OID reference
1.3.6.1.4.1.17713.6.10.8
When enabled, the transmit power of the local end is automatically adjusted to maintain a configurable target receive signal level at the remote end of the link. When set to Enable with initial estimate, the Slave estimates the optional transmit power before it responds to the Master.
Identification
{1 3 6 1 4 1 17713 6 10 8}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
| 2 | enabledwithinitialestimate |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.17713.6.10.8.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
automaticTxPowerControl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
enabledwithinitialestimate(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When enabled, the transmit power of the local end is
automatically adjusted to maintain a configurable target
receive signal level at the remote end of the link. When
set to Enable with initial estimate, the Slave estimates
the optional transmit power before it responds to the
Master."
::= { phyControl 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
When enabled, the transmit power of the local end is automatically adjusted to maintain a configurable target receive signal level at the remote end of the link. When set to Enable with initial estimate, the Slave estimates the optional transmit power before it responds to the Master.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: automaticTxPowerControl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"automaticTxPowerControl",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
",",
"enabledwithinitialestimate",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"When enabled, the transmit power of the local end is automatically adjusted to maintain a configurable target receive signal level at the remote end of the link. When set to Enable with initial estimate, the Slave estimates the optional transmit power before it responds to the Master.\"",
"::=",
"{",
"phyControl",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
],
[
"enabledwithinitialestimate",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When enabled, the transmit power of the local end is automatically adjusted to maintain a configurable target receive signal level at the remote end of the link. When set to Enable with initial estimate, the Slave estimates the optional transmit power before it responds to the Master."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAMBIUM-PTP600-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17713.6.10.1 | linkSymmetry | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.2 | linkModeOptimisation | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.3 | userConfiguredMaxModulationMode | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.4 | remoteMaximumTransmitPower | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.5 | txColorCode | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.6 | rxColorCode | 0 | 0 | |
| 1.3.6.1.4.1.17713.6.10.9 | remoteRxTargetPower | 0 | 0 |