OID reference

hwSlotWorkMode

1.3.6.1.4.1.2011.6.3.3.2.1.6

Description

Board working mode,describe whether the board is working in main state or in standby state.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2011.6.3.3.2.1 (hwSlotEntry)
Node code
6
Node name
hwSlotWorkMode
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2011.6.3.3.2.1.6
URN notation
urn:oid:1.3.6.1.4.1.2011.6.3.3.2.1.6
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2011 6 3 3 2 1 6}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwDev(3) hwSlotConf(3) hwSlotTable(2) hwSlotEntry(1) hwSlotWorkMode(6)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2011/6/3/3/2/1/6
  • /ISO/Identified-Organization/6/1/4/1/2011/6/3/3/2/1/6
  • /ISO/3/6/1/4/1/2011/6/3/3/2/1/6
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/enterprises/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/enterprises/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/identified-organization/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/enterprise/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/enterprise/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/enterprises/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/enterprises/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • /iso/org/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwDev/hwSlotConf/hwSlotTable/hwSlotEntry/hwSlotWorkMode
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write, read-only
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Huawei MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — MIBdepot, Circitor

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1main1, 2
2standby1, 2
3loadshare1
4nullbackup1
5voice1
6satop1
7pots1
8isdn1
9bonding1
10retransmission1
11nativetdm1
255other1, 2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In HUAWEI-DEVICE-MIB, the row index consists of these components in order:

  1. hwFrameIndex (INTEGER): one numeric subidentifier for the non-negative value.
  2. hwSlotIndex (INTEGER): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.2011.6.3.3.2.1.6.<hwFrameIndex>.<hwSlotIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.6.3.3.2.1.6

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

hwSlotWorkMode · current

hwSlotWorkMode OBJECT-TYPE
            SYNTAX INTEGER
                {
                main(1),
                standby(2),
                loadshare(3),
                nullbackup(4),
                voice(5),
                satop(6),
                pots(7),
                isdn(8),
                bonding(9),
                retransmission(10),
                nativetdm(11),
                other(255)
                }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "
                Board working mode that describes whether the board is
                working in main state or in standby with loadshare, nullbackup, voice, satop state.
                Options:
                1. main(1)                 - indicates that the active control board, supporting the get operation only
                2. standby(2)              - indicates that the standby control board, supporting the get operation only
                3. loadshare(3)            - indicates that the board working mode is load sharing
                4. nullbackup(4)           - indicates that the board working mode is backup
                5. voice(5)                - indicates to get and set the working mode of an EDT service board
                6. satop(6)                - indicates to get and set the working mode of an EDT service board or TOPB service board
                7. pots(7)                 - indicates to get and set the working mode of an VDM service board
                8. isdn(8)                 - indicates to get and set the working mode of an VDM service board
                9. bonding(9)              - indicates to get and set the working mode of an ADP service board
                10. retransmission(10)      - indicates to get and set the working mode of an ADP service board
                11. nativetdm(11)          - indicates to get and set the working mode of a TOPB service board
                12. other(255)             - indicates other working mode
                An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6).
                Setting the working mode of the EDT service board causes board resetting.
                An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8).
                Setting the working mode of the VDM service board causes board resetting.
                Setting the board working mode may cause board resetting.
                When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time.
                "
            ::= { hwSlotEntry 6 }

hwSlotWorkMode · current

hwSlotWorkMode OBJECT-TYPE
        SYNTAX INTEGER
            {
            main(1),
            standby(2),
            other(255)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "                
            Board working mode that describes whether the board is 
            working in main state or in standby state.
            "
        ::= { hwSlotEntry 6 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Board working mode,describe whether the board is
working in main state or in standby state.
Sources for this description

Circitor

Parsed from HUAWEI-DEVICE-MIB.mib · HUAWEI-DEVICE-MIB

Source file: Download huawei/HuaWei Quidview.rar — mibfiles/RM/mib/8070/HUAWEI-DEVICE-MIB.mib

Source data warning: This file is a member of a preserved third-party historical archive. Its edition and applicability to current devices are not confirmed; check the original file and package.

Source file: Download HUAWEI-DEVICE-MIB.mib

Browse all files from Circitor

Description 2


Board working mode,describe whether the board is
working in main state or in standby state.

µ¥°åµÄ¹¤×÷ģʽ£¬±íÃ÷µ±Ç°²ÛÖÐËù²åµ¥°åÊǹ¤×÷ÓÚÖ÷ÓÃ״̬£¬
»¹ÊDZ¸ÓÃ״̬¡£
Sources for this description

Description 3

Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time.

Sources for this description

Huawei MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 1 matching source record

Description 4

Board working mode that describes whether the board is working in main state or in standby state.

Sources for this description

MIBdepot

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3Huawei MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies1 record · 2 sources

Description 3

hwSlotWorkMode · currentHuawei MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies2 sources

Status in source: current.

Names: hwSlotWorkMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwSlotWorkMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "main",
    "(",
    "1",
    ")",
    ",",
    "standby",
    "(",
    "2",
    ")",
    ",",
    "loadshare",
    "(",
    "3",
    ")",
    ",",
    "nullbackup",
    "(",
    "4",
    ")",
    ",",
    "voice",
    "(",
    "5",
    ")",
    ",",
    "satop",
    "(",
    "6",
    ")",
    ",",
    "pots",
    "(",
    "7",
    ")",
    ",",
    "isdn",
    "(",
    "8",
    ")",
    ",",
    "bonding",
    "(",
    "9",
    ")",
    ",",
    "retransmission",
    "(",
    "10",
    ")",
    ",",
    "nativetdm",
    "(",
    "11",
    ")",
    ",",
    "other",
    "(",
    "255",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\" Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time. \"",
    "::=",
    "{",
    "hwSlotEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "main",
            1
          ],
          [
            "standby",
            2
          ],
          [
            "loadshare",
            3
          ],
          [
            "nullbackup",
            4
          ],
          [
            "voice",
            5
          ],
          [
            "satop",
            6
          ],
          [
            "pots",
            7
          ],
          [
            "isdn",
            8
          ],
          [
            "bonding",
            9
          ],
          [
            "retransmission",
            10
          ],
          [
            "nativetdm",
            11
          ],
          [
            "other",
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) - indicates that the active control board, supporting the get operation only 2. standby(2) - indicates that the standby control board, supporting the get operation only 3. loadshare(3) - indicates that the board working mode is load sharing 4. nullbackup(4) - indicates that the board working mode is backup 5. voice(5) - indicates to get and set the working mode of an EDT service board 6. satop(6) - indicates to get and set the working mode of an EDT service board or TOPB service board 7. pots(7) - indicates to get and set the working mode of an VDM service board 8. isdn(8) - indicates to get and set the working mode of an VDM service board 9. bonding(9) - indicates to get and set the working mode of an ADP service board 10. retransmission(10) - indicates to get and set the working mode of an ADP service board 11. nativetdm(11) - indicates to get and set the working mode of a TOPB service board 12. other(255) - indicates other working mode An EDT service board can be running either in voice mode, that is, voice(5), or in broadband mode, that is, satop(6). Setting the working mode of the EDT service board causes board resetting. An VDM service board can be running either in pots mode, that is, pots(7), or in isdn mode, that is, isdn(8). Setting the working mode of the VDM service board causes board resetting. Setting the board working mode may cause board resetting. When you are setting the working mode, you cannot set hwSlotAdminStatus or hwSlotRowStatus at the same time."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4MIBdepot1 record · 1 source

Description 4

hwSlotWorkMode · currentMIBdepot1 source

Status in source: current.

Names: hwSlotWorkMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwSlotWorkMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "main",
    "(",
    "1",
    ")",
    ",",
    "standby",
    "(",
    "2",
    ")",
    ",",
    "other",
    "(",
    "255",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\" Board working mode that describes whether the board is working in main state or in standby state. \"",
    "::=",
    "{",
    "hwSlotEntry",
    "6",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "main",
            1
          ],
          [
            "standby",
            2
          ],
          [
            "other",
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Board working mode that describes whether the board is working in main state or in standby state."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Preserved mibdepot archive

    Module: HUAWEI-DEVICE-MIB

    See published definition above

    Module imports
    {'SNMPv2-TC': ['DisplayString', 'DateAndTime', 'RowStatus'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['TimeTicks', 'IpAddress', 'Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'HUAWEI-TC-MIB': ['HWFrameType', 'HWPCBType', 'HWSubPCBType', 'HWPortType']}
    · Download huawei-device-mib.mib.txt

Historical records

Additional source information

Information from OID Repository
Vendor: HUAWEI Technology Co.,Ltd
Module: HUAWEI-DEVICE-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot
hwSlotWorkMode OBJECT-TYPE
            SYNTAX INTEGER
                {
                main(1),
                standby(2),
                other(255)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "				
                Board working mode,describe whether the board is 
                working in main state or in standby state.
                
                µ¥°åµÄ¹¤×÷ģʽ£¬±íÃ÷µ±Ç°²ÛÖÐËù²åµ¥°åÊǹ¤×÷ÓÚÖ÷ÓÃ״̬£¬
                »¹ÊDZ¸ÓÃ״̬¡£"
            ::= { hwSlotEntry 6 }
Information from Circitor
hwSlotWorkMode OBJECT-TYPE
			SYNTAX INTEGER
				{
				main(1),
				standby(2),
				other(255)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"Board working mode,describe whether the board is 
				working in main state or in standby state."
			::= { hwSlotEntry 6 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2011)

Lwu Zhao

Siblings (28)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.6.3.3.2.1.1 hwSlotIndex00 Slot index,identity the physical position of a slot.
If there is no board in the slot,the necessary
information of the slot also …
1.3.6.1.4.1.2011.6.3.3.2.1.2 hwSlotType00 Slot type,the slot type defined in HW-TC table is recommended. Note:when the slot is empty,the type must be <empty>
1.3.6.1.4.1.2011.6.3.3.2.1.3 hwSlotDesc00 Slot information description,to describe extra information of the slot.
1.3.6.1.4.1.2011.6.3.3.2.1.4 hwSlotPcbVersion00 slot pcb version
1.3.6.1.4.1.2011.6.3.3.2.1.5 hwSlotVersion00 Board version information
1.3.6.1.4.1.2011.6.3.3.2.1.7 hwSubSlots00 The number of the subslot can be attached in the board.
The number is determined on the board's being been made.
1.3.6.1.4.1.2011.6.3.3.2.1.8 hwSlotOperStatus00 Operation status of the board.
1.3.6.1.4.1.2011.6.3.3.2.1.9 hwSlotAdminStatus00 Administration status of the board.
1.3.6.1.4.1.2011.6.3.3.2.1.10 hwSlotRowStatus00 Row status:mainly to support the offline
configuration of board addition and deletion.
1.3.6.1.4.1.2011.6.3.3.2.1.11 hwSlotPhySerialNum00 The vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually print…
1.3.6.1.4.1.2011.6.3.3.2.1.12 hwSlotShutdownState00
1.3.6.1.4.1.2011.6.3.3.2.1.13 hwSlotTemperature00
1.3.6.1.4.1.2011.6.3.3.2.1.14 hwSlotUpdateVersion00
1.3.6.1.4.1.2011.6.3.3.2.1.15 hwSlotAdminForceOOSTime00
1.3.6.1.4.1.2011.6.3.3.2.1.16 hwSlotForceOOSTime00
1.3.6.1.4.1.2011.6.3.3.2.1.17 hwSlotAdminForceOOSTimeoutWorkMode00
1.3.6.1.4.1.2011.6.3.3.2.1.18 hwSlotEndServiceMode00
1.3.6.1.4.1.2011.6.3.3.2.1.19 hwSlotCLEICode00
1.3.6.1.4.1.2011.6.3.3.2.1.20 hwSlotNetworkRole00
1.3.6.1.4.1.2011.6.3.3.2.1.21 hwSlotTypeName00
1.3.6.1.4.1.2011.6.3.3.2.1.22 hwSlotPrimaryStatus00
1.3.6.1.4.1.2011.6.3.3.2.1.23 hwSlotSecondaryStatus00
1.3.6.1.4.1.2011.6.3.3.2.1.24 hwSlotCreateTime00
1.3.6.1.4.1.2011.6.3.3.2.1.25 hwSlotPortNumWorkMode00
1.3.6.1.4.1.2011.6.3.3.2.1.26 hwSlotExtendedBiosPassword00
1.3.6.1.4.1.2011.6.3.3.2.1.27 hwSlotItemCode00
1.3.6.1.4.1.2011.6.3.3.2.1.28 hwConfigBoardName00
1.3.6.1.4.1.2011.6.3.3.2.1.29 hwBasicBoardName00