This parameter allows control of the agent. Disabling the agent
causes it to stop communicating (via the cascade) with other devices
but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion
commands cause the agents MAC to be inserted or looped back respectively.
this unit.
Parsed from file startek.mib.txt
Company: None
Module: STARTEK-PRIVATE-MIB
This parameter allows control of the agent. Disabling the agent
causes it to stop communicating (via the cascade) with other devices
but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion
commands cause the agents MAC to be inserted or looped back respectively.
this unit.
Parsed from file STARTEK-PRIVATE-MIB.mib
Module: STARTEK-PRIVATE-MIB
Vendor: 3Com
Module: STARTEK-PRIVATE-MIB (startek.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
superStackHubAttachedAgentControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), enable-MAC-insertion(3), isolate-MAC-insertion(4), read-value(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows control of the agent. Disabling the agent causes it to stop communicating (via the cascade) with other devices but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion commands cause the agents MAC to be inserted or looped back respectively. this unit." ::= { superStackHubTableEntry 31 }
superStackHubAttachedAgentControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), enable-MAC-insertion(3), isolate-MAC-insertion(4), read-value(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter allows control of the agent. Disabling the agent causes it to stop communicating (via the cascade) with other devices but it still allows for insertion of the MAC. The enable/isolate-MAC-insertion commands cause the agents MAC to be inserted or looped back respectively. this unit." ::= { superStackHubTableEntry 31 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.260.1.3.2.2.1.1 | superStackHubTableIndex | 0 | 0 | The index for this hub entry |
| 1.3.6.1.4.1.260.1.3.2.2.1.2 | superStackHubModel | 0 | 0 | The model number of the superStack series hub being managed. |
| 1.3.6.1.4.1.260.1.3.2.2.1.3 | superStackHub485Address | 0 | 0 | The 6 hex digit address used on the RS485 serial OOB management channel. |
| 1.3.6.1.4.1.260.1.3.2.2.1.4 | superStackHubStackPosition | 0 | 0 | The integer position in a stack of units. The top position is 1. |
| 1.3.6.1.4.1.260.1.3.2.2.1.5 | superStackRiConfiguration | 0 | 0 | This parameter describes the physical configured state of Ring In. Ring In is disabled if there is another Ring In within the ca… |
| 1.3.6.1.4.1.260.1.3.2.2.1.6 | superStackHubRiFTolState | 0 | 0 | This parameter controls the Ring In (RI) fault tolerance behavior. Off(1) means that phantom current is not used on the correspon… |
| 1.3.6.1.4.1.260.1.3.2.2.1.7 | superStackHubRiMask | 0 | 0 | Administrative status for this Ring In port. By setting this parameter, a remote manager can control the partitioning of this por… |
| 1.3.6.1.4.1.260.1.3.2.2.1.8 | superStackHubRiPhDet | 0 | 0 | This parameter describes the phantom detect status for this Ring In port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.9 | superStackHubRiNsrtStatus | 0 | 0 | Insertion status for this Ring In port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.10 | superStackHubRiBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic bea… |
| 1.3.6.1.4.1.260.1.3.2.2.1.11 | superStackRoConfiguration | 0 | 0 | This parameter describes the physical configured state of Ring Out. Ring Out is disabled if there is another Ring Out within the… |
| 1.3.6.1.4.1.260.1.3.2.2.1.12 | superStackHubRoFTolState | 0 | 0 | This parameter controls the Ring Out(RO) fault tolerance behavior. Off(1) means that phantom current is not used on the correspon… |
| 1.3.6.1.4.1.260.1.3.2.2.1.13 | superStackHubRoMask | 0 | 0 | Administrative status for this Ring Out port. By setting this parameter, a remote manager can control the partitioning of this po… |
| 1.3.6.1.4.1.260.1.3.2.2.1.14 | superStackHubRoPhDet | 0 | 0 | This parameter describes the phantom detect status for this Ring Out port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.15 | superStackHubRoNsrtStatus | 0 | 0 | Insertion status for this Ring Out port. |
| 1.3.6.1.4.1.260.1.3.2.2.1.16 | superStackHubRoBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this port. Automatic bea… |
| 1.3.6.1.4.1.260.1.3.2.2.1.17 | superStackHubCascadeUpMask | 0 | 0 | Administrative status for this Cascade Up connection. By setting this parameter, a remote manager can control the partitioning of… |
| 1.3.6.1.4.1.260.1.3.2.2.1.18 | superStackHubCascadeUpPhDet | 0 | 0 | This parameter describes the phantom detect status for this Cascade Up connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.19 | superStackHubCascadeUpNsrtStatus | 0 | 0 | Insertion status for this Cascade Up connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.20 | superStackHubCascadeUpBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.21 | superStackHubCascadeDownMask | 0 | 0 | Administrative status for this Cascade Down connection. By setting this parameter, a remote manager can control the partitioning … |
| 1.3.6.1.4.1.260.1.3.2.2.1.22 | superStackHubCascadeDownPhDet | 0 | 0 | This parameter describes the phantom detect status for this Cascade Down connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.23 | superStackHubCascadeDownNsrtStatus | 0 | 0 | Insertion status for this Cascade Down connection. |
| 1.3.6.1.4.1.260.1.3.2.2.1.24 | superStackHubCascadeDownBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on this connection. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.25 | superStackHubDataRateState | 0 | 0 | This parameter indicates the current data rate of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.26 | superStackHubDeviceTimeStamp | 0 | 0 | The time the data rate status (was) last changed. |
| 1.3.6.1.4.1.260.1.3.2.2.1.27 | superStackHubMgmtStatus | 0 | 0 | The operational status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.28 | superStackHubProxyAgentID | 0 | 0 | The physical layer MAC Address of the agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.29 | superStackHubAttachedAgentType | 0 | 0 | The type of the attached agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.30 | superStackHubAttachedAgentState | 0 | 0 | The state of the attached agent. |
| 1.3.6.1.4.1.260.1.3.2.2.1.32 | superStackHubTemperatureStatus | 0 | 0 | The temperature status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.33 | superStackHubPowerStatus | 0 | 0 | The power status of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.34 | superStackHubAutoRecovControl | 0 | 0 | This parameter controls the auto recovery operation of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.35 | superStackHubAutoRecovRetries | 0 | 0 | The number of Auto Recoveries performed by this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.36 | superStackHubCodeVersion | 0 | 0 | The firmware version number of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.37 | superStackHubAutoRecovState | 0 | 0 | The current auto recovery state of this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.38 | superStackHubRawCommandData | 0 | 0 | This is used to send raw 485 serial data to this unit. |
| 1.3.6.1.4.1.260.1.3.2.2.1.39 | superStackHubAutoRecovMode | 0 | 0 | This parameter describes the auto recovery mode. |
| 1.3.6.1.4.1.260.1.3.2.2.1.40 | superStackHubRouterPortPhDet | 0 | 0 | Phantom current status for the router port on rear. A value of 1 corresponds to no phantom current detected. A value of 2 corresp… |
| 1.3.6.1.4.1.260.1.3.2.2.1.41 | superStackHubRouterPortMask | 0 | 0 | Administrative status for the router port on rear. By setting this parameter, a remote manager can control access to the lobe por… |
| 1.3.6.1.4.1.260.1.3.2.2.1.42 | superStackHubRouterPortNsrtStatus | 0 | 0 | Actual insertion status for the router port on rear. A 1 value means that the corresponding station is not connected to the ring.… |
| 1.3.6.1.4.1.260.1.3.2.2.1.43 | superStackHubRouterPortMacAddr | 0 | 0 | The MAC layer address of the station which is attached to the router port on rear. |
| 1.3.6.1.4.1.260.1.3.2.2.1.44 | superStackHubRouterPortBcnRemStatus | 0 | 0 | This parameter describes the result of any automatic beacon removal operations performed by the agent on the router port. Automat… |
| 1.3.6.1.4.1.260.1.3.2.2.1.45 | superStackHubRouterPortBcnRemCause | 0 | 0 | This parameter describes the cause of any automatic beacon removal operations performed by the agent on this port. |