Operational mode of the bridge:
bridging Packets are being
selectively forwarded
according to the internal
dynamically built tables.
bypass All packets are being
repeated between the
backbone and the repeater
ports. The bridge logic
is disabled.
After setting this variable the HUB
must be reset for the new value to take
effect.
NOTE: FOIRL Hubs can only have the
value 'bypass' for this variable.
Attempts to set this variable to
'bridging' on FOIRL hubs will be
rejected.
Parsed from file NRC_mib.txt
Company: None
Module: NRC-MultiGate
Operational mode of the bridge:
bridging Packets are being
selectively forwarded
according to the internal
dynamically built tables.
bypass All packets are being
repeated between the
backbone and the repeater
ports. The bridge logic
is disabled.
After setting this variable the HUB
must be reset for the new value to take
effect.
NOTE: FOIRL Hubs can only have the
value 'bypass' for this variable.
Attempts to set this variable to
'bridging' on FOIRL hubs will be
rejected.
Parsed from file NRC-MultiGate.mib
Module: NRC-MultiGate
Vendor: Network Resources Corporation
Module: NRC-HUB1-MIB
[Automatically extracted from oidview.com]
hub1BridgingMode OBJECT-TYPE SYNTAX INTEGER { bridging (1), bypass (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables. bypass All packets are being repeated between the backbone and the repeater ports. The bridge logic is disabled. After setting this variable the HUB must be reset for the new value to take effect. NOTE: FOIRL Hubs can only have the value 'bypass' for this variable. Attempts to set this variable to 'bridging' on FOIRL hubs will be rejected." ::= { hub1 9 }
hub1BridgingMode OBJECT-TYPE SYNTAX INTEGER { bridging (1), bypass (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables. bypass All packets are being repeated between the backbone and the repeater ports. The bridge logic is disabled. After setting this variable the HUB must be reset for the new value to take effect. NOTE: FOIRL Hubs can only have the value 'bypass' for this variable. Attempts to set this variable to 'bridging' on FOIRL hubs will be rejected." ::= { hub1 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.315.1.9.0 | hub1BridgingMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.315.1.1 | hub1AutoPartition | 1 | 1 | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
| 1.3.6.1.4.1.315.1.2 | hub1ReconnectOnTransmission | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.3 | hub1IncludeOutOfWinColl | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.4 | hub1LoopbackPartition | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.5 | hub1CollisionLimit | 1 | 1 | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the… |
| 1.3.6.1.4.1.315.1.6 | hub1CarrierRecoverTime | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.7 | hub1EventCounterFlags | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.8 | hub1EventRecordFlags | 1 | 1 | A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detec… |
| 1.3.6.1.4.1.315.1.10 | hub1ProtocolFilterMode | 1 | 1 | None |
| 1.3.6.1.4.1.315.1.11 | hub1FilterProtocols | 1 | 1 | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries… |
| 1.3.6.1.4.1.315.1.12 | hub1ConsoleBaudRate | 1 | 1 | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
| 1.3.6.1.4.1.315.1.13 | hub1Reset | 1 | 1 | Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object… |
| 1.3.6.1.4.1.315.1.14 | hub1SoftwareVersion | 1 | 1 | The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cau… |
| 1.3.6.1.4.1.315.1.15 | hub1PortTable | 1 | 11 | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
| 1.3.6.1.4.1.315.1.16 | hub1IFTable | 1 | 14 | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
| 1.3.6.1.4.1.315.1.17 | hub1LastFailureReason | 1 | 1 | None |