This object configures where the unit is located so that LMI
spoofing could be done properly. If 'cpe' is selected, it means
the unit is located in Customer Premise. If 'co' is selected,
the unit is in Central Office.
Parsed from file eclips_s.mib.txt
Company: None
Module: DL-NEW-DSX1-MIB
This object configures where the unit is located so that LMI
spoofing could be done properly. If 'cpe' is selected, it means
the unit is located in Customer Premise. If 'co' is selected,
the unit is in Central Office.
Parsed from file DL-NEW-DSX1-MIB.mib
Module: DL-NEW-DSX1-MIB
Vendor: Digital Link
Module: DL-NEW-DSX1-MIB
[Automatically extracted from oidview.com]
dlcLMIUnitLocation OBJECT-TYPE SYNTAX INTEGER { cpe (1), co (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object configures where the unit is located so that LMI spoofing could be done properly. If 'cpe' is selected, it means the unit is located in Customer Premise. If 'co' is selected, the unit is in Central Office." ::= { dlcLMIConfiguration 15 }
dlcLMIUnitLocation OBJECT-TYPE SYNTAX INTEGER { cpe (1), co (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object configures where the unit is located so that LMI spoofing could be done properly. If 'cpe' is selected, it means the unit is located in Customer Premise. If 'co' is selected, the unit is in Central Office." ::= { dlcLMIConfiguration 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.41.1.15.0 | dlcLMIUnitLocation | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.300.200.2.41.1.1 | dlcLMIEnable | 1 | 1 | This object specifies whether to enable or disable LMI Conditioning. |
| 1.3.6.1.4.1.300.200.2.41.1.2 | dlcMaintenanceDLCI | 1 | 1 | This objects specifies the status of the LMI Spoofing. |
| 1.3.6.1.4.1.300.200.2.41.1.3 | dlcManagementDLCI | 1 | 1 | This objects specifies the number of management DLCI between 16 and 991 inclusive. Must not be the same as maintenance DLCI. Defa… |
| 1.3.6.1.4.1.300.200.2.41.1.4 | dlcManagementDLCIEnable | 1 | 1 | This object specifies whether to enable or disable Management DLCI. |
| 1.3.6.1.4.1.300.200.2.41.1.5 | dlcSpoofingProtocolType | 1 | 1 | This objects configures which LMI message type to 'spoof', in the event that spoofing is activated. The possible choices are FRF … |
| 1.3.6.1.4.1.300.200.2.41.1.6 | dlcDTESpoofingEnable | 1 | 1 | If the value of this object is 'enabled', LMI spoofing to the DTE port is done automatically. |
| 1.3.6.1.4.1.300.200.2.41.1.7 | dlcNetSpoofingEnable | 1 | 1 | If the value of this object is 'enabled', LMI spoofing to the Network port is done automatically. |
| 1.3.6.1.4.1.300.200.2.41.1.8 | dlcLinkIntegrityVerificationPollingTimer | 1 | 1 | This object is the interval in seconds between Link Integrity Verification Messages. This is known as T391 in the standards. Poss… |
| 1.3.6.1.4.1.300.200.2.41.1.9 | dlcFullStatusPollingCounter | 1 | 1 | This value corresponds to N391 in the ITU and ANSI standards. It is the number of polling cycles of the type before the unit gene… |
| 1.3.6.1.4.1.300.200.2.41.1.10 | dlcLMIErrorEvent | 1 | 1 | This object configures the parameter which sets the number of errors that can occur on the LMI link in LMI Error Monitored Events… |
| 1.3.6.1.4.1.300.200.2.41.1.11 | dlcLMIErrorMonitorEvent | 1 | 1 | This object configures parameter which sets the number of events that are used with the LMI Error Event to define the error ratio… |
| 1.3.6.1.4.1.300.200.2.41.1.12 | dlcLMIErrorFreeEvent | 1 | 1 | This object configures the parameter which sets the number of error-free messages that must be received in LMI Error Free Monitor… |
| 1.3.6.1.4.1.300.200.2.41.1.13 | dlcLMIErrorFreeMonitorEvent | 1 | 1 | This object configures parameter which sets the number of events that are used with the LMI Error Free Event to define the error … |
| 1.3.6.1.4.1.300.200.2.41.1.14 | dlcDTEResponseTimer | 1 | 1 | This object configures the parameter which sets the number of seconds between the sending of a status enquiry message and the rec… |