmAtmSpvcVccStatsOutOdometerCellCountHiA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.49 | atmAtmSpvcVccStatsOutOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.50 | atmAtmSpvcVccStatsInOdometerCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.51 | atmAtmSpvcVccStatsInOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.52 | atmAtmSpvcVccStatsOutOdometerCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.53 | atmAtmSpvcVccStatsOutOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.54 | atmAtmSpvcVccStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.55 | atmAtmSpvcVccStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.56 | atmAtmSpvcVccViA | 0 | 0 | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.57 | atmAtmSpvcVccViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.58 | atmAtmSpvcVccStatsCellsDroppedA | 0 | 0 | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.59 | atmAtmSpvcVccStatsCellsTaggedA | 0 | 0 | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.60 | atmAtmSpvcVccStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.61 | atmAtmSpvcVccStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.62 | atmAtmSpvcVccVUNIA | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.63 | atmAtmSpvcVccVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.64 | atmAtmSpvcVccTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.65 | atmAtmSpvcVccTrafficShapingB2A | 0 | 0 | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.66 | atmAtmSpvcVccPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |