| 1.3.6.1.4.1.1978.2.18.2.2.1.1 |
ifIndex | 0 | 0 |
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must rema… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.2 |
ifDescr | 0 | 0 |
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the produc… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.3 |
ifType | 0 | 0 |
iftype |
| 1.3.6.1.4.1.1978.2.18.2.2.1.4 |
ifMtu | 0 | 0 |
The size of the largest datagram which can be sent/received on the interface,
specified in octets. For interfaces that are used… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.5 |
ifSpeed | 0 | 0 |
An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.6 |
ifPhysAddress | 0 | 0 |
This information is required for configuration only when BOOTP support is enabled
in the TIGER configuration tool in order to pr… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.7 |
ifAdminStatus | 0 | 0 |
The desired state of the interface.
The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.8 |
ifOperStatus | 0 | 0 |
The current operational state of the interface.
testing - indicates that no operational packets can be passed.
up - normal… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.9 |
ifLastChange | 0 | 0 |
The value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.10 |
ifInOctets | 0 | 0 |
The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.11 |
ifInUcastPkts | 0 | 0 |
The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.12 |
ifInNUcastPkts | 0 | 0 |
The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast)
packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.13 |
ifInDiscards | 0 | 0 |
The number of inbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being d… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.14 |
ifInErrors | 0 | 0 |
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.15 |
ifInUnknownProtos | 0 | 0 |
The number of packets received via the interface which were discarded because
of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.16 |
ifOutOctets | 0 | 0 |
The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.17 |
ifOutUcastPkts | 0 | 0 |
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including thos… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.18 |
ifOutNUcastPkts | 0 | 0 |
The total number of packets that higher-level protocols requested be transmitted
to a non-unicast (i.e., a subnetwork-broadcast … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.19 |
ifOutDiscards | 0 | 0 |
The number of outbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.20 |
ifOutErrors | 0 | 0 |
The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.21 |
ifOutQLen | 0 | 0 |
The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1978.2.18.2.2.1.23 |
ifInMulticastPkts | 0 | 0 |
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a multicast address at this … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.24 |
ifInBroadcastPkts | 0 | 0 |
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a broadcast address at this … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.25 |
ifOutMulticastPkts | 0 | 0 |
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a multicast addres… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.26 |
ifOutBroadcastPkts | 0 | 0 |
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a broadcast addres… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.27 |
ifStateChangeTrapEnable | 0 | 0 |
Indicates whether ifStateChange traps should be generated for this interface.
By default, this object should have the value enab… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.28 |
ifConnectorPresent | 0 | 0 |
This object has the value 'true(1)' if the interface sublayer has a physical
connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.29 |
ifClearStats | 0 | 0 |
When set to 'clear' all of the interface statistics are cleared to zero.
It will also force a clearing of all protocol, and 'use… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.30 |
ifClearStatsTime | 0 | 0 |
The number of ticks when the Tiger last received a ifClearStats command. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.31 |
ifErrorRateTrapEnable | 0 | 0 |
Indicates whether ifErrorRate traps should be generated for this interface.
In addition to enabling the trap via this object, th… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.32 |
ifErrorRateInterval | 0 | 0 |
The amount of time over which any error rate is calculated. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.33 |
ifErrorInLowThreshold | 0 | 0 |
If the number of input errors drops below the low water mark (threshold)
over the interval defined by 'ifErrorRateInterval' then… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.34 |
ifErrorInHighThreshold | 0 | 0 |
ifErrorInHighthreshold |
| 1.3.6.1.4.1.1978.2.18.2.2.1.35 |
ifErrorOutLowThreshold | 0 | 0 |
If the number of output errors drops below the low water mark (threshold)
over the interval defined by 'ifErrorRateInterval' the… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.36 |
ifErrorOutHighThreshold | 0 | 0 |
ifErrorOutHighthreshold |
| 1.3.6.1.4.1.1978.2.18.2.2.1.37 |
ifErrType | 0 | 0 |
Informs the NMS of the reason for the ifErrorRate trap that was received.
When read asynchronously, it also indicates the last k… |