CuTimer represents 'combined use timer',
is set to zero such that every ATM cell
transmitted contains one, and only one,
AAL2 packet, and the first octet of the AAL2
packet header follows immediately after
the Start Field in the ATM cell payload. If the
AAL2 packet payload is less than 44 octets,
the remainder of the ATM cell payload
following the end of the AAL2 packet shall be
filled with zeros as padding.
Each increment of CuTimer means 5ms more to wait.
And cuTimer default value 4 means to wait 20ms
before the ATM cell is sent out.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
CuTimer represents 'combined use timer',
is set to zero such that every ATM cell
transmitted contains one, and only one,
AAL2 packet, and the first octet of the AAL2
packet header follows immediately after
the Start Field in the ATM cell payload. If the
AAL2 packet payload is less than 44 octets,
the remainder of the ATM cell payload
following the end of the AAL2 packet shall be
filled with zeros as padding.
Each increment of CuTimer means 5ms more to wait.
And cuTimer default value 4 means to wait 20ms
before the ATM cell is sent out.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
aal2TrunkCuTimer OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out." DEFVAL { 4 } ::= { aal2TrunkConfigEntry 22 }
aal2TrunkCuTimer OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 packet, and the first octet of the AAL2 packet header follows immediately after the Start Field in the ATM cell payload. If the AAL2 packet payload is less than 44 octets, the remainder of the ATM cell payload following the end of the AAL2 packet shall be filled with zeros as padding. Each increment of CuTimer means 5ms more to wait. And cuTimer default value 4 means to wait 20ms before the ATM cell is sent out." DEFVAL { 4 } ::= { aal2TrunkConfigEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.36.1.1 | aal2TrunkConfigIf | 0 | 0 | Interface Id of the Atm Side of the Aal2 Trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.2 | aal2TrunkConfigVpi | 0 | 0 | VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.3 | aal2TrunkConfigVci | 0 | 0 | VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.4 | aal2TrunkConfigServiceType | 0 | 0 | service type |
| 1.3.6.1.4.1.1751.2.18.6.36.1.5 | aal2TrunkConfigPeakCellRateIgr | 0 | 0 | peak cell rate - atm side inp, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.36.1.6 | aal2TrunkConfigSusCellRateIgr | 0 | 0 | sustained rate - atm side inp, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.36.1.7 | aal2TrunkConfigMaxBurstSizeIgr | 0 | 0 | maximum burst size - atm side inp, in cells |
| 1.3.6.1.4.1.1751.2.18.6.36.1.8 | aal2TrunkConfigPeakCellRateEgr | 0 | 0 | peak rate - atm side output, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.9 | aal2TrunkConfigSusCellRateEgr | 0 | 0 | sustained rate - atm side output,in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.10 | aal2TrunkConfigMaxBurstSizeEgr | 0 | 0 | maximum burst size - atm side output, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.11 | aal2TrunkConfigFlow | 0 | 0 | Flow type |
| 1.3.6.1.4.1.1751.2.18.6.36.1.12 | aal2TrunkConfigRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.6.36.1.13 | aal2TrunkConfigConnectionStatus | 0 | 0 | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: … |
| 1.3.6.1.4.1.1751.2.18.6.36.1.14 | aal2TrunkConfigViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.15 | aal2TrunkConfigCnfrmTypeB2A | 0 | 0 | The following is the description of this field This will be used in conjunction with the service type field to get the correct tra… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.16 | aal2TrunkConfigVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.17 | aal2TrunkAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.18 | aal2TrunkAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.19 | aal2TrunkGR303 | 0 | 0 | This flag is used to check if a GR303 Feature is enabled for the trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.20 | aal2TrunkConfigOamStatus | 0 | 0 | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is onl… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.21 | aal2TrunkConnFailureCauseB | 0 | 0 | connection status reason code |