This object is used for getting the time of adding or creating a board.
Sources for this description
Huawei MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.2011.6.3.3.2.1.24
This object is used for getting the time of adding or creating a board.
Identification
{1 3 6 1 4 1 2011 6 3 3 2 1 24}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
hwSlotCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object is used for getting the time of adding or creating a board.
"
::= { hwSlotEntry 24 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is used for getting the time of adding or creating a board.
Huawei MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hwSlotCreateTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwSlotCreateTime",
"OBJECT-TYPE",
"SYNTAX",
"DateAndTime",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\" This object is used for getting the time of adding or creating a board. \"",
"::=",
"{",
"hwSlotEntry",
"24",
"}"
],
"syntax_tree": [
[
"row",
"DateAndTime"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used for getting the time of adding or creating a board."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Huawei support.
Module: HUAWEI-DEVICE-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'HCNUM-TC': ['CounterBasedGauge64'], 'SNMPv2-TC': ['DisplayString', 'DateAndTime', 'TruthValue', 'RowStatus'], 'ENTITY-MIB': ['entPhysicalIndex'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['TimeTicks', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter64', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'HUAWEI-TC-MIB': ['HWFrameType', 'HWPCBType', 'HWSubPCBType', 'HWPortType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: HUAWEI-DEVICE-MIB
{'IF-MIB': ['ifIndex'], 'HCNUM-TC': ['CounterBasedGauge64'], 'SNMPv2-TC': ['DisplayString', 'DateAndTime', 'TruthValue', 'RowStatus'], 'ENTITY-MIB': ['entPhysicalIndex'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['TimeTicks', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter64', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'HUAWEI-TC-MIB': ['HWFrameType', 'HWPCBType', 'HWSubPCBType', 'HWPortType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.3.3.2.1.1 | hwSlotIndex | 0 | 0 | Slot index,identity the physical position of a slot. If there is no board in the slot,the necessary information of the slot also … |
| 1.3.6.1.4.1.2011.6.3.3.2.1.2 | hwSlotType | 0 | 0 | Slot type,the slot type defined in HW-TC table is recommended. Note:when the slot is empty,the type must be <empty> |
| 1.3.6.1.4.1.2011.6.3.3.2.1.3 | hwSlotDesc | 0 | 0 | Slot information description,to describe extra information of the slot. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.4 | hwSlotPcbVersion | 0 | 0 | slot pcb version |
| 1.3.6.1.4.1.2011.6.3.3.2.1.5 | hwSlotVersion | 0 | 0 | Board version information |
| 1.3.6.1.4.1.2011.6.3.3.2.1.6 | hwSlotWorkMode | 0 | 0 | Board working mode,describe whether the board is working in main state or in standby state. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.7 | hwSubSlots | 0 | 0 | The number of the subslot can be attached in the board. The number is determined on the board's being been made. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.8 | hwSlotOperStatus | 0 | 0 | Operation status of the board. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.9 | hwSlotAdminStatus | 0 | 0 | Administration status of the board. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.10 | hwSlotRowStatus | 0 | 0 | Row status:mainly to support the offline configuration of board addition and deletion. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.11 | hwSlotPhySerialNum | 0 | 0 | The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually print… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.12 | hwSlotShutdownState | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.13 | hwSlotTemperature | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.14 | hwSlotUpdateVersion | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.15 | hwSlotAdminForceOOSTime | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.16 | hwSlotForceOOSTime | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.17 | hwSlotAdminForceOOSTimeoutWorkMode | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.18 | hwSlotEndServiceMode | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.19 | hwSlotCLEICode | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.20 | hwSlotNetworkRole | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.21 | hwSlotTypeName | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.22 | hwSlotPrimaryStatus | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.23 | hwSlotSecondaryStatus | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.25 | hwSlotPortNumWorkMode | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.26 | hwSlotExtendedBiosPassword | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.27 | hwSlotItemCode | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.28 | hwConfigBoardName | 0 | 0 | |
| 1.3.6.1.4.1.2011.6.3.3.2.1.29 | hwBasicBoardName | 0 | 0 |