The current Basic Service Set ID. For a Client, this object
either contains the BSSID of the Access Point with which the
Client is associated or the BSSID of the IBSS it is currently
participating in (smtCurrentBSSType indicates which of the two
cases holds). If the object is all zeros, the Client is not
associated or participating in an IBSS. For an Access Point,
this object contains the BSSID of the Access Point. If the
Access Point is in the process of resetting, the object is all
zeros.
Parsed from file dot11exc.mib.txt
Company: compaq
Module: WL400-DOT11EXT-MIB
smtCurrentBSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The current Basic Service Set ID. For a Client, this object either contains the BSSID of the Access Point with which the Client is associated or the BSSID of the IBSS it is currently participating in (smtCurrentBSSType indicates which of the two cases holds). If the object is all zeros, the Client is not associated or participating in an IBSS. For an Access Point, this object contains the BSSID of the Access Point. If the Access Point is in the process of resetting, the object is all zeros." REFERENCE "IEEE 802.11, paragraph 7.1.3.3.3" ::= { smt 7 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.2.1.7.0 | smtCurrentBSSID | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.2.1.1 | smtAssociationID | 1 | 1 | The Association ID of an association between an Access Point and a Station. The size constraint is taken from IEEE 802.11 section… |
| 1.3.6.1.4.1.232.145.1.2.1.2 | smtCapabilityInfo | 1 | 1 | The Capability Information of this entity. |
| 1.3.6.1.4.1.232.145.1.2.1.3 | smtPowerSaveInterval | 1 | 1 | The time limit, in units of beacon intervals, after which the Client will go into Power Save Mode if the Client does not detect a… |
| 1.3.6.1.4.1.232.145.1.2.1.4 | smtListenInterval | 1 | 1 | The time, in units of beacon intervals, that may pass before the Client awakens and listens for the next Beacon. For an Access Po… |
| 1.3.6.1.4.1.232.145.1.2.1.5 | smtATIMWindow | 1 | 1 | The duration of the ATIM Window, in TUs. For an Access Point, this object is always zero. |
| 1.3.6.1.4.1.232.145.1.2.1.6 | smtOperationalChannels | 1 | 1 | The list of DS channels that shall be scanned with a higher priority. All channels allowed by the current regulatory domain are s… |
| 1.3.6.1.4.1.232.145.1.2.1.8 | smtCurrentSSID | 1 | 1 | The current Service Set ID. For a Client, this object either contains the SSID of the infrastructure network or the SSID of the I… |
| 1.3.6.1.4.1.232.145.1.2.1.9 | smtCurrentBSSType | 1 | 1 | The type of the Basic Service Set. For a Client, this object indicates the type of SS it currently is associated with, participat… |
| 1.3.6.1.4.1.232.145.1.2.1.10 | smtPublicKeyEnable | 1 | 1 | This object specifies whether public-key techniques shall be used to negotiate keys. |
| 1.3.6.1.4.1.232.145.1.2.1.11 | smtQualityLevel0 | 1 | 1 | This object relates quality level to a transmission rate. Level 0 specifies the lowest (basic) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.12 | smtQualityLevel1 | 1 | 1 | This object relates quality level to a transmission rate. Level 1 specifies the second lowest (basic) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.13 | smtQualityLevel2 | 1 | 1 | This object relates quality level to a transmission rate. Level 2 specifies the an arbitrary (higher) rate. |
| 1.3.6.1.4.1.232.145.1.2.1.14 | smtQualityPenalty | 1 | 1 | This object specifies a quality penalty for transmission failures. |
| 1.3.6.1.4.1.232.145.1.2.1.15 | smtStationDBTimeout | 1 | 1 | This object specifies a timeout on entries and their state information in the Station database. For Clients the Station database … |
| 1.3.6.1.4.1.232.145.1.2.1.16 | smtQualityIndicator | 1 | 1 | This object selects the quality indicator from the baseband. Current quality indicators are: 1 = Signal Quality 1 (SQ1) 2 = Signal… |
| 1.3.6.1.4.1.232.145.1.2.1.17 | smtQualityUpperLimit | 1 | 1 | An upper limit for the quality. |
| 1.3.6.1.4.1.232.145.1.2.1.18 | smtQualityLowerLimit | 1 | 1 | A lower limit for the quality. |
| 1.3.6.1.4.1.232.145.1.2.1.19 | smtOEMCapabilityInformation | 1 | 1 | The OEM Capability Information. |
| 1.3.6.1.4.1.232.145.1.2.1.20 | smtCWMin | 1 | 1 | The CWMin value as defined by IEEE 802.11. Needs to be a power of 2, minus 1. |
| 1.3.6.1.4.1.232.145.1.2.1.21 | smtCWMax | 1 | 1 | The CWMax value as defined by IEEE 802.11. Needs to be a power of 2, minus 1, larger than or equal to smtCWMin. |
| 1.3.6.1.4.1.232.145.1.2.1.22 | smtACKWindow | 1 | 1 | The ACK frame time out defined in number of slottimes. This can be used to optimize long range links. |