The version of software running on the
Hub. On versions of the Hub that support
dynamic download, this variable may be
set to cause a new version of the
software to be loaded the next time
the Hub is reset (as in setting the
variable hub1Reset or power cycling the
unit). The version should be specified in
the following format:
'MM.mm.rr'
Where MM is the major number, mm is the
minor number, and rr is the revision level
(for example 2.0.16).
On versions of the Hub that do not support
dynamic download, setting this variable
will result in an error.
Parsed from file NRC_mib.txt
Company: None
Module: NRC-MultiGate
The version of software running on the
Hub. On versions of the Hub that support
dynamic download, this variable may be
set to cause a new version of the
software to be loaded the next time
the Hub is reset (as in setting the
variable hub1Reset or power cycling the
unit). The version should be specified in
the following format:
'MM.mm.rr'
Where MM is the major number, mm is the
minor number, and rr is the revision level
(for example 2.0.16).
On versions of the Hub that do not support
dynamic download, setting this variable
will result in an error.
Parsed from file NRC-MultiGate.mib
Module: NRC-MultiGate
Vendor: Network Resources Corporation
Module: NRC-HUB1-MIB
[Automatically extracted from oidview.com]
hub1SoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cause a new version of the software to be loaded the next time the Hub is reset (as in setting the variable hub1Reset or power cycling the unit). The version should be specified in the following format: 'MM.mm.rr' Where MM is the major number, mm is the minor number, and rr is the revision level (for example 2.0.16). On versions of the Hub that do not support dynamic download, setting this variable will result in an error." ::= { hub1 14 }
hub1SoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cause a new version of the software to be loaded the next time the Hub is reset (as in setting the variable hub1Reset or power cycling the unit). The version should be specified in the following format: 'MM.mm.rr' Where MM is the major number, mm is the minor number, and rr is the revision level (for example 2.0.16). On versions of the Hub that do not support dynamic download, setting this variable will result in an error." ::= { hub1 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.315.1.14.0 | hub1SoftwareVersion | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.315.1.1 | hub1AutoPartition | 1 | 1 | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
1.3.6.1.4.1.315.1.2 | hub1ReconnectOnTransmission | 1 | 1 | None |
1.3.6.1.4.1.315.1.3 | hub1IncludeOutOfWinColl | 1 | 1 | None |
1.3.6.1.4.1.315.1.4 | hub1LoopbackPartition | 1 | 1 | None |
1.3.6.1.4.1.315.1.5 | hub1CollisionLimit | 1 | 1 | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the… |
1.3.6.1.4.1.315.1.6 | hub1CarrierRecoverTime | 1 | 1 | None |
1.3.6.1.4.1.315.1.7 | hub1EventCounterFlags | 1 | 1 | None |
1.3.6.1.4.1.315.1.8 | hub1EventRecordFlags | 1 | 1 | A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detec… |
1.3.6.1.4.1.315.1.9 | hub1BridgingMode | 1 | 1 | Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables… |
1.3.6.1.4.1.315.1.10 | hub1ProtocolFilterMode | 1 | 1 | None |
1.3.6.1.4.1.315.1.11 | hub1FilterProtocols | 1 | 1 | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries… |
1.3.6.1.4.1.315.1.12 | hub1ConsoleBaudRate | 1 | 1 | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
1.3.6.1.4.1.315.1.13 | hub1Reset | 1 | 1 | Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object… |
1.3.6.1.4.1.315.1.15 | hub1PortTable | 1 | 11 | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
1.3.6.1.4.1.315.1.16 | hub1IFTable | 1 | 14 | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
1.3.6.1.4.1.315.1.17 | hub1LastFailureReason | 1 | 1 | None |