The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.
Parsed from file swbridge.mib.txt
Company: None
Module: SWITCH-BRIDGE-MIB
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.
Parsed from file SWITCH-BRIDGE-MIB.mib
Module: SWITCH-BRIDGE-MIB
Vendor: Allied Telesis, Inc.
Module: SWITCH-BRIDGE-MIB
[Automatically extracted from oidview.com]
switchBridgeStpHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { switchBridgeStpEntry 9 }
switchBridgeStpHelloTime OBJECT-TYPE SYNTAX Timeout MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { switchBridgeStpEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.1 | switchBridgeStpProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.2 | switchBridgeStpPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.3 | switchBridgeStpTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.4 | switchBridgeStpTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.5 | switchBridgeStpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.6 | switchBridgeStpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.7 | switchBridgeStpRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.8 | switchBridgeStpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.10 | switchBridgeStpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.11 | switchBridgeStpForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.12 | switchBridgeStpBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.13 | switchBridgeStpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
1.3.6.1.4.1.207.8.9.2.2.5.2.1.1.14 | switchBridgeStpBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |