Compaq SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card.
Parsed from file CPQSCSI1.MIB.txt
Company: None
Module: CPQSCSI-MIB
SCSI Bus Index.
The bus index indicates to which SCSI bus instance on an
adapter this table entry belongs. The instances start
at one and increment for each SCSI bus on a card.
Parsed from file CPQSCSI-MIB.mib
Module: CPQSCSI-MIB
cpqScsiCntlrBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiCntlrEntry 2 }
Vendor: Compaq
Module: CPQSCSI-MIB
[Automatically extracted from oidview.com]
cpqScsiCntlrBusIndex OBJECT-TYPE SYNTAX INTEGER (0..225) ACCESS read-only STATUS mandatory DESCRIPTION "SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card." ::= { cpqScsiCntlrEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.5.2.2.1.1.1 | cpqScsiCntlrIndex | 0 | 0 | SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller in… |
| 1.3.6.1.4.1.232.5.2.2.1.1.3 | cpqScsiCntlrModel | 0 | 0 | Compaq SCSI Controller Model. The is the controller's model and can be used for identification purposes. The following values ar… |
| 1.3.6.1.4.1.232.5.2.2.1.1.4 | cpqScsiCntlrFWVers | 0 | 0 | SCSI Controller Firmware Version. This is the version of the firmware on the SCSI controller. If the SCSI controller does not use… |
| 1.3.6.1.4.1.232.5.2.2.1.1.5 | cpqScsiCntlrSWVers | 0 | 0 | SCSI Controller Software Version. This is the version of any software upgrade which is being used in place of the firmware with t… |
| 1.3.6.1.4.1.232.5.2.2.1.1.6 | cpqScsiCntlrSlot | 0 | 0 | SCSI Controller Slot. This is the physical slot in which this controller is installed. This information can be used for identifi… |
| 1.3.6.1.4.1.232.5.2.2.1.1.7 | cpqScsiCntlrStatus | 0 | 0 | SCSI Controller Status. This is the current status of the controller. The following values are currently defined: other(1) The cont… |
| 1.3.6.1.4.1.232.5.2.2.1.1.8 | cpqScsiCntlrHardResets | 0 | 0 | SCSI Controller Hard Resets. This is the number of times the SCSI Hardware Interface driver detected that the SCSI bus has been r… |
| 1.3.6.1.4.1.232.5.2.2.1.1.9 | cpqScsiCntlrSoftResets | 0 | 0 | SCSI Controller Soft Resets. This is the number of times the SCSI Hardware Interface driver has issued a reset command to all dev… |
| 1.3.6.1.4.1.232.5.2.2.1.1.10 | cpqScsiCntlrTimeouts | 0 | 0 | SCSI Controller Time-outs. This is the number of times, since the driver was loaded, that the SCSI Hardware Interface driver issu… |
| 1.3.6.1.4.1.232.5.2.2.1.1.11 | cpqScsiCntlrBaseIOAddr | 0 | 0 | SCSI Controller Base I/O Address. This is the I/O address that the SCSI Hardware Interface driver uses to communicate with the SC… |
| 1.3.6.1.4.1.232.5.2.2.1.1.12 | cpqScsiCntlrCondition | 0 | 0 | SCSI Controller Condition. This is the overall condition of the controller and all of the logical drives and physical drives cont… |
| 1.3.6.1.4.1.232.5.2.2.1.1.13 | cpqScsiCntlrSerialNum | 0 | 0 | SCSI Controller Serial Number. This is the serial number assigned to the controller. This can be used for identification purpose… |
| 1.3.6.1.4.1.232.5.2.2.1.1.14 | cpqScsiCntlrBusWidth | 0 | 0 | SCSI Controller Data Bus Width. This is the physical width of the controller's SCSI data bus. other(1) The management agent does n… |
| 1.3.6.1.4.1.232.5.2.2.1.1.15 | cpqScsiCntlrModelExtended | 0 | 0 | SCSI Controller Model Name. This is the model name for SCSI controllers not defined by cpqScsiCntlrModel enumerations. This field… |
| 1.3.6.1.4.1.232.5.2.2.1.1.16 | cpqScsiCntlrHwLocation | 0 | 0 | A text description of the hardware location, on complex multi SBB hardware only, for the SCSI controller. A NULL string indicates… |