This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
switchBridgeStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]
Parsed from file swbridge.mib.txt
Company: None
Module: SWITCH-BRIDGE-MIB
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
switchBridgeStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]
Parsed from file SWITCH-BRIDGE-MIB.mib
Module: SWITCH-BRIDGE-MIB
Vendor: Allied Telesis, Inc.
Module: SWITCH-BRIDGE-MIB
[Automatically extracted from oidview.com]
switchBridgeStpForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to switchBridgeStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { switchBridgeStpEntry 11 }
switchBridgeStpForwardDelay OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to switchBridgeStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { switchBridgeStpEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.1 | switchBridgeStpProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.2 | switchBridgeStpPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.3 | switchBridgeStpTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.4 | switchBridgeStpTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.5 | switchBridgeStpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.6 | switchBridgeStpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.7 | switchBridgeStpRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.8 | switchBridgeStpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.9 | switchBridgeStpHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.10 | switchBridgeStpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.12 | switchBridgeStpBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.13 | switchBridgeStpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.14 | switchBridgeStpBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |