peak cell rate - atm side inp, in cell per
second
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
peak cell rate - atm side inp, in cell per
second
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
aal2TrunkConfigPeakCellRateIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - atm side inp, in cell per second" DEFVAL { 1 } ::= { aal2TrunkConfigEntry 5 }
aal2TrunkConfigPeakCellRateIgr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "peak cell rate - atm side inp, in cell per second" DEFVAL { 1 } ::= { aal2TrunkConfigEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.36.1.1 | aal2TrunkConfigIf | 0 | 0 | Interface Id of the Atm Side of the Aal2 Trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.2 | aal2TrunkConfigVpi | 0 | 0 | VPI value for Atm side , the atm side, of a atm trunk connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.3 | aal2TrunkConfigVci | 0 | 0 | VCI value for the atm side, of a variable bit rate-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.4 | aal2TrunkConfigServiceType | 0 | 0 | service type |
| 1.3.6.1.4.1.1751.2.18.6.36.1.6 | aal2TrunkConfigSusCellRateIgr | 0 | 0 | sustained rate - atm side inp, in cell per second |
| 1.3.6.1.4.1.1751.2.18.6.36.1.7 | aal2TrunkConfigMaxBurstSizeIgr | 0 | 0 | maximum burst size - atm side inp, in cells |
| 1.3.6.1.4.1.1751.2.18.6.36.1.8 | aal2TrunkConfigPeakCellRateEgr | 0 | 0 | peak rate - atm side output, in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.9 | aal2TrunkConfigSusCellRateEgr | 0 | 0 | sustained rate - atm side output,in cell per second. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.10 | aal2TrunkConfigMaxBurstSizeEgr | 0 | 0 | maximum burst size - atm side output, in cells. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.11 | aal2TrunkConfigFlow | 0 | 0 | Flow type |
| 1.3.6.1.4.1.1751.2.18.6.36.1.12 | aal2TrunkConfigRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.6.36.1.13 | aal2TrunkConfigConnectionStatus | 0 | 0 | Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: … |
| 1.3.6.1.4.1.1751.2.18.6.36.1.14 | aal2TrunkConfigViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.15 | aal2TrunkConfigCnfrmTypeB2A | 0 | 0 | The following is the description of this field This will be used in conjunction with the service type field to get the correct tra… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.16 | aal2TrunkConfigVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.36.1.17 | aal2TrunkAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.18 | aal2TrunkAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.19 | aal2TrunkGR303 | 0 | 0 | This flag is used to check if a GR303 Feature is enabled for the trunk. |
| 1.3.6.1.4.1.1751.2.18.6.36.1.20 | aal2TrunkConfigOamStatus | 0 | 0 | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: Atm side is onl… |
| 1.3.6.1.4.1.1751.2.18.6.36.1.21 | aal2TrunkConnFailureCauseB | 0 | 0 | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.36.1.22 | aal2TrunkCuTimer | 0 | 0 | CuTimer represents 'combined use timer', is set to zero such that every ATM cell transmitted contains one, and only one, AAL2 pack… |