Interface index for side B, the atm side, of a
variable bit rate-atm SPVC VCC connection. Number
value is interpreted as an interface of the form,
SSPPCCC, where SS is the card slot, PP is the port
number, and CCC is the channel number.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Interface index for side B, the atm side, of a
variable bit rate-atm SPVC VCC connection. Number
value is interpreted as an interface of the form,
SSPPCCC, where SS is the card slot, PP is the port
number, and CCC is the channel number.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
vbrAtmSpvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcEntry 2 }
vbrAtmSpvcIfB OBJECT-TYPE SYNTAX IntfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Number value is interpreted as an interface of the form, SSPPCCC, where SS is the card slot, PP is the port number, and CCC is the channel number." ::= { vbrAtmSpvcEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.35.1.1 | vbrAtmSpvcRemoteVbrPortAddr | 0 | 0 | remote VBR port nsap address implemening IWF, not meaningful if passive type of connection |
| 1.3.6.1.4.1.1751.2.18.6.35.1.3 | vbrAtmSpvcVpiB | 0 | 0 | VPI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.4 | vbrAtmSpvcVciB | 0 | 0 | VCI value for side B, the atm side, of a variable bit rate-atm SPVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.5 | vbrAtmSpvcServiceType | 0 | 0 | service type |
| 1.3.6.1.4.1.1751.2.18.6.35.1.6 | vbrAtmSpvcPeakCellRateA2B | 0 | 0 | peak cell rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.35.1.7 | vbrAtmSpvcSusCellRateA2B | 0 | 0 | sustained rate - side A, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.35.1.8 | vbrAtmSpvcMaxBurstSizeA2B | 0 | 0 | maximum burst size - side A, in cells |
| 1.3.6.1.4.1.1751.2.18.6.35.1.9 | vbrAtmSpvcPeakCellRateB2A | 0 | 0 | peak rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.10 | vbrAtmSpvcSusCellRateB2A | 0 | 0 | sustained rate - side B, ATM trunk, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.11 | vbrAtmSpvcMaxBurstSizeB2A | 0 | 0 | maximum burst size - side B, ATM trunk, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.12 | vbrAtmSpvcFlow | 0 | 0 | type of flow |
| 1.3.6.1.4.1.1751.2.18.6.35.1.13 | vbrAtmSpvcConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established; passiveSvc - accepts calls |
| 1.3.6.1.4.1.1751.2.18.6.35.1.14 | vbrAtmSpvcOperStatus | 0 | 0 | other - none of the types specified below; establishmentInProgress - connection is not operational, but call attempts are ongoing… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.15 | vbrAtmSpvcRowStatus | 0 | 0 | Used to create and delete a soft PVCC. When this object is set to 'active' an attempt is made to set up the soft PVCC. When thi… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.16 | vbrAtmSpvcViB | 0 | 0 | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.35.1.17 | vbrAtmSpvcRetryInterval | 0 | 0 | the time to wait before attempting to establish the SVC after previous failed call attempt. 0 indicates retries will be attempted… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.18 | vbrAtmSpvcRetryLimit | 0 | 0 | a maximum limit on how many retries. 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.19 | vbrAtmSpvcRestart | 0 | 0 | restart, the active SVC is released if necessary and a new setup procedure is begun; or noop |
| 1.3.6.1.4.1.1751.2.18.6.35.1.20 | vbrAtmSpvcRetryFailure | 0 | 0 | indicates how many attempts to establish the connection have failed. It is reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.35.1.21 | vbrAtmSpvcReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.35.1.22 | vbrAtmSpvcReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC |
| 1.3.6.1.4.1.1751.2.18.6.35.1.23 | vbrAtmSpvcRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.24 | vbrAtmSpvcStatsCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.25 | vbrAtmSpvcStatsCellsEncodedLoA | 0 | 0 | ells encoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.26 | vbrAtmSpvcStatsCellsDecodedHiA | 0 | 0 | Cells decoded on side A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.27 | vbrAtmSpvcStatsCellsDecodedLoA | 0 | 0 | Cells decoded on side A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.28 | vbrAtmSpvcStatsInCellCountHiB | 0 | 0 | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.29 | vbrAtmSpvcStatsInCellCountLoB | 0 | 0 | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.30 | vbrAtmSpvcStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.31 | vbrAtmSpvcStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.32 | vbrAtmSpvcStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.35.1.33 | vbrAtmSpvcStatsOdometerCellsEncodedHiA | 0 | 0 | Cells encoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.34 | vbrAtmSpvcStatsOdometerCellsEncodedLoA | 0 | 0 | Cells encoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.35 | vbrAtmSpvcStatsOdometerCellsDecodedHiA | 0 | 0 | Cells decoded on side A- (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.36 | vbrAtmSpvcStatsOdometerCellsDecodedLoA | 0 | 0 | Cells decoded on side A- (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.37 | vbrAtmSpvcStatsInOdometerCellCountHiB | 0 | 0 | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.38 | vbrAtmSpvcStatsInOdometerCellCountLoB | 0 | 0 | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.39 | vbrAtmSpvcStatsOutOdometerCellCountHiB | 0 | 0 | Valid Cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.40 | vbrAtmSpvcStatsOutOdometerCellCountLoB | 0 | 0 | Valid Cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.35.1.41 | vbrAtmSpvcStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.42 | vbrAtmSpvcStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.43 | vbrAtmSpvcStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.35.1.44 | vbrAtmSpvcStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.35.1.45 | vbrAtmSpvcVUNIB | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.35.1.46 | vbrAtmSpvcTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.35.1.47 | vbrAtmSpvcPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |