This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
b8zs refers to the use of a specified pattern
of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
ami refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.
Parsed from file tiaranet-dsx-te1.mib.txt
Company: None
Module: TIARA-NETWORKS-DSX-TE1-MIB
This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
b8zs refers to the use of a specified pattern
of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
ami refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.
Parsed from file TIARA-NETWORKS-DSX-TE1-MIB.mib
Module: TIARA-NETWORKS-DSX-TE1-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-NETWORKS-DSX-TE1-MIB
[Automatically extracted from oidview.com]
dsxT1E1IfConfigLineCode OBJECT-TYPE SYNTAX INTEGER { linecode-b8zs (2), linecode-ami (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { dsxT1E1IfConfigLineEntry 5 }
dsxT1E1IfConfigLineCode OBJECT-TYPE SYNTAX INTEGER { linecode-b8zs (2), linecode-ami (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data." ::= { dsxT1E1IfConfigLineEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.1 | dsxT1E1IfIndex | 0 | 0 | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds1 |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.2 | dsxT1E1IfConfigServiceMode | 0 | 0 | Indicates the T1/E1 interface is in service if it is TRUE. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.3 | dsxT1E1IfConfigLineMode | 0 | 0 | Line Mode for this T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.4 | dsxT1E1IfConfigLineType | 0 | 0 | This variable indicates the variety of T1/E1 interpretation of the usage and error statistics. The values, in sequence, describe… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.6 | dsxT1E1IfConfigLBO | 0 | 0 | Signal attenuation at 772 kHz lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db lbo-75-db carrier advised LBO code B … |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.7 | dsxT1E1IfConfigCableLength | 0 | 0 | This variable specifies the length of the cable in feet. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.8 | dsxT1E1IfConfigRaiAlarm | 0 | 0 | Configurition of Remote Alarm Indication Alarm generation and detection. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.9 | dsxT1E1IfConfigTransmitClock | 0 | 0 | The source of Transmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.10 | dsxT1E1IfConfigTimeSlotMap | 0 | 0 | Time slot map of the T1/E1 line that are being used if it is used corresponding bit position is set. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.11 | dsxT1E1IfCircuitId, dsxT1E1IfConfigCableType | 0 | 0 | The cable type that is being used. 'cable-type-coax' indicates that the cable is coaxial and the impedance is 75 ohm 'cable-type-… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.12 | dsxT1E1IfContactInfo, dsxT1E1IfCircuitId | 0 | 0 | None |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.13 | dsxT1E1IfDescription, dsxT1E1IfContactInfo | 0 | 0 | None |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.14 | dsxT1E1IfDescription | 0 | 0 | None |