Signal attenuation at 772 kHz
lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db
lbo-75-db carrier advised LBO code B 7.5 - 13.0 db
lbo-15-db carrier advised LBO code C 15.0 - 22.0 db
This variable can be set only for CSU linemode
Parsed from file tiaranet-dsx-te1.mib.txt
Company: None
Module: TIARA-NETWORKS-DSX-TE1-MIB
Signal attenuation at 772 kHz
lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db
lbo-75-db carrier advised LBO code B 7.5 - 13.0 db
lbo-15-db carrier advised LBO code C 15.0 - 22.0 db
This variable can be set only for CSU linemode
Parsed from file TIARA-NETWORKS-DSX-TE1-MIB.mib
Module: TIARA-NETWORKS-DSX-TE1-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-NETWORKS-DSX-TE1-MIB
[Automatically extracted from oidview.com]
dsxT1E1IfConfigLBO OBJECT-TYPE SYNTAX INTEGER { lbo-zero-db (1), lbo-75-db (2), lbo-15-db (3), lbo-225-db (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Signal attenuation at 772 kHz lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db lbo-75-db carrier advised LBO code B 7.5 - 13.0 db lbo-15-db carrier advised LBO code C 15.0 - 22.0 db This variable can be set only for CSU linemode" ::= { dsxT1E1IfConfigLineEntry 6 }
dsxT1E1IfConfigLBO OBJECT-TYPE SYNTAX INTEGER { lbo-zero-db (1), lbo-75-db (2), lbo-15-db (3), lbo-225-db (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Signal attenuation at 772 kHz lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db lbo-75-db carrier advised LBO code B 7.5 - 13.0 db lbo-15-db carrier advised LBO code C 15.0 - 22.0 db This variable can be set only for CSU linemode" ::= { dsxT1E1IfConfigLineEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.1 | dsxT1E1IfIndex | 0 | 0 | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds1 |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.2 | dsxT1E1IfConfigServiceMode | 0 | 0 | Indicates the T1/E1 interface is in service if it is TRUE. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.3 | dsxT1E1IfConfigLineMode | 0 | 0 | Line Mode for this T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.4 | dsxT1E1IfConfigLineType | 0 | 0 | This variable indicates the variety of T1/E1 interpretation of the usage and error statistics. The values, in sequence, describe… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.5 | dsxT1E1IfConfigLineCode | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characterist… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.7 | dsxT1E1IfConfigCableLength | 0 | 0 | This variable specifies the length of the cable in feet. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.8 | dsxT1E1IfConfigRaiAlarm | 0 | 0 | Configurition of Remote Alarm Indication Alarm generation and detection. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.9 | dsxT1E1IfConfigTransmitClock | 0 | 0 | The source of Transmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.10 | dsxT1E1IfConfigTimeSlotMap | 0 | 0 | Time slot map of the T1/E1 line that are being used if it is used corresponding bit position is set. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.11 | dsxT1E1IfCircuitId, dsxT1E1IfConfigCableType | 0 | 0 | The cable type that is being used. 'cable-type-coax' indicates that the cable is coaxial and the impedance is 75 ohm 'cable-type-… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.12 | dsxT1E1IfContactInfo, dsxT1E1IfCircuitId | 0 | 0 | None |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.13 | dsxT1E1IfDescription, dsxT1E1IfContactInfo | 0 | 0 | None |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.14 | dsxT1E1IfDescription | 0 | 0 | None |