This object configures the parameter which sets the number
of seconds between the sending of a status enquiry message
and the receipt of a response. Applies to the DTE port.
This value is similar in nature to the T392 (T2) parameter
in the standards. Possible values are 5 to 30 in increments
of 5. Default is 15.
Parsed from file eclips_s.mib.txt
Company: None
Module: DL-NEW-DSX1-MIB
This object configures the parameter which sets the number
of seconds between the sending of a status enquiry message
and the receipt of a response. Applies to the DTE port.
This value is similar in nature to the T392 (T2) parameter
in the standards. Possible values are 5 to 30 in increments
of 5. Default is 15.
Parsed from file DL-NEW-DSX1-MIB.mib
Module: DL-NEW-DSX1-MIB
Vendor: Digital Link
Module: DL-NEW-DSX1-MIB
[Automatically extracted from oidview.com]
dlcDTEResponseTimer OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "This object configures the parameter which sets the number of seconds between the sending of a status enquiry message and the receipt of a response. Applies to the DTE port. This value is similar in nature to the T392 (T2) parameter in the standards. Possible values are 5 to 30 in increments of 5. Default is 15." ::= { dlcLMIConfiguration 14 }
dlcDTEResponseTimer OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "This object configures the parameter which sets the number of seconds between the sending of a status enquiry message and the receipt of a response. Applies to the DTE port. This value is similar in nature to the T392 (T2) parameter in the standards. Possible values are 5 to 30 in increments of 5. Default is 15." ::= { dlcLMIConfiguration 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.41.1.14.0 | dlcDTEResponseTimer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.41.1.1 | dlcLMIEnable | 1 | 1 | This object specifies whether to enable or disable LMI Conditioning. |
| 1.3.6.1.4.1.300.200.2.41.1.2 | dlcMaintenanceDLCI | 1 | 1 | This objects specifies the status of the LMI Spoofing. |
| 1.3.6.1.4.1.300.200.2.41.1.3 | dlcManagementDLCI | 1 | 1 | This objects specifies the number of management DLCI between 16 and 991 inclusive. Must not be the same as maintenance DLCI. Defa… |
| 1.3.6.1.4.1.300.200.2.41.1.4 | dlcManagementDLCIEnable | 1 | 1 | This object specifies whether to enable or disable Management DLCI. |
| 1.3.6.1.4.1.300.200.2.41.1.5 | dlcSpoofingProtocolType | 1 | 1 | This objects configures which LMI message type to 'spoof', in the event that spoofing is activated. The possible choices are FRF … |
| 1.3.6.1.4.1.300.200.2.41.1.6 | dlcDTESpoofingEnable | 1 | 1 | If the value of this object is 'enabled', LMI spoofing to the DTE port is done automatically. |
| 1.3.6.1.4.1.300.200.2.41.1.7 | dlcNetSpoofingEnable | 1 | 1 | If the value of this object is 'enabled', LMI spoofing to the Network port is done automatically. |
| 1.3.6.1.4.1.300.200.2.41.1.8 | dlcLinkIntegrityVerificationPollingTimer | 1 | 1 | This object is the interval in seconds between Link Integrity Verification Messages. This is known as T391 in the standards. Poss… |
| 1.3.6.1.4.1.300.200.2.41.1.9 | dlcFullStatusPollingCounter | 1 | 1 | This value corresponds to N391 in the ITU and ANSI standards. It is the number of polling cycles of the type before the unit gene… |
| 1.3.6.1.4.1.300.200.2.41.1.10 | dlcLMIErrorEvent | 1 | 1 | This object configures the parameter which sets the number of errors that can occur on the LMI link in LMI Error Monitored Events… |
| 1.3.6.1.4.1.300.200.2.41.1.11 | dlcLMIErrorMonitorEvent | 1 | 1 | This object configures parameter which sets the number of events that are used with the LMI Error Event to define the error ratio… |
| 1.3.6.1.4.1.300.200.2.41.1.12 | dlcLMIErrorFreeEvent | 1 | 1 | This object configures the parameter which sets the number of error-free messages that must be received in LMI Error Free Monitor… |
| 1.3.6.1.4.1.300.200.2.41.1.13 | dlcLMIErrorFreeMonitorEvent | 1 | 1 | This object configures parameter which sets the number of events that are used with the LMI Error Free Event to define the error … |
| 1.3.6.1.4.1.300.200.2.41.1.15 | dlcLMIUnitLocation | 1 | 1 | This object configures where the unit is located so that LMI spoofing could be done properly. If 'cpe' is selected, it means the … |