bundleRestoreMethod defines how a dropped
link of a multilink bundle will be restored.
It can be done either manually or
automatically. If the restore mode is
automatic, the parameter bundleLinkRestoralTime
should be set (in seconds) during the same
request.
Parsed from file tiaranet-bundle.mib.txt
Company: None
Module: TIARA-BUNDLE-MIB
bundleRestoreMethod defines how a dropped
link of a multilink bundle will be restored.
It can be done either manually or
automatically. If the restore mode is
automatic, the parameter bundleLinkRestoralTime
should be set (in seconds) during the same
request.
Parsed from file TIARA-BUNDLE-MIB.mib
Module: TIARA-BUNDLE-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-BUNDLE-MIB
[Automatically extracted from oidview.com]
bundleRestoreMethod OBJECT-TYPE SYNTAX INTEGER { manual(1), automatic(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is automatic, the parameter bundleLinkRestoralTime should be set (in seconds) during the same request." DEFVAL { automatic } ::= { bundleTableEntry 13 }
bundleRestoreMethod OBJECT-TYPE SYNTAX INTEGER { manual(1), automatic(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is automatic, the parameter bundleLinkRestoralTime should be set (in seconds) during the same request." DEFVAL { automatic } ::= { bundleTableEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.13.1.1.1 | bundleId | 0 | 0 | bundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned interna… |
| 1.3.6.1.4.1.3174.2.13.1.1.2 | bundleName | 0 | 0 | Name of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. Th… |
| 1.3.6.1.4.1.3174.2.13.1.1.3 | bundleContact | 0 | 0 | Name of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters.… |
| 1.3.6.1.4.1.3174.2.13.1.1.4 | bundleDescr | 0 | 0 | Brief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundl… |
| 1.3.6.1.4.1.3174.2.13.1.1.5 | bundleEncapsulation | 0 | 0 | Specifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle m… |
| 1.3.6.1.4.1.3174.2.13.1.1.6 | bundleDropEs | 0 | 0 | The length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be con… |
| 1.3.6.1.4.1.3174.2.13.1.1.7 | bundleDropSes | 0 | 0 | The length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter c… |
| 1.3.6.1.4.1.3174.2.13.1.1.8 | bundleDropUas | 0 | 0 | The length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be… |
| 1.3.6.1.4.1.3174.2.13.1.1.9 | bundleIpAddr | 0 | 0 | The bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can … |
| 1.3.6.1.4.1.3174.2.13.1.1.10 | bundleSubnetMask | 0 | 0 | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a b… |
| 1.3.6.1.4.1.3174.2.13.1.1.11 | bundleSrcForwardingAddrPrimary | 0 | 0 | The bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This paramete… |
| 1.3.6.1.4.1.3174.2.13.1.1.12 | bundleSrcForwardingAddrSecondary | 0 | 0 | The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet inte… |
| 1.3.6.1.4.1.3174.2.13.1.1.14 | bundleLinkRestoralTime | 0 | 0 | Error-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the b… |
| 1.3.6.1.4.1.3174.2.13.1.1.15 | bundleStatus | 0 | 0 | bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters a… |
| 1.3.6.1.4.1.3174.2.13.1.1.16 | bundleLinkRestore | 0 | 0 | bundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod… |
| 1.3.6.1.4.1.3174.2.13.1.1.17 | bundleNoOfLinks | 0 | 0 | Indicates the number of links configured in the bundle. |
| 1.3.6.1.4.1.3174.2.13.1.1.18 | bundleTotalBw | 0 | 0 | Indicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a… |
| 1.3.6.1.4.1.3174.2.13.1.1.19 | bundleRowStatus | 0 | 0 | bundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a … |