Compaq SCSI Controller Time-outs.
This is the number of times, since the driver was loaded, that
the SCSI Hardware Interface driver issued a SCSI command but
did not receive a reply within a specified amount of time.
Timeouts may occasionally occur when a device fails to process a
request because the SCSI bus was busy. If this value should rise
dramatically, you may have a problem. Check if you have any
non-disk SCSI devices, like tape drives, on the SCSI bus with
the drives. Sometimes a non-disk device can hold the SCSI bus
for long periods of time causing time-outs.
Parsed from file CPQSCSI1.MIB.txt
Company: None
Module: CPQSCSI-MIB
SCSI Controller Time-outs.
This is the number of times, since the driver was loaded, that
the SCSI Hardware Interface driver issued a SCSI command but
did not receive a reply within a specified amount of time.
Timeouts may occasionally occur when a device fails to process a
request because the SCSI bus was busy. If this value should rise
dramatically, you may have a problem. Check if you have any
non-disk SCSI devices, like tape drives, on the SCSI bus with
the drives. Sometimes a non-disk device can hold the SCSI bus
for long periods of time causing time-outs.
Parsed from file CPQSCSI-MIB.mib
Module: CPQSCSI-MIB
cpqScsiCntlrTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Controller Time-outs. This is the number of times, since the driver was loaded, that the SCSI Hardware Interface driver issued a SCSI command but did not receive a reply within a specified amount of time. Timeouts may occasionally occur when a device fails to process a request because the SCSI bus was busy. If this value should rise dramatically, you may have a problem. Check if you have any non-disk SCSI devices, like tape drives, on the SCSI bus with the drives. Sometimes a non-disk device can hold the SCSI bus for long periods of time causing time-outs." ::= { cpqScsiCntlrEntry 10 }
Vendor: Compaq
Module: CPQSCSI-MIB
[Automatically extracted from oidview.com]
cpqScsiCntlrTimeouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Controller Time-outs. This is the number of times, since the driver was loaded, that the SCSI Hardware Interface driver issued a SCSI command but did not receive a reply within a specified amount of time. Timeouts may occasionally occur when a device fails to process a request because the SCSI bus was busy. If this value should rise dramatically, you may have a problem. Check if you have any non-disk SCSI devices, like tape drives, on the SCSI bus with the drives. Sometimes a non-disk device can hold the SCSI bus for long periods of time causing time-outs." ::= { cpqScsiCntlrEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.5.2.2.1.1.1 | cpqScsiCntlrIndex | 0 | 0 | SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller in… |
| 1.3.6.1.4.1.232.5.2.2.1.1.2 | cpqScsiCntlrBusIndex | 0 | 0 | SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at… |
| 1.3.6.1.4.1.232.5.2.2.1.1.3 | cpqScsiCntlrModel | 0 | 0 | Compaq SCSI Controller Model. The is the controller's model and can be used for identification purposes. The following values ar… |
| 1.3.6.1.4.1.232.5.2.2.1.1.4 | cpqScsiCntlrFWVers | 0 | 0 | SCSI Controller Firmware Version. This is the version of the firmware on the SCSI controller. If the SCSI controller does not use… |
| 1.3.6.1.4.1.232.5.2.2.1.1.5 | cpqScsiCntlrSWVers | 0 | 0 | SCSI Controller Software Version. This is the version of any software upgrade which is being used in place of the firmware with t… |
| 1.3.6.1.4.1.232.5.2.2.1.1.6 | cpqScsiCntlrSlot | 0 | 0 | SCSI Controller Slot. This is the physical slot in which this controller is installed. This information can be used for identifi… |
| 1.3.6.1.4.1.232.5.2.2.1.1.7 | cpqScsiCntlrStatus | 0 | 0 | SCSI Controller Status. This is the current status of the controller. The following values are currently defined: other(1) The cont… |
| 1.3.6.1.4.1.232.5.2.2.1.1.8 | cpqScsiCntlrHardResets | 0 | 0 | SCSI Controller Hard Resets. This is the number of times the SCSI Hardware Interface driver detected that the SCSI bus has been r… |
| 1.3.6.1.4.1.232.5.2.2.1.1.9 | cpqScsiCntlrSoftResets | 0 | 0 | SCSI Controller Soft Resets. This is the number of times the SCSI Hardware Interface driver has issued a reset command to all dev… |
| 1.3.6.1.4.1.232.5.2.2.1.1.11 | cpqScsiCntlrBaseIOAddr | 0 | 0 | SCSI Controller Base I/O Address. This is the I/O address that the SCSI Hardware Interface driver uses to communicate with the SC… |
| 1.3.6.1.4.1.232.5.2.2.1.1.12 | cpqScsiCntlrCondition | 0 | 0 | SCSI Controller Condition. This is the overall condition of the controller and all of the logical drives and physical drives cont… |
| 1.3.6.1.4.1.232.5.2.2.1.1.13 | cpqScsiCntlrSerialNum | 0 | 0 | SCSI Controller Serial Number. This is the serial number assigned to the controller. This can be used for identification purpose… |
| 1.3.6.1.4.1.232.5.2.2.1.1.14 | cpqScsiCntlrBusWidth | 0 | 0 | SCSI Controller Data Bus Width. This is the physical width of the controller's SCSI data bus. other(1) The management agent does n… |
| 1.3.6.1.4.1.232.5.2.2.1.1.15 | cpqScsiCntlrModelExtended | 0 | 0 | SCSI Controller Model Name. This is the model name for SCSI controllers not defined by cpqScsiCntlrModel enumerations. This field… |
| 1.3.6.1.4.1.232.5.2.2.1.1.16 | cpqScsiCntlrHwLocation | 0 | 0 | A text description of the hardware location, on complex multi SBB hardware only, for the SCSI controller. A NULL string indicates… |