Status in source: current.
Names: hwVOPINPDelayConfProfMinProtectionDs
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwVOPINPDelayConfProfMinProtectionDs",
"OBJECT-TYPE",
"SYNTAX",
"Xdsl2SymbolProtection",
"UNITS",
[
"literal",
"2273796d626f6c7322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take the values 1/2 and any integer from 0 to 16, inclusive. If the xTU does not support the configured INPMIN value,it shall use the nearest supported impulse noise protection greater than INPMIN. Unit: symbols. \"",
"REFERENCE",
"\"ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)\"",
"DEFVAL",
"{",
"noProtection",
"}",
"::=",
"{",
"hwVOPINPDelayConfProfEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"Xdsl2SymbolProtection"
],
[
"UNITS",
"symbols"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take the values 1/2 and any integer from 0 to 16, inclusive. If the xTU does not support the configured INPMIN value,it shall use the nearest supported impulse noise protection greater than INPMIN. Unit: symbols."
],
[
"REFERENCE",
"ITU-T G.997.1, paragraph #7.3.2.3 (INPMINds)"
],
null,
null,
[
"DEFVAL",
"noProtection"
]
]
}