OID reference
1.3.6.1.4.1.1978.2.18.2.2.1.5
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
Identification
{1 3 6 1 4 1 1978 2 18 2 2 1 5}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SYS-MIB, the row index ifIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1978.2.18.2.2.1.5.<ifIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1978.2.18.2.2.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Historical records
ifSpeed OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no accurate
estimation can be made, this object should contain the nominal bandwidth."
::= { ifEntry 5 }
ifSpeed OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no accurate
estimation can be made, this object should contain the nominal bandwidth."
::= { ifEntry 5 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1978.2.18.2.2.1.1 | ifIndex | 0 | 0 | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must rema… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.2 | ifDescr | 0 | 0 | A textual string containing information about the interface. This string should include the name of the manufacturer, the produc… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.3 | ifType | 0 | 0 | iftype |
| 1.3.6.1.4.1.1978.2.18.2.2.1.4 | ifMtu | 0 | 0 | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.6 | ifPhysAddress | 0 | 0 | This information is required for configuration only when BOOTP support is enabled in the TIGER configuration tool in order to pr… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.7 | ifAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.8 | ifOperStatus | 0 | 0 | The current operational state of the interface. testing - indicates that no operational packets can be passed. up - normal… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.9 | ifLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.10 | ifInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.11 | ifInUcastPkts | 0 | 0 | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.12 | ifInNUcastPkts | 0 | 0 | The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.13 | ifInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being d… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.14 | ifInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.15 | ifInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.16 | ifOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.17 | ifOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including thos… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.18 | ifOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.19 | ifOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.20 | ifOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.21 | ifOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1978.2.18.2.2.1.22 | ifSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interf… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.23 | ifInMulticastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.24 | ifInBroadcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this … |
| 1.3.6.1.4.1.1978.2.18.2.2.1.25 | ifOutMulticastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast addres… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.26 | ifOutBroadcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast addres… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.27 | ifStateChangeTrapEnable | 0 | 0 | Indicates whether ifStateChange traps should be generated for this interface. By default, this object should have the value enab… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.28 | ifConnectorPresent | 0 | 0 | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.29 | ifClearStats | 0 | 0 | When set to 'clear' all of the interface statistics are cleared to zero. It will also force a clearing of all protocol, and 'use… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.30 | ifClearStatsTime | 0 | 0 | The number of ticks when the Tiger last received a ifClearStats command. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.31 | ifErrorRateTrapEnable | 0 | 0 | Indicates whether ifErrorRate traps should be generated for this interface. In addition to enabling the trap via this object, th… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.32 | ifErrorRateInterval | 0 | 0 | The amount of time over which any error rate is calculated. |
| 1.3.6.1.4.1.1978.2.18.2.2.1.33 | ifErrorInLowThreshold | 0 | 0 | If the number of input errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' then… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.34 | ifErrorInHighThreshold | 0 | 0 | ifErrorInHighthreshold |
| 1.3.6.1.4.1.1978.2.18.2.2.1.35 | ifErrorOutLowThreshold | 0 | 0 | If the number of output errors drops below the low water mark (threshold) over the interval defined by 'ifErrorRateInterval' the… |
| 1.3.6.1.4.1.1978.2.18.2.2.1.36 | ifErrorOutHighThreshold | 0 | 0 | ifErrorOutHighthreshold |
| 1.3.6.1.4.1.1978.2.18.2.2.1.37 | ifErrType | 0 | 0 | Informs the NMS of the reason for the ifErrorRate trap that was received. When read asynchronously, it also indicates the last k… |