An entry in the superStackHubTable.
Parsed from file startek.mib.txt
Company: None
Module: STARTEK-PRIVATE-MIB
An entry in the superStackHubTable.
Parsed from file STARTEK-PRIVATE-MIB.mib
Module: STARTEK-PRIVATE-MIB
Vendor: 3Com
Module: STARTEK-PRIVATE-MIB (startek.mib)
Type: ENTRY
Access: not-accessible
Syntax: SuperStackHubTableEntry
Automatically extracted from www.mibdepot.com
superStackHubTableEntry OBJECT-TYPE SYNTAX SuperStackHubTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the superStackHubTable." INDEX { superStackHubTableIndex } ::= { superStackHubTable 1 }
superStackHubTableEntry OBJECT-TYPE SYNTAX SuperStackHubTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the superStackHubTable." INDEX { superStackHubTableIndex } ::= { superStackHubTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.260.1.3.2.2.1.1 | superStackHubTableIndex | 0 | 0 | The index for this hub entry |
| 1.3.6.1.4.1.260.1.3.2.2.1.2 | superStackHubModel | 0 | 0 | The model number of the superStack series hub being managed. |
| 1.3.6.1.4.1.260.1.3.2.2.1.3 | superStackHub485Address | 0 | 0 | The 6 hex digit address used on the RS485 serial OOB management channel. |
| 1.3.6.1.4.1.260.1.3.2.2.1.4 | superStackHubStackPosition | 0 | 0 | The integer position in a stack of units. The top position is 1. |
| 1.3.6.1.4.1.260.1.3.2.2.1.5 | superStackRiConfiguration | 0 | 0 | This parameter describes the physical configured state of Ring In. Ring In is disabled if there is another Ring In within the ca… |
| 1.3.6.1.4.1.260.1.3.2.2.1.6 | superStackHubRiFTolState | 0 | 0 | This parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the correspon… |
| 1.3.6.1.4.1.260.1.3.2.2.1.7 | superStackHubRiMask | 0 | 0 | Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this por… |
| 1.3.6.1.4.1.260.1.3.2.2.1.8 | superStackHubRiPhDet | 0 | 0 | This parameter describes the phantom detect status for this Ring In port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.9 | superStackHubRiNsrtStatus | 0 | 0 | Insertion status for this Ring In port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.10 | superStackHubRiBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic bea… |
| 1.3.6.1.4.1.260.1.3.2.2.1.11 | superStackRoConfiguration | 0 | 0 | This parameter describes the physical configured state of Ring Out. Ring Out is disabled if there is another Ring Out within the… |
| 1.3.6.1.4.1.260.1.3.2.2.1.12 | superStackHubRoFTolState | 0 | 0 | This parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the correspon… |
| 1.3.6.1.4.1.260.1.3.2.2.1.13 | superStackHubRoMask | 0 | 0 | Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this po… |
| 1.3.6.1.4.1.260.1.3.2.2.1.14 | superStackHubRoPhDet | 0 | 0 | This parameter describes the phantom detect status for this Ring Out port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.15 | superStackHubRoNsrtStatus | 0 | 0 | Insertion status for this Ring Out port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.16 | superStackHubRoBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic bea… |
| 1.3.6.1.4.1.260.1.3.2.2.1.17 | superStackHubCascadeUpMask | 0 | 0 | Administrative status for this Cascade Up connection. By setting this parameter, a remote manager can control the partitioning of… |
| 1.3.6.1.4.1.260.1.3.2.2.1.18 | superStackHubCascadeUpPhDet | 0 | 0 | This parameter describes the phantom detect status for this Cascade Up connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.19 | superStackHubCascadeUpNsrtStatus | 0 | 0 | Insertion status for this Cascade Up connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.20 | superStackHubCascadeUpBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.21 | superStackHubCascadeDownMask | 0 | 0 | Administrative status for this Cascade Down connection. By setting this parameter, a remote manager can control the partitioning … |
| 1.3.6.1.4.1.260.1.3.2.2.1.22 | superStackHubCascadeDownPhDet | 0 | 0 | This parameter describes the phantom detect status for this Cascade Down connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.23 | superStackHubCascadeDownNsrtStatus | 0 | 0 | Insertion status for this Cascade Down connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.24 | superStackHubCascadeDownBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.25 | superStackHubDataRateState | 0 | 0 | This parameter indicates the current data rate of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.26 | superStackHubDeviceTimeStamp | 0 | 0 | The time the data rate status (was) last changed. |
| 1.3.6.1.4.1.260.1.3.2.2.1.27 | superStackHubMgmtStatus | 0 | 0 | The operational status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.28 | superStackHubProxyAgentID | 0 | 0 | The physical layer MAC Address of the agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.29 | superStackHubAttachedAgentType | 0 | 0 | The type of the attached agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.30 | superStackHubAttachedAgentState | 0 | 0 | The state of the attached agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.31 | superStackHubAttachedAgentControl | 0 | 0 | This parameter allows control of the agent. Disabling the agent causes it to stop communicating (via the cascade) with other de… |
| 1.3.6.1.4.1.260.1.3.2.2.1.32 | superStackHubTemperatureStatus | 0 | 0 | The temperature status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.33 | superStackHubPowerStatus | 0 | 0 | The power status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.34 | superStackHubAutoRecovControl | 0 | 0 | This parameter controls the auto recovery operation of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.35 | superStackHubAutoRecovRetries | 0 | 0 | The number of Auto Recoveries performed by this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.36 | superStackHubCodeVersion | 0 | 0 | The firmware version number of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.37 | superStackHubAutoRecovState | 0 | 0 | The current auto recovery state of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.38 | superStackHubRawCommandData | 0 | 0 | This is used to send raw 485 serial data to this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.39 | superStackHubAutoRecovMode | 0 | 0 | This parameter describes the auto recovery mode. |
| 1.3.6.1.4.1.260.1.3.2.2.1.40 | superStackHubRouterPortPhDet | 0 | 0 | Phantom current status for the router port on rear. A value of 1 corresponds to no phantom current detected. A value of 2 corresp… |
| 1.3.6.1.4.1.260.1.3.2.2.1.41 | superStackHubRouterPortMask | 0 | 0 | Administrative status for the router port on rear. By setting this parameter, a remote manager can control access to the lobe por… |
| 1.3.6.1.4.1.260.1.3.2.2.1.42 | superStackHubRouterPortNsrtStatus | 0 | 0 | Actual insertion status for the router port on rear. A 1 value means that the corresponding station is not connected to the ring.… |
| 1.3.6.1.4.1.260.1.3.2.2.1.43 | superStackHubRouterPortMacAddr | 0 | 0 | The MAC layer address of the station which is attached to the router port on rear. |
| 1.3.6.1.4.1.260.1.3.2.2.1.44 | superStackHubRouterPortBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on the router port. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.45 | superStackHubRouterPortBcnRemCause | 0 | 0 | This parameter describes the cause of any automatic beacon removal operations performed by the agent on this port. |