Indicates the current connections status.
Active: All interfaces through which the
connection is going are in service.
Inactive: One of the end interfaces of the
connection is not in service.
The rest of the states apply to connections going
through resource interfaces like DSP2 and FEC. These
interfaces are dynamically allocated.
InactiveA2B-B2A: Both the A2B and B2A resource
interfaces are not in service.
InactiveA2B: The A2B resource interface is not in
service.
InactiveB2A: The B2A resource interface is not in
service.
If an end interface and the resource interfaces
are out of service, the status will be inactive
because the end interfaces take priority.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Indicates the current connections status.
Active: All interfaces through which the
connection is going are in service.
Inactive: One of the end interfaces of the
connection is not in service.
The rest of the states apply to connections going
through resource interfaces like DSP2 and FEC. These
interfaces are dynamically allocated.
InactiveA2B-B2A: Both the A2B and B2A resource
interfaces are not in service.
InactiveA2B: The A2B resource interface is not in
service.
InactiveB2A: The B2A resource interface is not in
service.
If an end interface and the resource interfaces
are out of service, the status will be inactive
because the end interfaces take priority.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
frAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { frAtmPvcVccEntry 27 }
frAtmPvcVccConnectionStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), inactiveA2B-B2A(3), inactiveA2B(4), inactiveB2A(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current connections status. Active: All interfaces through which the connection is going are in service. Inactive: One of the end interfaces of the connection is not in service. The rest of the states apply to connections going through resource interfaces like DSP2 and FEC. These interfaces are dynamically allocated. InactiveA2B-B2A: Both the A2B and B2A resource interfaces are not in service. InactiveA2B: The A2B resource interface is not in service. InactiveB2A: The B2A resource interface is not in service. If an end interface and the resource interfaces are out of service, the status will be inactive because the end interfaces take priority." DEFVAL { inactive } ::= { frAtmPvcVccEntry 27 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.7.1.1 | frAtmPvcVccIfA | 0 | 0 | Interface index for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an int… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.2 | frAtmPvcVccDlciA | 0 | 0 | DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 1023. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.3 | frAtmPvcVccIfB | 0 | 0 | Interface index for side B, the atm side, of a frame relay-atm PVC VCC connection. Number value is interpreted as an interface o… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.4 | frAtmPvcVccVpiB | 0 | 0 | VPI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.5 | frAtmPvcVccVciB | 0 | 0 | VCI value for side B, the atm side, of a frame relay-atm PVC VCC connection. Valid range is a number between 0 and 65535. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.6 | frAtmPvcVccMaxFrameSizeIn | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC in the ingress direction… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.7 | frAtmPvcVccBcIn | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the ingress direct… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.8 | frAtmPvcVccBeIn | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the ingress directio… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.9 | frAtmPvcVccCirIn | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in … |
| 1.3.6.1.4.1.1751.2.18.6.7.1.10 | frAtmPvcVccMaxFrameSizeOut | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC in the egress direction … |
| 1.3.6.1.4.1.1751.2.18.6.7.1.11 | frAtmPvcVccBcOut | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC in the egress directi… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.12 | frAtmPvcVccBeOut | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC in the egress direction… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.13 | frAtmPvcVccCirOut | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC in … |
| 1.3.6.1.4.1.1751.2.18.6.7.1.14 | frAtmPvcVccServiceType | 0 | 0 | service type, Frame relay traffic is carried by VBR type of service only. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.15 | frAtmPvcVccFlow | 0 | 0 | Flow Type |
| 1.3.6.1.4.1.1751.2.18.6.7.1.16 | frAtmPvcVccRowStatus | 0 | 0 | row status |
| 1.3.6.1.4.1.1751.2.18.6.7.1.17 | frAtmPvcVccTimeLenIn | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.18 | frAtmPvcVccInterWorkingFuncIn | 0 | 0 | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.19 | frAtmPvcVccTimeLenOut | 0 | 0 | The time interval over which CIR and the burst sizes (Bc and Be) are measured in the A2B direction. The unit is milliseconds. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.20 | frAtmPvcVccInterWorkingFuncOut | 0 | 0 | InterWorking function. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.21 | frAtmPvcVccPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.22 | frAtmPvcVccSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.23 | frAtmPvcVccMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.24 | frAtmPvcVccPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.25 | frAtmPvcVccSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, in cells per second, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.26 | frAtmPvcVccMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side B, in cells, this will reflect the frame relay parameters in atm terms. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.28 | frAtmPvcVccDualHomed | 0 | 0 | Does this PVC need a backup Dual homing PVC. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.29 | frAtmPvcVccOamStatus | 0 | 0 | Indicates the OAM monitoring status of side A. The 2 possible states are: Unsupp: No monitoring enabled. End-Pt: A side is only … |
| 1.3.6.1.4.1.1751.2.18.6.7.1.30 | frAtmPvcVccViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.7.1.31 | frAtmPvcVccCnfrmTypeB2A | 0 | 0 | The following is the description of this field This will be used in conjunction with the service type field to get the correct tra… |
| 1.3.6.1.4.1.1751.2.18.6.7.1.32 | frAtmPvcVccVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.7.1.33 | frAtmPvcVccOAMConnEndPtStatus | 0 | 0 | Connection endpoint status. Valid only at connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.34 | frAtmPvcVccOAMSegEndPtStatus | 0 | 0 | Segment endpoint status. Valid only at segment/connection endpoint. |
| 1.3.6.1.4.1.1751.2.18.6.7.1.35 | frAtmPvcVccMfsB2A | 0 | 0 | Maximum Frame Size for GFR traffic |
| 1.3.6.1.4.1.1751.2.18.6.7.1.36 | frAtmPvcVccConnFailureCauseA | 0 | 0 | connestion status reason code |
| 1.3.6.1.4.1.1751.2.18.6.7.1.37 | frAtmPvcVccConnFailureCauseB | 0 | 0 | connection status reason code |
| 1.3.6.1.4.1.1751.2.18.6.7.1.38 | frAtmPvcVccTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |