bundleStatus shutdowns the bundle. Although
the default is 'enable,' the bundle remains
disabled until all necessary parameters are
present
Parsed from file tiaranet-bundle.mib.txt
Company: None
Module: TIARA-BUNDLE-MIB
bundleStatus shutdowns the bundle. Although
the default is 'enable,' the bundle remains
disabled until all necessary parameters are
present
Parsed from file TIARA-BUNDLE-MIB.mib
Module: TIARA-BUNDLE-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-BUNDLE-MIB
[Automatically extracted from oidview.com]
bundleStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are present" DEFVAL { enable } ::= { bundleTableEntry 15 }
bundleStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are present" DEFVAL { enable } ::= { bundleTableEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.13.1.1.1 | bundleId | 0 | 0 | bundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned interna… |
| 1.3.6.1.4.1.3174.2.13.1.1.2 | bundleName | 0 | 0 | Name of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. Th… |
| 1.3.6.1.4.1.3174.2.13.1.1.3 | bundleContact | 0 | 0 | Name of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters.… |
| 1.3.6.1.4.1.3174.2.13.1.1.4 | bundleDescr | 0 | 0 | Brief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundl… |
| 1.3.6.1.4.1.3174.2.13.1.1.5 | bundleEncapsulation | 0 | 0 | Specifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle m… |
| 1.3.6.1.4.1.3174.2.13.1.1.6 | bundleDropEs | 0 | 0 | The length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be con… |
| 1.3.6.1.4.1.3174.2.13.1.1.7 | bundleDropSes | 0 | 0 | The length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter c… |
| 1.3.6.1.4.1.3174.2.13.1.1.8 | bundleDropUas | 0 | 0 | The length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be… |
| 1.3.6.1.4.1.3174.2.13.1.1.9 | bundleIpAddr | 0 | 0 | The bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can … |
| 1.3.6.1.4.1.3174.2.13.1.1.10 | bundleSubnetMask | 0 | 0 | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a b… |
| 1.3.6.1.4.1.3174.2.13.1.1.11 | bundleSrcForwardingAddrPrimary | 0 | 0 | The bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This paramete… |
| 1.3.6.1.4.1.3174.2.13.1.1.12 | bundleSrcForwardingAddrSecondary | 0 | 0 | The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet inte… |
| 1.3.6.1.4.1.3174.2.13.1.1.13 | bundleRestoreMethod | 0 | 0 | bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatic… |
| 1.3.6.1.4.1.3174.2.13.1.1.14 | bundleLinkRestoralTime | 0 | 0 | Error-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the b… |
| 1.3.6.1.4.1.3174.2.13.1.1.16 | bundleLinkRestore | 0 | 0 | bundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod… |
| 1.3.6.1.4.1.3174.2.13.1.1.17 | bundleNoOfLinks | 0 | 0 | Indicates the number of links configured in the bundle. |
| 1.3.6.1.4.1.3174.2.13.1.1.18 | bundleTotalBw | 0 | 0 | Indicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a… |
| 1.3.6.1.4.1.3174.2.13.1.1.19 | bundleRowStatus | 0 | 0 | bundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a … |