Displays the Forward error correction rate being
used by the FEC module in the A2B direction. This
field is dynamic when Auto rates are selected. In
other cases, it will display the rate set by the
user.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Displays the Forward error correction rate being
used by the FEC module in the A2B direction. This
field is dynamic when Auto rates are selected. In
other cases, it will display the rate set by the
user.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVccEntry 44 }
atmAtmSpvcVccStatsFrwdErrCrrctnRateA2B OBJECT-TYPE SYNTAX INTEGER { none(1), eighthRate(2), quarterRate(3), halfRate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto rates are selected. In other cases, it will display the rate set by the user." DEFVAL { none } ::= { atmAtmSpvcVccEntry 44 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.33.1.1 | atmAtmSpvcVccVpiA | 0 | 0 | VPI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.2 | atmAtmSpvcVccVciA | 0 | 0 | VCI value for side A of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.3 | atmAtmSpvcVccRemoteAtmPortAddr | 0 | 0 | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.4 | atmAtmSpvcVccIfB | 0 | 0 | Interface index for side B of an ATM SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.5 | atmAtmSpvcVccVpiB | 0 | 0 | VPI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.6 | atmAtmSpvcVccVciB | 0 | 0 | VCI value for side B of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.7 | atmAtmSpvcVccServiceTypeA2B | 0 | 0 | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.8 | atmAtmSpvcVccSarTypeA2B | 0 | 0 | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.9 | atmAtmSpvcVccPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.10 | atmAtmSpvcVccSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.11 | atmAtmSpvcVccMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.12 | atmAtmSpvcVccFrwdErrCorrectionA2B | 0 | 0 | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.13 | atmAtmSpvcVccServiceTypeB2A | 0 | 0 | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.14 | atmAtmSpvcVccSarTypeB2A | 0 | 0 | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.15 | atmAtmSpvcVccPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.16 | atmAtmSpvcVccSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.17 | atmAtmSpvcVccMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.18 | atmAtmSpvcVccFrwdErrCorrectionB2A | 0 | 0 | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.19 | atmAtmSpvcVccFlow | 0 | 0 | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.20 | atmAtmSpvcVccType | 0 | 0 | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.21 | atmAtmSpvcVccConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.22 | atmAtmSpvcVccLeafReference | 0 | 0 | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.23 | atmAtmSpvcVccOperStatus | 0 | 0 | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not ope… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.24 | atmAtmSpvcVccRowStatus | 0 | 0 | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.25 | atmAtmSpvcVccRemoteSelectType | 0 | 0 | Indicates whether the remote VPI/VCI values are to be used at the destination. If 'any' is used, the destination switch will cho… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.26 | atmAtmSpvcVccRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 4095. If atmAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.27 | atmAtmSpvcVccRemoteVci | 0 | 0 | VCI value to be used at the destination of an ATM SPVC VCC connection. Valid range is a number between 0 and 65535. If atmAtmSp… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.28 | atmAtmSpvcVccRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries wil… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.29 | atmAtmSpvcVccRetryLimit | 0 | 0 | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.30 | atmAtmSpvcVccRestart | 0 | 0 | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.31 | atmAtmSpvcVccRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.32 | atmAtmSpvcVccReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.33 | atmAtmSpvcVccReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.34 | atmAtmSpvcVccRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.35 | atmAtmSpvcVccStatsInCellCountHiA | 0 | 0 | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.36 | atmAtmSpvcVccStatsInCellCountLoA | 0 | 0 | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.37 | atmAtmSpvcVccStatsOutCellCountHiA | 0 | 0 | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.38 | atmAtmSpvcVccStatsOutCellCountLoA | 0 | 0 | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.39 | atmAtmSpvcVccStatsInCellCountHiB | 0 | 0 | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.40 | atmAtmSpvcVccStatsInCellCountLoB | 0 | 0 | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.41 | atmAtmSpvcVccStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.42 | atmAtmSpvcVccStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.43 | atmAtmSpvcVccStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.33.1.45 | atmAtmSpvcVccStatsFrwdErrCrrctnRateB2A | 0 | 0 | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto ra… |
| 1.3.6.1.4.1.1751.2.18.6.33.1.46 | atmAtmSpvcVccStatsInOdometerCellCountHiA | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.47 | atmAtmSpvcVccStatsInOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.48 | atmAtmSpvcVccStatsOutOdometerCellCountHiA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.49 | atmAtmSpvcVccStatsOutOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.50 | atmAtmSpvcVccStatsInOdometerCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.51 | atmAtmSpvcVccStatsInOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.52 | atmAtmSpvcVccStatsOutOdometerCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.53 | atmAtmSpvcVccStatsOutOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.33.1.54 | atmAtmSpvcVccStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.55 | atmAtmSpvcVccStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.56 | atmAtmSpvcVccViA | 0 | 0 | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.57 | atmAtmSpvcVccViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.58 | atmAtmSpvcVccStatsCellsDroppedA | 0 | 0 | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.59 | atmAtmSpvcVccStatsCellsTaggedA | 0 | 0 | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.33.1.60 | atmAtmSpvcVccStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.61 | atmAtmSpvcVccStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.33.1.62 | atmAtmSpvcVccVUNIA | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.63 | atmAtmSpvcVccVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.33.1.64 | atmAtmSpvcVccTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.65 | atmAtmSpvcVccTrafficShapingB2A | 0 | 0 | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.33.1.66 | atmAtmSpvcVccPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |