Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwVOPINPDelayConfProfMaxDelayDs",
"OBJECT-TYPE",
"SYNTAX",
"Gauge32",
"(",
"0",
".",
".",
"63",
"|",
"255",
")",
"UNITS",
[
"literal",
"226d696c6c697365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"If retransmission is not used in downstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction. The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to, but less than or equal to hwVOPINPDelayConfProfMaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. The delay is coded in ms, with the special values 0, 1 and 255. - The value 0 indicates no delay bound is being imposed. - The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3 and G.992.4 operating modes (G.997.1 special value S1). - The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2). Unit: milliseconds. \"",
"REFERENCE",
"\"ITU-T G.997.1, paragraph #7.3.2.2 (Maximum interleaving delay)\"",
"::=",
"{",
"hwVOPINPDelayConfProfEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge32",
[
"integerSubType",
[
[
0,
63
],
[
255
]
]
]
],
[
"UNITS",
"milliseconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If retransmission is not used in downstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction. The xTUs shall choose the S (factor) and D(depth) values such that the actual one-way interleaving delay (Xdsl2ChStatusActDelay - VDSL2-LINE-MIB) is as close as possible to, but less than or equal to hwVOPINPDelayConfProfMaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. The delay is coded in ms, with the special values 0, 1 and 255. - The value 0 indicates no delay bound is being imposed. - The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3 and G.992.4 operating modes (G.997.1 special value S1). - The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2). Unit: milliseconds."
],
[
"REFERENCE",
"ITU-T G.997.1, paragraph #7.3.2.2 (Maximum interleaving delay)"
],
null,
null,
null
]
}