smt OBJECT IDENTIFIER ::= { dot11ExtGenObjs 1 }
Vendor: Compaq
Module: WL400-DOT11EXT-MIB (dot11exc.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.2.1.1 | smtAssociationID | 1 | 1 | The Association ID of an association between an Access Point and a Station. The size constraint is taken from IEEE 802.11 section… |
| 1.3.6.1.4.1.232.145.1.2.1.2 | smtCapabilityInfo | 1 | 1 | The Capability Information of this entity. |
| 1.3.6.1.4.1.232.145.1.2.1.3 | smtPowerSaveInterval | 1 | 1 | The time limit, in units of beacon intervals, after which the Client will go into Power Save Mode if the Client does not detect a… |
| 1.3.6.1.4.1.232.145.1.2.1.4 | smtListenInterval | 1 | 1 | The time, in units of beacon intervals, that may pass before the Client awakens and listens for the next Beacon. For an Access Po… |
| 1.3.6.1.4.1.232.145.1.2.1.5 | smtATIMWindow | 1 | 1 | The duration of the ATIM Window, in TUs. For an Access Point, this object is always zero. |
| 1.3.6.1.4.1.232.145.1.2.1.6 | smtOperationalChannels | 1 | 1 | The list of DS channels that shall be scanned with a higher priority. All channels allowed by the current regulatory domain are s… |
| 1.3.6.1.4.1.232.145.1.2.1.7 | smtCurrentBSSID | 1 | 1 | The current Basic Service Set ID. For a Client, this object either contains the BSSID of the Access Point with which the Client i… |
| 1.3.6.1.4.1.232.145.1.2.1.8 | smtCurrentSSID | 1 | 1 | The current Service Set ID. For a Client, this object either contains the SSID of the infrastructure network or the SSID of the I… |
| 1.3.6.1.4.1.232.145.1.2.1.9 | smtCurrentBSSType | 1 | 1 | The type of the Basic Service Set. For a Client, this object indicates the type of SS it currently is associated with, participat… |
| 1.3.6.1.4.1.232.145.1.2.1.10 | smtPublicKeyEnable | 1 | 1 | This object specifies whether public-key techniques shall be used to negotiate keys. |
| 1.3.6.1.4.1.232.145.1.2.1.11 | smtQualityLevel0 | 1 | 1 | This object relates quality level to a transmission rate. Level 0 specifies the lowest (basic) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.12 | smtQualityLevel1 | 1 | 1 | This object relates quality level to a transmission rate. Level 1 specifies the second lowest (basic) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.13 | smtQualityLevel2 | 1 | 1 | This object relates quality level to a transmission rate. Level 2 specifies the an arbitrary (higher) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.14 | smtQualityPenalty | 1 | 1 | This object specifies a quality penalty for transmission failures. |
| 1.3.6.1.4.1.232.145.1.2.1.15 | smtStationDBTimeout | 1 | 1 | This object specifies a timeout on entries and their state information in the Station database. For Clients the Station database … |
| 1.3.6.1.4.1.232.145.1.2.1.16 | smtQualityIndicator | 1 | 1 | This object selects the quality indicator from the baseband. Current quality indicators are: 1 = Signal Quality 1 (SQ1) 2 = Signal… |
| 1.3.6.1.4.1.232.145.1.2.1.17 | smtQualityUpperLimit | 1 | 1 | An upper limit for the quality. |
| 1.3.6.1.4.1.232.145.1.2.1.18 | smtQualityLowerLimit | 1 | 1 | A lower limit for the quality. |
| 1.3.6.1.4.1.232.145.1.2.1.19 | smtOEMCapabilityInformation | 1 | 1 | The OEM Capability Information. |
| 1.3.6.1.4.1.232.145.1.2.1.20 | smtCWMin | 1 | 1 | The CWMin value as defined by IEEE 802.11. Needs to be a power of 2, minus 1. |
| 1.3.6.1.4.1.232.145.1.2.1.21 | smtCWMax | 1 | 1 | The CWMax value as defined by IEEE 802.11. Needs to be a power of 2, minus 1, larger than or equal to smtCWMin. |
| 1.3.6.1.4.1.232.145.1.2.1.22 | smtACKWindow | 1 | 1 | The ACK frame time out defined in number of slottimes. This can be used to optimize long range links. |